Hi guys, I'm trying to work towards getting the boat ready for a trip south
starting summer 2020 and one of the big things on my mind is the original
aluminum holding tank, which I'm told will eventually start leaking and get
a new plastic one in there, problem is getting it out, short story: frien
Mine was rod upper and lower with no backstay adjuster at all. This year I
had the lowers made to wire to I could add a simple haul down tensioner,
works great except I have to go up and put a smaller metal ring between the
two wire blocks so when loose it will ride higher up, it's probably about a
Hi, saw a similar post, I'm going through the same thing. 1989 C&C 37/40+,
current prop Martec 2 blade fixed 15x9x1 1/8, always thought I was a bit
too small (meaning needing one more blade), is it wrong to assume I just
need the same size just one more blade? What do other 37/40 owners have?
Best
Has anyone any experience replacing the oil seal at the back of the
Sherwood raw water pump? I have the replacement oil seal part number 18806,
cost 20.82, it has a green outer casing and looks like it should slide
right into the end of the pump body that faces the engine, however that
bore seems t
Hi all, first time replying to anything here, no idea if I'm doing this
right or not.
This was our first summer with a 1989 37/40+, it has a Webasto diesel
heater mounted in the locker with the engine controls, installed by the
previous owner, have never tried it, assuming all works but we have no