Joe, When you burn Freon using propane, you produce Fozgene(sp) gas, which
extremely deadly. Not sure if it the same with alcohol but would imagine it is.
But at least you could see the flames. Lol. Doug Mountjoy Sv Rebecca Leah C
LF39253-208-1412Port Orchard YC wa.
Original message
My Landfall 39 tipped the travel lift scales at 23800, in full live aboard
status. Doug Mountjoy Sv Rebecca Leah C LF39253-208-1412Port Orchard YC wa.
null___
Thanks everyone for supporting this list with your contributions. Each and
every one is
I'm not 100% sure but I think the outboard with an internal fuel tank are
gravity fed. You would most likely need a fuel pump of some sort. With no
battery the could be difficult to rig. As for the other option "spill proof"
gas can. I tend to spill more fuel with them than to old style. I like
Hi Danny,I don't have any experience with the mantus, but got the Excel last
year and love it. Check out this video, this guy has several videos testing
many anchors. https://youtu.be/ZuVcCKzdxtUDoug Mountjoy Sv Rebecca Leah C
LF39253-208-1412Port Orchard YC wa.
Original message
I used a 2 inch sanding disc on my drill for removing the plexus. Doug Mountjoy
Sv Rebecca Leah C LF39253-208-1412Port Orchard YC wa.
null___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated.
I have Red Shield, no problems on claim when I hit a bridge. Don't ask. Doug
Mountjoy Sv Rebecca Leah C LF39253-208-1412Port Orchard YC wa.
Original message From: "Matthew L. Wolford via CnC-List"
Date: 11/10/19 17:10 (GMT-08:00) To:
cnc-list@cnc-list.com Cc: "Matthew L.
Patrick, I used 1/4 on Pegasus. I can give you the whole process that I used
on both Pegasus and Rebecca Leah. Give me a call. Doug Mountjoy Sv Rebecca Leah
C LF39253-208-1412Port Orchard YC wa.
Original message From: Patrick Davin via CnC-List
Date: 11/10/19 07:37
issue So did you hide a inline fuse on the
way to the engine panel, and use that wire for the tach?On Oct 31, 2019, at
2:53 09PM, sv Rebecca Leah via CnC-List wrote:Does
anyone know anything about Yanmar 4JHE tachs? Rewired my engine, now tach fails
to work. Tried new tach no help. Pickup off
and consistent square
wave.Tach is a pulse counter and integrator. It will need power (+12v and GND)
and a pulse. Verify pulse is making it there at the same amplitude as at the
flywheel. Verify power.Josh MuckleyS/V Sea Hawk 1989 C 37+Solomons, MD On
Thu, Oct 31, 2019, 5:53 PM sv Rebecca Leah
Does anyone know anything about Yanmar 4JHE tachs? Rewired my engine, now tach
fails to work. Tried new tach no help. Pickup off flywheel shows an ac voltage
that increases with rpm. Tacoma desiel had me check cleanliness of pickup. No
dirt. At a loss. I need help. Doug Mountjoy Sv Rebecca Leah
Richard, which 39 did you acquire? I have a 39 landfall which is totally
different from the rear cockpit 39's. Doug Mountjoy Sv Rebecca Leah C
LF39253-208-1412Port Orchard YC wa.
null___
Thanks everyone for supporting this list with your
Never could follow directions. Here is my email. Rest of the stuff is below.
svrebeccal...@gmail.com Doug Mountjoy Sv Rebecca Leah C LF39253-208-1412Port
Orchard YC wa.
Original message From: Edd Schillay via CnC-List
Date: 10/3/19 13:52 (GMT-08:00) To: Edd Schillay via
Eds,Just want to say, I'm up north and sail all year. Granted that's the good
ole PNW. DougDoug Mountjoy Sv Rebecca Leah C LF39 1988253-208-1412Port
Orchard YC wa.
Original message From: Edd Schillay via CnC-List
Date: 10/3/19 13:52 (GMT-08:00) To: Edd Schillay via
CnC-List
My vote is aliens. Or the Russian navy. Doug Mountjoy Sv Rebecca Leah C
LF39253-208-1412Port Orchard YC wa.
Original message From: Jim Watts via CnC-List
Date: 9/26/19 20:57 (GMT-08:00) To: 1 CnC List
Cc: Jim Watts Subject: Re:
Stus-List Interesting electrical problem
I have to agree with you Dennis. I have a 2.5k inverter/charger I would love to
get rid of. It's big and I don't like the way it's wired into my boat. I had a
fault while out cruising earlier this month, that rendered the whole unit us
less. Except for ballast. Luckily I was able to reset the
Andy,Your panel install looks great. Doug Mountjoy Sv Rebecca Leah C
LF39253-208-1412Port Orchard YC wa.
Original message From: Andrew Walther via CnC-List
Date: 9/23/19 13:27 (GMT-08:00) To:
cnc-list@cnc-list.com Cc: Andrew Walther Subject:
Re: Stus-List Bimini top with
The "tugging" was most likely there. You didn't notice it far a couple of
reasons.1. With the rudder going back in, the shaft was lubed, and moves freely
now.2. After all the work that was done. You are more critical as to the
steering.3. Under power the prop blades will cause the water to
I'm in the process of replacing my 3 fuel gauges. once new analog gauges are
hooked up, i will pour in fuel 5 gallons at a time. Let fuel settle and take
readings on gauge. This will give me a fairly close proximity of accuracy. I'm
using 1 gauge with a 3 pole rotary switch to select which
Christian,Currently I don't live in the tropics. However I do live aboard in a
very wet climate, known as the Pacific Northwest. I run a dehumidifier during
the winter to keep the mold and mildew at bay. 3 boats and 15 years I have
noticed no ill affects. Doug Mountjoy Sv Rebecca Leah C
Richard,If the Rotella oil has the same rating required by your manual, you
should be covered. Just dont use oil that is for a gas engine. I did this in an
old VWdiesel car. Within 1000 miles i was rebuilding the engine. I use Delo 400
in my yanmar, because I bought 10 gallons for half price.
FWIW. On my LF39 I have 3 stainless 7/16x2 inch 4 ft long chain plates in each
side. These drop down into the hull and are bolted with 1/2in bolts to frame
members. I'm not sure they are original, as the boat was upgraded many years
ago for extended blue water cruising, or maybe racing. I'm not
I replaced mine last summer with a tri color led from marinebeam.com. it has a
photocell to turn on and off. Works great. Doug Mountjoy Sv Rebecca Leah C
LF39253-208-1412Port Orchard YC wa.
Original message From: Len Mitchell via CnC-List
Date: 7/8/19 20:03 (GMT-08:00) To:
I rigged a topping lift to take pressure off my rigid vang when not sailing.
Goes to a cam cleat next to the vang. Doug Mountjoy Sv Rebecca Leah C
LF39253-208-1412Port Orchard YC wa.
Original message From: Shawn Wright via CnC-List
Date: 6/28/19 10:54 (GMT-08:00) To:
What side of the continent do you live on?I might have one that would work.
Luff 44'8".Doug Mountjoy Sv Rebecca Leah C LF39253-208-1412Port Orchard YC wa.
Original message From: Jerome Tauber via CnC-List
Date: 6/6/19 05:05 (GMT-08:00) To:
cnc-list@cnc-list.com Cc: Jerome
Andrew,Kiwi Grip is latex based, it can be tinted like any latex paint. Doug
Mountjoy Sv Rebecca Leah C LF39253-208-1412Port Orchard YC wa.
Original message From: Andrew Means via CnC-List
Date: 6/4/19 11:56 (GMT-08:00) To:
cnc-list@cnc-list.com Cc: Andrew Means Subject:
Alan, How long did it take to get your Max prop refurbished? I need to do mine
and am debating whether to do it know or wait till winter. Doug Mountjoy Sv
Rebecca Leah C LF39253-208-1412Port Orchard YC wa.
Original message From: ALAN BERGEN via CnC-List
Date: 5/27/19 20:32
Looks good. Doug Mountjoy Sv Rebecca Leah C LF39253-208-1412Port Orchard YC
wa.
Original message From: Randy Stafford via CnC-List
Date: 5/27/19 17:12 (GMT-08:00) To: cnc-list
Cc: Randy Stafford
Subject: Re: Stus-List Tree Trimming Listers remember this thread? Well, I
27 matches
Mail list logo
