Hello:
I have a 1985 CNC 33-2. I have been using the same main halyard for the
last three years. Every winter I connect a line to it and pull it up and
store the main halyard in the mast over the winter. I went to bring it
down it does not want to come down. I am able to pull it down 6" and p
Hello, I have a 1985 C&C 33-2. I am looking to replacement my bilge pump
and looking for a recommended model. Anyone with some insight to what is
the best. I would greatly appreciate it.
Thanks,
Ray Macklin
LakeHouse
Milwaukee, WI
Thanks to all of the subscribers that contributed to the list to
Hello:
Instead of replacing the Plexi Glass tradition windows, I am looking to
replace my windows aluminum frames. Has anyone do this and if so what
windows were they and if you could provide details on how you did it.
Thanks,
Ray
LakeHouse, Milwaukee WI
October is the time to show your appreci
Everyone:
For the past several years, at the beginning of the season, I have been
sanding the bottom and have painted it with VC-17. I am no longer going
to be racing. It is fresh water boat. I am reaching out to determine what
bottom paint i should go with that is less work every year. Pleas
Ok everyone. I am stepping up and finally going to replace my windows. I
am open to any information or suggestions. I was thinking of replacing
them with aluminum frame windows. Any thoughts or guidance with this
project. All input is appreciated.
Thanks
Ray Macklin
LakeHouse
Milwaukee WI
I am in the process of changing my head in my 1985 C&C 33-2 and since the
hose connected to the head and the waste tank was old. I figured I would
replace that to while I am at it. Questions:
1. Is the original waste hoses Shields 310 Fuel Hoses?
2. If they are, why did C&C use a Very Very Very
Hello:
I have a 1985 C&C 33 and i am looking to replace the manual toilet. I
want to replace it with one that has the same foot print for fastening it.
Does anyone know what i can replace it with to match and where could locate
one? The old paperwork indicates it might have been a W.C Marin Mar
Hello:
1985 C&C 33-2. I misplaced the part on the mast that holds the sail slides
in the mast track. Does anyone know where i can get a replacement?
Ray Macklin
LakeHouse
Milwaukee WI.
___
Thanks everyone for supporting this list with your contributi
Hello:
1985 C&C 33-2. I misplaced the part on the mast that holds the sail slides
in the mast track. Does anyone know where i can get a replacement?
Ray Macklin
LakeHouse
Milwaukee WI.
___
Thanks everyone for supporting this list with your contributi
1985 C&C 33-2 and I am looking to do maintenance on two Barient 23 Winch,
Number 3985340. I have never taken apart one. I am reaching out for
advise and guidance, instructions, part replacements , grease brand and any
other help in completing this project would be greatly appreciated.
Thanks,
Ra
Hello:
I have a 1985 C&C 33-2
With the different types of cords and cost, I am looking for some advise
for what thickness and brand i should use when changing the stuffing box.
Any advise or instructions would be greatly appreciated.
Ray
LakeHouse
Milwaukee, WI
__
I have two batteries that I am looking for information on how to Maintain
my batteries over the winter. What charger to purchase and process to
follow. Any information would be greatly appreciated.
Thanks,
Ray
LakeHouse
Milwaukee, WI
___
Thanks everyo
a797-5efdef4d7...@postaudio.net>
> Content-Type: text/plain; charset="utf-8"
>
> Ray ? are these Raymarine ST50/ST60 instruments by any chance? If so,
> they?re all powered (and share data) over SeaTalk1 cabling. There should
> be a power drop from the first instrument i
Everyone:
Nice sunny day breezy day in Milwaukee. It would probably help tell what
my wind direction, depth and speed was if my instruments had power.
I finished the season with everything working. I tested everything and
they only thing that is not working is my wind/speed/ depth.
I never mes
Thanks everyone for the information. I have documented the details of what
everyone has said. One final question, it might be dumb but, where do I
light the stove and how.
Thanks,
Ray
LakeHouse
On Wed, Jun 13, 2018 at 7:37 AM, wrote:
> Send CnC-List mailing list submissions to
> cnc-l
Hello:
It is that time of season for the big Splash. I have run into an issue
since I put it in the water. My bilge pump is running continuously. I
took a close look and I am noticing the water is seeping in from the walls
of the bilge. Prior to launching I took a real close look at the keel.
I am needing to replace my companionway door on my 33. Does anyone know
where I might find one to purchase or suggestions on how to replace it.
Thanks,
Ray Macklin
LakeHouse
Milwaukee, WI
___
This list is supported by the generous donations of our mem
Hello:
I am looking to purchase a Mast Ladder by Kinleven marine and I need to
determine what model number are for the sail slides. They reference
examples R7.2; R8.3; R11.4; F16; F19; F22; HR10.4; HR13.9 are just some of
them. Does anyone have an idea or is anyone looking to sell one.
Thanks,
I have a 1985 C&C 33. I have a question regarding water in the bilge
area. I just put my boat in to start the season. I found that my Bilge
Pump Float switch was not working. I also found that with the boat sitting
in the water, the bilge filled up with water in quite a short time (like it
abou
I have a 1985 C&C33-2 and since it is the beginning of the season, I figure
it is time to replace the leaky windows. Can you provide me your opinion
and instructions of replacing the windows. We were thinking of the
aluminum frame so we can get some ventilation inside the cabin.
Thanks,
Ray
LakeH
I am not familiar with the cradle process and wanted to know how do I get
or find a cradle for my 1985 C&C 33-2?
Ray Macklin
LakeHouse
Milwaukee, WI
___
This list is supported by the generous donations of our members. If you like
what we do, please hel
I have a 1985 C&C 33-2 and need to replacement my windows. I am looking to
go the route of replacing them with windows that open. Has anybody
replaced windows this way before. If so, can you share your thoughts along
with the type of window you used.
Thanks,
Ray
LakeHouse
Milwaukee, WI
___
I have a 1985 C&C 33-2. Every year when i take the boat out of the water,
the cooler drains and is empty. This year it did not do that. Also last
year the water in the head was not draining either. Now the question is
where is the problem. Not sure about the plumbing of the cooler. Any
guidanc
I have a C&C 33 - 1985 that i have reach the point of either replacing
the portlights. I currently have the plexiglass that is screwed in
and they are starting to leak. Ideally I would like to replace them
with one that can be opened for cross-ventalation. Not sure if that
can be done. Does any
ny ideas? Has anyone else experienced this?
>
>
>
> Thanks,
>
>
>
> Brad
>
> 81 C&C 36
>
> Elliott Bay
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Martin
> DeYoung via CnC-List
> *Sent:* Thursday, August 14, 2
Hello:
I have a 1985 C&C 33-2 with a Yanmar, Diesel 2GM20F engine. I was sailing
last night and started the motor like normal to get out of harbor.
However, when I went to come back in to the harbor. I proceed to follow
my normal process. I put the transmission in Neutral and reached down to
t
I have a 1985 C&C 33-2. I just noticed that the sink in the head was
backing up. The sink has not been used at all. What would cause this?
What is the plumbing configuration and are there any diagrams available?
Any help is greatly appreciated.
Thanks,
Ray
LakeHouse
Libertyville IL
Is there is a recognized process to pump out the head to avoid lingering
odors. I have heard people will run a hose at the same time as they are
pumping it out. Anything that can help would be greatly appreciated.
Ray
LakeHouse
Libertyville, IL
___
Thi
Who was the Manufacturer of the 1985 - C&C 33-2 Mast and how would I reach
them?
Ray
LakeHouse
Libertyville
___
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing --
Anyone:
I have 1985 C&C-33-2 and in the front of the mast there is around a one
inch plastic insert that runs the length of the mast. What is this for.
If it is for a T-Track then what is the width of the track that belongs on
the boat? Any information would be great.
Ray
LakeHouse
Libertyville
I have a 1985 C&C 33 and I am looking to store my Forespar Whisker pole on
the mast. I determined that the 1 1/2 T-Track will fit into the slot on
the front of the mast if i remove the plastic insert. (see picture) The
issue i have is finding the fasteners that will hold the T--Track to the
mast
It is time to get my hands dirty. Any recommendations of winterization.
Oil changing pumps, Transmission oil change, etc
Thanks
Ray
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
It is getting to be that time of the year again. I bought my 1985 C&C 33
last year and it was stored inside. This year it is going outside. I am
trying to locate an winter cover or a company that makes covers for the 33
C&C. If anyone can point me in the right direction, it would be greatly
app
I purchased a 1985 C&C - 33 and I am missing the cunningham. Does anyone
have a diagram of where it runs on the boat or could explain it to me.
Thanks,
Ray Macklin
Libertyville, IL
LakeHouse
___
This List is provided by the C&C Photo Album
http://www.c
I am looking to put a mast track on my 1985 C&C 33. It does not currently
have a track. I have purchased a 1" track and that is too small. I just
received an 1 1/4 track that i think is questionable. I just saw online a
1 1/2 track. Do i need to order that one now? Does anyone have the name of
I purchased a Heavy duty Forespare whisker pole. I believe i have a place
for track on the front of the mast. However, the slot has plastic all the
way up the mast. Does anyone have an recommendations on attaching this
pole? Is there a way to put a track on the mast? If so how do you do it
and
I bought a C&C 33 1985 last year and the boat did not come with the
refrigeration equipment. I would like to get it going to avoid another
summer of carrying the cooler around. I have the icebox but nothing else.
Any help on what I should be getting and where to get it from. Thanks
Ray - Liberty
I am looking to replace my port windows on my C&C 1985 33-2. Since there
is no cross ventilation my thought was to replace the plexi glass and
insert a aluminum window within the plexi glass or replace the plexiglass
with an aluminum window. Also, where would i find the replacement
plexi-glass wi
I am looking to purchase new sails for the C&C 1985 33-2. I do a little bit
of cruising and some club racing. I need recommendations on what kinda of
sails get the best results without going broke. Also, I am looking for
recommendations on either a Lazy Jack System or Dutchman. What works
better
I have purchased a 1985 C&C 33. I have been asked it is a MKII. I have
been doing research on each of them, but i have found nothing consistent.
My survey indicates it has a draft of 6'4" like a MKII but also show the
weight at 9800 lbs and the MKII is at 9450 lbs. Don't really know what is
what
40 matches
Mail list logo