I had already done all of my standing rigging and having the same done to my
mast this year! It looks amazing! I had to replace my lower spreaders though
as, one of them had a crack. 36 year old aluminum, I figured it was best to
replace rather than repair. I may do the upper spreaders next year. I Already
went with hella spreader lights, they have a red or white light option, and the
Lunasea tricolor/strobe/anchor for top of the mast. The final light,
masthead/deck, Its looking like I'll go with the Marine beam! Thanks Josh! Danny
---------- Original Message ----------
From: Josh Muckley via CnC-List <cnc-list@cnc-list.com>
To: Undisclosed-recipients:;
Cc: Stus-List <cnc-list@cnc-list.com>, Josh Muckley <muckl...@gmail.com>
Subject: Stus-List Re: Recommended Masthead/Deck Light combo replacement [now
mast rebuild]
Date: Thu, 18 Mar 2021 10:45:46 -0400
The yard used awlgrip 2000, pearl gray if I recall correctly. Stripped all
hardware and wiring, welded shut vestigial holes, ground them flat and then
primed and painted. Re-wired, refitted, replaced all rod rigging. Here is the
link to the whole
project.https://drive.google.com/folderview?id=1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm
I pretty sure the next question is going to be "how much?" ~1k for each rod
and hardware. I have 4 shrouds on each side plus head and back. 10 total ~3k
for the paint job alone All said and done it came to roughly 20k Josh Muckley
S/V Sea Hawk 1989 C&C 37+Solomons, MD
On Thu, Mar 18, 2021, 10:19 David Swensen <ka123dswense...@gmail.com>
wrote:Josh, Lets talk about your mast and spreaders. What did you use to paint
them? They look great.
On Thu, Mar 18, 2021 at 9:54 AM Josh Muckley via CnC-List
<cnc-list@cnc-list.com> wrote:I replaced my Aqua Signal with the marine beam.
Perfect replacement fit. No problem. Highly recommend. I also did Aqua
Signal LEDs on the spreaders. Very low profile and they work phenomenally -
almost too bright!
https://store.marinebeam.com/led-masthead-foredeck-combination-light/
https://drive.google.com/file/d/1CdFzOH89I3fwlZeumTcWlLxQGST9Mn_S/view?usp=drivesdk
https://drive.google.com/file/d/1gIzwa9aDe-08QwoXbRkiSKvJpeaHpOkU/view?usp=drivesdk
https://drive.google.com/file/d/1ZQiyoFpaXQ5qMJ82CfCZY1GUoUKmx-MM/view?usp=drivesdk
https://drive.google.com/file/d/1C9XMVAymHLr3240v5wFePlXiVGKJG6VS/view?usp=drivesdk
All the best, Josh Muckley S/V Sea Hawk 1989 C&C 37+Solomons, MD
On Thu, Mar 18, 2021, 08:55 Danny Haughey via CnC-List <cnc-list@cnc-list.com>
wrote:Hello all, I need to replace my masthead (steaming)/Deck Light. The
existing Aqua Signal light doesn't impress me as the deck light lens fell off
at some point and the deck light didn't work. So, Staying away from Aqua
Signal. I've been looking and these light range in price from around $100 all
the way up to well over $500. I've seem Marine Beam, with good reviews, at
about $125 and the Signal Mate, with good reviews at about $450. I don't want
to spend unnecessarily but, I'm leaning toward the Signal Mate. It was good
reputation, been around a while and is supposed to be well made. Of course the
reviews on the Marine beam say they are well made. There are plenty of bad
reviews about the aqua signal. I was hoping some of you could offer some
experiences and advise. Thanks,DannyThanks to all of the subscribers that
contributed to the list to help with the costs involved. If you want to show
your support to the list - use PayPal to send contribution --
https://www.paypal.me/stumurray Thanks - StuThanks to all of the subscribers
that contributed to the list to help with the costs involved. If you want to
show your support to the list - use PayPal to send contribution --
https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stumurray Thanks - Stu