Stus-List Tool recommendation

As the saying goes A little dab will do ya. Rich, your cockpit cover has torn at the back end of your boom ..the pretty, purple piece of form you put on top of the boom end to prevent this didn't work against the forces of nature. Hopefully, we are over the worst of winter's weather. If

Re: Stus-List Tool recommendation

Subject: Re: Stus-List Tool recommendation Message-ID: 55010444.5040...@eastlink.ca Content-Type: text/plain; charset=us-ascii; Format=flowed David: I will be brave to face  a genetic engineer.I suspect the 50-50 acetone ATF concoction has more to do with the 'acetone' than the 'ATF

Re: Stus-List Tool recommendation

in Nanaimo: http://www.4gt.ca/kano-laboratories/ or in Ontario: http://www.aircraftspruce.ca/catalog/eppages/aerokroil.php?clickkey=2037461 Peter Fell Sidney, BC Cygnet CC 27 MkIII From: Marek Dziedzic via CnC-List Sent: Monday, March 09, 2015 11:43 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List

Re: Stus-List Tool recommendation

it with the wrench on it. You will ruin the temper on your wrench. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Michael Brown via CnC-List Sent: Thursday, March 12, 2015 10:42 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Tool recommendation I have no idea from a real

Re: Stus-List Tool recommendation

) Date: Wed, 11 Mar 2015 22:41:58 -0400 To: cnc-list@cnc-list.com Subject: Re: Stus-List Tool recommendation From: cnc-list@cnc-list.com I never cease to be amazed by the information I get from this list. This group has an amazing array or talents and experiences, not just in sailing but also

Re: Stus-List Tool recommendation

: Wed, 11 Mar 2015 22:41:58 -0400 To: cnc-list@cnc-list.com Subject: Re: Stus-List Tool recommendation From: cnc-list@cnc-list.com I never cease to be amazed by the information I get from this list. This group has an amazing array or talents and experiences, not just in sailing but also

Re: Stus-List Tool recommendation

I never cease to be amazed by the information I get from this list. This group has an amazing array or talents and experiences, not just in sailing but also in engineering, metallurgy, mechanics, chemistry etc. etc. The only engineering I can provide advice on is genetic engineering and I

Re: Stus-List Tool recommendation

h... Genetic engineering The possibilities...the possibilities... David F. Risch (401) 419-4650 (cell) Date: Wed, 11 Mar 2015 22:41:58 -0400 To: cnc-list@cnc-list.com Subject: Re: Stus-List Tool recommendation From: cnc-list@cnc-list.com I never cease to be amazed

Re: Stus-List Tool recommendation

David: I will be brave to face a genetic engineer.I suspect the 50-50 acetone ATF concoction has more to do with the 'acetone' than the 'ATF'. I said earlier last week that I thought it was Power Steering Fluid ...both are petroleum based..its the acetonemaybe the petroleum

Stus-List Tool recommendation

I was at the boat yesterday and tried to take the heat exchanger off the engine (Universal M4-30) so I could refurbish the seals and make sure it is clean (http://www.pbase.com/mainecruising/heat_exchanger). One bolt came off easily but the one on the starboard side is a challenge. I cannot

Re: Stus-List Tool recommendation

to use. Steve Thomas CC27 MKIII - Original Message - From: David Knecht via CnC-List To: CnC CnC discussion list Sent: Monday, March 09, 2015 10:12 Subject: Stus-List Tool recommendation I was at the boat yesterday and tried to take the heat exchanger off the engine

Re: Stus-List Tool recommendation

David, Not sure if they will do the job for you but I find the GearWrench 85035 35 piece MicroDriver Set very useful when working on boats. I also find the GearWrench ratcheting wrenches useful. They ratchet with as little as 5 degrees swing. Very nice when working in tight spaces. Dennis C.

Re: Stus-List Tool recommendation

I find these to be useful when I can't get a socket in a tight space. http://www.homedepot.com/p/Husky-SAE-Reversible-Ratchet-Wrench-Set-5-Piece-HRRW5PCSAE/202934583 On Mon, Mar 9, 2015 at 8:43 AM Dennis C. via CnC-List cnc-list@cnc-list.com wrote: David, Not sure if they will do the job for

Re: Stus-List Tool recommendation

Message - *From:* David Knecht via CnC-List cnc-list@cnc-list.com *To:* CnC CnC discussion list CnC-List@cnc-list.com *Sent:* Monday, March 09, 2015 10:12 *Subject:* Stus-List Tool recommendation I was at the boat yesterday and tried to take the heat exchanger off the engine (Universal M4-30

Stus-List Tool recommendation

Hi David, If it hasn't been mentioned for max torque with less chance of stripping make sure you go with a 12 point closed wrench instead of 6. Ratcheting closed wrenches are a pleasure to work with but for high torque the ratchet can possibly get damaged.. I'd go with a plain ol' forged one

Re: Stus-List Tool recommendation

Yes, as a matter of fact the Alden wrenches are sized like normal wrenches. The ones that we made with the grad students were fixed jaw. The pivoting clamp lower jaw is an improvement to the concept. I don't have any in my tool box. Neil Schiller 1970 Redwing 35, Hull #7 (CC 35, Mark I)

Re: Stus-List Tool recommendation

product in this one particular test. Note also that Liquid Wrench is about as good as Kroil for about 20% of the price. Marek From: robert via CnC-List Sent: Monday, March 09, 2015 12:20 PM To: Steve Thomas ; cnc-list@cnc-list.com Subject: Re: Stus-List Tool recommendation Steve: Advice

Re: Stus-List Tool recommendation

*Subject:* Stus-List Tool recommendation I was at the boat yesterday and tried to take the heat exchanger off the engine (Universal M4-30) so I could refurbish the seals and make sure it is clean (http://www.pbase.com/mainecruising/heat_exchanger). One

Re: Stus-List Tool recommendation (Kevin Driscoll)

If you are up for a detour from Bangor over to the coast, you could go to West Marine in Southwest Harbor (on Mount Desert Island). Damian Greene CC 34 GHOSTTremont, Mount Desert Island, Maine  From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt, Mike via CnC-List Sent: