Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread John Read via CnC-List
Installed a SHURflo strainer many years ago on raw water inlet. Never a problem. Easy screw off cup, clean screen screw back on. Just screw off and drain cup when winterizing. No special mounting is just in line in hose. Defender $37. John Read Legacy III 1982 C&C 34 Noank, CT Pleas

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread Marek Dziedzic via CnC-List
If this is the Graco filter with the transparent cup, and if you winterize your engine with the antifreeze, make sure that you drain the AF from this filter before winter. The cup has a tendency to craze with AF left in it. Guess how I know Marek 1994 C270 Legato Ottawa, ON Sent from my An

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread Glen Eddie via CnC-List
I would love to see pictures if possible. It's The raw intake side I'm looking at as I'm on lake ontario. Thanks Get Outlook for Android Glen Eddie Legal services provided through J. Glen Eddie Professional Corporation Tel: 416-777-5357 Fax: 1-888-812-2557 ged...@t

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread Glen Eddie via CnC-List
Yes. That is my concern/issue. Where to put it on a 35 mk I. Get Outlook for Android From: Barry McKee via CnC-List Sent: Monday, April 8, 2024 12:58:42 PM To: 'Stus-List' Cc: virb...@cogeco.ca Subject: Stus-List Re: raw water filter se

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread Dennis C. via CnC-List
Had my air conditioner intake plug a few times when in a slip in a stagnant corner of a marina where trash accumulated. Things stuck in the elbow on top of the thru hull. I have a tee with garden hose hookup and a valve on the discharge so I can blow it out. Contributory to the problem was it wa

Stus-List Re: Bilge pump breaker issue

2024-04-08 Thread cenelson--- via CnC-List
Thanks Dave and Joel for your suggestions—easy to check with multimeter or without. I can’t remember how long it’s been since I replaced the pump/switch so I doubt it’s the wiring which has been securely zip-tied to my centerboard pennant ‘tube’ for the same unknown years. Charlie Sent from th

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread David Knecht via CnC-List
Interesting discussion. The only time I have had my raw water intake plugged was when I ran the engine in a grassy area while at anchor. In that case, the grass plugged up the through hull and never got to the strainer. The admiral dived down and cleared it by hand by pulling the weeds out.

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread Dennis C. via CnC-List
Glen, Touche' no longer has an Atomic 4 but below is a link to the raw water strainer on Touche'. It's accessible from the starboard lazarette locker. The strainer is a Perko. Mine has a short glass, not the standard length. With a standard glass, it would be too tall. https://drive.google.com

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread Doug Mountjoy via CnC-List
All this talk about sea strainers makes me think I should see it mine is getting plugged. It's been over 1100 miles since I launched last fall. Lots of sea life but not much in the way of growth down here. Douglas Mountjoy 1988 C&C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Mon, Apr

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread Barry McKee via CnC-List
I installed a Vetus raw water filter on my Atomic 4. Only challenge was where to locate the filter itself. Connecting to the Atomic 4 was a snap. Barry McKee C&C 29 Mk I From: Matthew Wolford via CnC-List [mailto:cnc-list@cnc-list.com] Sent: 8-Apr-24 11:42 AM To: 'Stus-List' Cc: Mat

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread Neil Gallagher via CnC-List
Glen, I installed a Groco strainer, mounted it low on the forward bulkhead in the Lazarette under the starboard seat. Just screwed the mounting fixture to the bulkhead and ran hoses from the thru hull to the strainer and from the strainer to the raw water pump. //I used two 90-deg bronze elbo

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread Dave S via CnC-List
Glen - I had a bronze and glass strainer basket - maybe groco - on my 33-2.  I sailed out of Whitby ON and the strainer did its job in shallow, weedy places like Frenchman’s bay and presquile bay.    Glad I had it.   Dave Sent from my iPhoneOn Apr 8, 2024, at 11:43 AM, Matthew Wolford via CnC-List

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread Bill Coleman via CnC-List
Couple of years ago, at winterization time, I unscrewed the cap on My Engine Groco Filter and found a perfect little bass just through the input laying on the screen! I couldn't believe he got pulled through that far! Bill Coleman Erie PA On Mon, Apr 8, 2024 at 11:42 AM Matthew Wolford via CnC-Li

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread Karl Kuzis via CnC-List
I would be interested in the pictures as well. I have parts but haven't pulled the trigger on creative A4 intake plumbing yet. Karl Kuzis Firefly C&C 29 On Mon, Apr 8, 2024, 6:41 AM Bob Mann via CnC-List wrote: > Hi Eddie, > > I did it to my mark I within the last three years. Nearly 50 years w

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread Matthew Wolford via CnC-List
I installed Groco filters on my 34 and 42 Custom. Better than sucking a plastic bag or weeds into your system. From: Glen Eddie via CnC-List Sent: Monday, April 8, 2024 9:00 AM To: cnc-list@cnc-list.com Cc: Glen Eddie Subject: Stus-List raw water filter set up for C&c 35 MkI Hello eve

Stus-List Re: Bilge pump breaker issue

2024-04-08 Thread Dave S via CnC-List
Use a multimeter to measure resistance, +12v to  ground, from the load (pump) side of the breaker, with the breaker open, and the float switch open.   It should show infinite resistance.  If it shows very low or no resistance, you have a short.  Disconnect the pump/switch.    If the problem persist

Stus-List Re: Bilge pump breaker issue

2024-04-08 Thread Joel Aronson via CnC-List
When you cut the wires for the pump, turn on the switch. If there is a short in the wires the breaker will trip. Otherwise it is the pump. On Sun, Apr 7, 2024 at 10:09 PM cenelson--- via CnC-List < cnc-list@cnc-list.com> wrote: > My bilge pump breaker has recently started to disconnect immediat

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread Paul Hood via CnC-List
My boat seams to have had one from previous owner. Just remember to drain it prior to winter as it will freeze excess water in there and crack. Paul Hood REFUGE – 1981 C&C34 on Georgian Bay /) From: Bob Mann via CnC-List Sent: Monday, April 8, 2024 9:41 AM To: Stus-List Cc: Bob Ma

Stus-List Re: raw water filter set up for C&c 35 MkI

2024-04-08 Thread Bob Mann via CnC-List
Hi Eddie,   I did it to my mark I within the last three years. Nearly 50 years without one but I'm glad i did it. If I don't have any pictures I can take some next weekend for you.    Bob Mystic On 04/08/2024 9:00 AM EDT

Stus-List raw water filter set up for C&c 35 MkI

2024-04-08 Thread Glen Eddie via CnC-List
Hello everyone, I was wondering whether anyone has installed a water intake filter system for the raw water intake on an atomic 4. Specifically, the water thru haul is pretty close to the water pump hook up and any filter that is not an inline filter would require some right angles on the plum