, February 05, 2015 2:56 PM
Subject: Re: Stus-List CC24
You can always use an extra line to narrow the sheeting angle (the name
escapes me at the moment).
Leslie
was Navigo 2 (CC25)
On Wed, 2/4/15, Ed Dooley via CnC-List cnc-list@cnc-list.com wrote
/4/15, Ed Dooley via CnC-List cnc-list@cnc-list.com wrote:
Subject: Re: Stus-List CC24
To: cnc-list@cnc-list.com
Date: Wednesday, February 4, 2015, 1:44 PM
Good
point. I'm a cruiser, but when my friend pulls up next
to me egging me on to race, it would be nice to
haveone more edge
You can always use an extra line to narrow the sheeting angle (the name escapes
me at the moment).
Leslie
was Navigo 2 (CC25)
On Wed, 2/4/15, Ed Dooley via CnC-List cnc-list@cnc-list.com wrote:
Subject: Re: Stus-List CC24
To: cnc-list@cnc-list.com
I had a CC 24 and added genoa tracks inboard. I put and aluminum bar
underneath and epoxied all holes. Worked well. If I were to do it now I would
use setup on my 27V and put short tracks on the coaming. You can also add a
traveler across the seats.
Jerry CC 27mkV JJ.
to cockpit and
added very necessary sail and rig trim adjustments
Mike
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of chris hulett
via CnC-List
Sent: Wednesday, February 04, 2015 3:20 PM
To: cnc-list@cnc-list.com
Subject: Stus-List CC24
I have a CC24 that I recently purchased
I have a CC24 that I recently purchased and it needs a lot of work.I have
striped everything off of the deck and in the process of fixing all the
fiberglass , when I've finished I will start installing all the deck
hardware and lines, it looks like over the years the boat owners have added
extra
: Re: Stus-List CC24
The only suggestion I would have is to consider genoa tracks. The reason is
our CC's are rather 'fat' boats and sheeting the genoa to the toe rail
gives us a wider than optimum sheeting angle for the genoa. When I got my
30-1, I (had been to a couple of seminars and was loaded
(%7B%7D,'cvml','cnc-list@cnc-list.com');
*Subject:* Re: Stus-List CC24
Did you take pictures prior to stripping off the hardware? Some of the
added hardware may be a big improvement on the original as many of the
older CCs came with hayards led to mast base, no boom vang, no backstay
adjuster
...@cnc-list.com] On Behalf Of chris hulett
via CnC-List
Sent: Wednesday, February 04, 2015 4:28 PM
To: Marek Dziedzic; cnc-list@cnc-list.com
Subject: Re: Stus-List CC24
Yes I did take pictures of all rigging , i see what you are saying . Thank you
for your help.
I will look at the pictures from
down inside...
Gary
- Original Message -
From: Ed Dooley via CnC-List
To: cnc-list@cnc-list.com
Sent: Wednesday, February 04, 2015 3:54 PM
Subject: Re: Stus-List CC24
My shins agree with the last comment. I have a CC24, but don't know what
might be different from the original
Dooley via CnC-List
To: cnc-list@cnc-list.com
Sent: Wednesday, February 04, 2015 3:54 PM
Subject: Re: Stus-List CC24
My shins agree with the last comment. I have a CC24, but don't know what
might be different from the original.
Halyards to winches on the cabin top at the cockpit, no genoa
lines to cockpit and
added very necessary sail and rig trim adjustments
Mike
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of chris hulett
via CnC-List
Sent: Wednesday, February 04, 2015 3:20 PM
To: cnc-list@cnc-list.com
Subject: Stus-List CC24
I have a CC24 that I
@cnc-list.com
Subject: Re: Stus-List CC24
Original is often not the best. I don't think the 24 ever came with a
standard traveller, the main sheet came to a fixed eye in the cockpit floor.
On my old 24 which was a late model there were many modifications to enable
better and more effective sail
Sent: Wed, 04 Feb 2015 12:20:25 -0700 (MST)
Subject: Stus-List CC24
I have a CC24 that I recently purchased and it needs a lot of work.I have
striped everything off of the deck and in the process of fixing all the
fiberglass , when I've finished I will start installing all the deck
hardware
My mirage 25 had a split sheet arrangement like the one shown in the photo.
Good arrangement allowing infinite arrangement of the main once you get used to
it.___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including
Look at the Mirage 24. It's essentially the same boat.
-Original Message-
From: Marek Dziedzic via CnC-List cnc-list@cnc-list.com
Sent: 2015-02-04 7:21 PM
To: cnc-list@cnc-list.com cnc-list@cnc-list.com
Subject: Re: Stus-List CC24
Actually, it seems that there were multiple versions
16 matches
Mail list logo
