There's a Simrad WP30 drive unit on eBay for $400 right now for anybody
that needs a spare. No mounting hardware.
https://www.ebay.com/itm/Simrad-wp-30-Wheel-Drive/183900752196?hash=item2ad156c944:g:J68AAOSwLM9dPCKq
These don't come up often. I have a spare for Touche'.
Dennis C.
Touche'
Gerry et al.
~$90 with shipping is too much to justify for my needs. Thanks. Back on the
market.
On Tue, Aug 23, 2016 at 8:37 AM Gerry via CnC-List
wrote:
> Kevin Driscoll was first in line.
> If he is not going to purchase it I will let you know.
>
>
> On 08/22/16,
Kevin Driscoll was first in line.If he is not going to purchase it I will let you know. On 08/22/16, Dennis C. via CnC-List wrote: Gerry,Is the WP30 still available. I would still like it.Dennis C.On Tue, Aug 16, 2016 at 1:13 PM, Gerry via CnC-List
Hi Andrew,
I had this problem in an Wagner *50 autopilot
many years ago. It was corrosion on the main
driver circuit board at one of the large transistors.
My recommendation is to take apart and clean as
much as possible your control head circuitry,
using Fred approved cleaning methodology
The first thing I would check is to make sure that the compass is
operational and there is no metal close to it
Ahmet
Tabasco, C 25
Waterdancer, Irwin 43 CC
Winthrop, MA
On Wed, May 25, 2016 at 11:11 PM, Dennis C. via CnC-List <
cnc-list@cnc-list.com> wrote:
> Andrew,
>
> One other thing to try.
Andrew,
One other thing to try. Have you tried using the port/starboard buttons to
operate it manually? Perhaps hold the wheel and see if the belt is
slipping when you press the buttons.
Also, a couple of the guide wheels could be worn or loose but I don't see
that causing a problem in one
I have a WP30 but have never seen that issue. Mine has worked well for 15
years. Wish they still made them.
Like Rick said, it may be a slipping belt. You can find replacement belts
by Googling but some of the candidates work poorly. The *ONLY *one that
really works well is a
Gates
-list.com] On Behalf Of Andrew Means
via CnC-List
Sent: Wednesday, May 25, 2016 8:58 PM
To: cnc-list@cnc-list.com
Cc: Andrew Means <andrew.cnc...@gmail.com>
Subject: Stus-List Simrad WP30 just turns to starboard
Hey all -
I’ve got a Simrad WP30 that only seems to like steering to starboard.
: Andrew Means <andrew.cnc...@gmail.com>
Subject: Stus-List Simrad WP30 just turns to starboard
Hey all -
I’ve got a Simrad WP30 that only seems to like steering to starboard. After
following the instructions in
<https://www.simrad-yachting.com/Root/Operator%20Manual/SimradYachtin
The first thing I check when an autopilot goes wonky is the rudder angle
indicator. It will often come unhooked from its tiller above the quadrant.
Andy
C 40
Peregrine
Andrew Burton
61 W Narragansett
Newport, RI
USA02840
http://sites.google.com/site/andrewburtonyachtservices/
+401
Hey all -
I’ve got a Simrad WP30 that only seems to like steering to starboard. After
following the instructions in the manual for holding a course it does nothing
except make many small adjustments to starboard, at which point the boat just
goes in circles. The PO said he thought it had
Fyi re recent thread on WP30 belt sticking. Since the thread My WP30 belt
sticking got worse. It became dangerous when the wheel wouldn't turn without me
squirting water from the cockpit shower into the thing to lube it.
I had recently flushed and maintained it so dirt and debris were not the
12 matches
Mail list logo