when I got my boat I had the plates that the pin went through replaced
as the hole elongated. The pin was fine. the pin is SS and the plates
were bronze.
I think the hardest part is getting the boat somewhere that you can
exercise the board and get a look at things. our yard has a pit but
Not as much of a job as it is if the pin fails and the centerboard is hanging
under the boat by the cable!
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bunky via
CnC-List
Sent: Tuesday, May 30, 2017 3:46 PM
To: cnc-list@cnc-list.com
Cc: Bunky
Subject: Stus-List
Bunny
When I removed my centre board the pin was bent. It is made of 1" stainless
steal. Couldn't tell just looking at the keel.
Mike
PERSUASION
C&C 37 K/CB
Long Sault
> On May 30, 2017, at 3:46 PM, Bunky via CnC-List wrote:
>
> Just had the bottom of Luna, C&C35 painted professionally, and
Just had the bottom of Luna, C&C35 painted professionally, and the technician
wondered if I ever checked the centerboard pin. Do these fail? Need to be
checked? What a job that would be.___
This list is supported by the generous donations of our member
