@cnc-list.com>
> *Sent:* Tuesday, May 16, 2017 9:40 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* Indigo
> *Subject:* Re: Stus-List Replacement hinges 35mkIII
>
> The ones I got from Rex are chrome plated zinc alloy (0808DP0CHR)
>
> Can't recall how the hood side of the hing
cnc-list.com
Cc: Indigo
Subject: Re: Stus-List Replacement hinges 35mkIII
The ones I got from Rex are chrome plated zinc alloy (0808DP0CHR)
Can't recall how the hood side of the hinges are attached, but seem to remember
that they were attached with nut and bolt, but seem to remember that nut jus
The ones I got from Rex are chrome plated zinc alloy (0808DP0CHR)
Can't recall how the hood side of the hinges are attached, but seem to remember
that they were attached with nut and bolt, but seem to remember that nut just
spun when I tried to replace a broken hinge in the past requiring
Yes, I still have one as a backup.
That hinge stock number is actually 0951DP1CHR.
Perko also makes the same hinge in zinc, which is what C used in the
first place, at least on my boat. Part number for that is 0808DP0CHR.
The zinc ones are way cheaper than the bronze ones, but will definitely
Thanks for this. I contacted Perko and they were able to give me the exact
dimensions / hole placements etc and gave me a part number (0851DP1CHR). Found
it a local, well stocked marine store shout out to Rex Marine in Norwalk CT! -
NOT West! and confirmed by comparing old to New that is the
I did. Sea Dog makes 2 sizes that are off by about an 1/8 of an inch. It
was the smaller ones. I think one was 2 1/8 overall and one was 2 1/4, but
that was a few years back.
(so that is what that compartment is for!)
Joel
Former 35/3
On Mon, May 15, 2017 at 8:57 AM, Indigo via CnC-List
http://www.perko.com/catalog/category_products/cabinet_hardware-hinges/
On Mon, May 15, 2017 at 7:57 AM, Indigo via CnC-List
wrote:
> Has anyone with a 35mkIII replaced the three hinges that are attached to
> the plexiglass cover for the winch handle (?) tray that is just
Has anyone with a 35mkIII replaced the three hinges that are attached to the
plexiglass cover for the winch handle (?) tray that is just forward of the main
hatch. I have the hinges off the boat, and though they are stamped Perko Zinc
there is no serial / model number. What I thought were