This may be a repeat – a cockpit visible fuel pressure gauge will give you some
warning and allow you to find 101 different problems that would be about
impossible to solve otherwise, both for A4s and diesels.
My pressure gauge has a red light that comes on below 1 PSI. It uses an
electrical sen
With previous boat we had a stalling issue when slowing or throttling back.
Yanmar would run all day if need be and as soon as approaching a dock or
mooring, would stall. Spent days trying everything. Filter changes, tightening
hose clamps, changing crush washers turned out to be sludge in t
diesel) and
once on a Beta on a boat I was delivering.
Rick Brass
Washington, NC
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd Schillay
via CnC-List
Sent: Friday, June 26, 2020 9:19 PM
To: cnc-list@cnc-list.com
Cc: Edd Schillay
Subject: Re: Stus-List Beta
Air in line
Or fuel pump
On Fri, Jun 26, 2020 at 9:19 PM Edd Schillay via CnC-List <
cnc-list@cnc-list.com> wrote:
> Don,
>
> My guess is dirty fuel as well, but you should also check your fuel lift
> pump and also bleed the system.
>
> Contact Farron at Beta too - he is a great resource.
>
> PS
Don,
My guess is dirty fuel as well, but you should also check your fuel lift pump
and also bleed the system.
Contact Farron at Beta too - he is a great resource.
PS - You were great in Miami Vice.
All the best,
Edd
———-
Edd M. Schillay
Captain of the “Starship Enterprise”
C&
Beta Engine Stalling
Hello
We have a beta engine that has a stalling problem. It started a while ago when
idling. After some investigation and replacing fuel filters to no avail we
found a loose clamp on the fuel line which was letting air in. Problem fixed.
Sort off. It ran well for a while
Hello
We have a beta engine that has a stalling problem. It started a while ago when
idling. After some investigation and replacing fuel filters to no avail we
found a loose clamp on the fuel line which was letting air in. Problem fixed.
Sort off. It ran well for a while, but then... and t
