> Sent: Monday, September 16, 2019 11:38 AM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List New Rudder Steering Tugging
>
>
>
> A lot of C (including my 42 and my prior 34) have the shaft offset
> just a bit to cause what you’re describing. P
CNC boat owners, cnc-list<mailto:cnc-list@cnc-list.com>
Cc: Dan<mailto:dgcorm...@gmail.com>
Subject: Stus-List New Rudder Steering Tugging
Hi all,
So I recently rebuilt my rudder and re-installed it on Breakaweigh.
We took the boat out yesterday and I noticed when under diesel power tha
11:38 AM
> *To:* cnc-list@cnc-list.com
> *Subject:* Re: Stus-List New Rudder Steering Tugging
>
>
>
> A lot of C (including my 42 and my prior 34) have the shaft offset just
> a bit to cause what you’re describing. Perhaps Rob can explain why they
> did that.
>
>
>
&g
My boat does this. Airplanes do it too – this is just how single engine prop
vehicles work unless the shaft is offset.
Joe
Coquina
___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If
: Re: Stus-List New Rudder Steering Tugging
A lot of C (including my 42 and my prior 34) have the shaft offset just a
bit to cause what you’re describing. Perhaps Rob can explain why they did that.
From: Dan via CnC-List<mailto:cnc-list@cnc-list.com>
Sent: Monday, September 16, 2019 11
Yes, my 35 does this also, and with the larger prop and longer prop shat
placing it closer to the rudder, it is quite pronounced. I use the friction
knob on the pedestal to add some friction so I don't have to always hold
the wheel so tight. It definitely increases with speed, so that my wimpy
Thanks everyone - this definitely settles the issue for me.
I had a feeling the pull was there before so I'm not totally alarmed by the
effect, and I will certainly try the immediate throttle-down to test the
concept. I imagine it will behave as expected - not sure why I didn't think
of that
can explain why they did
> that.
>
> From: Dan via CnC-List
> Sent: Monday, September 16, 2019 11:20 AM
> To: CNC boat owners, cnc-list
> Cc: Dan
> Subject: Stus-List New Rudder Steering Tugging
>
> Hi all,
> So I recently rebuilt my rudder and re-installed it on
-list" Cc: Dan Subject:
Stus-List New Rudder Steering Tugging Hi all,So I recently rebuilt my rudder
and re-installed it on Breakaweigh. We took the boat out yesterday and I
noticed when under diesel power that the wheel is lightly tugging to the port
side. I'm not entirely sure i