Re: Stus-List CnC-List Digest, Vol 121, Issue 64

Just bought a bunch of this stuff. Are you bonding directly to acrylic? Aluminum? What adhesive will you use? I tried a few and ultimately used super glue. Alex W Shaka C & C 24 > > > > -- Original message--From: Dreuge via CnC-List Date: Fri, Feb 19, > 2016 08:29To: CnClist;Cc:

Stus-List Octopus linear drive

All - I need to replace my autopilot ram and am considering the Octopus 1212LAR12. Anyone have installation or use experience with the brand? At a recent boat show the only input I had was from competitors that stated the units are loud. Also, I made a quick search in my saved emails

Re: Stus-List Octopus linear drive

Back in the day I bought Octopus drives when installing Autohelm/Raytheon autopilots. Back then at least we thought of them as better and cheaper. Joe Della Barba j...@dellabarba.com Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf

Re: Stus-List Octopus linear drive

Pete, The PO of the Enterprise put in an Octopus drive as part of a Robertson Autopilot system. The Octopus was alway quiet and ran perfectly (and I assume it still does - the Robertson "brain" started having problems). A few months ago, through lister Fred Street, I purchased a Raymarine EV2

Re: Stus-List Replacement Depth Transducer

Bob -- if you're interested, I can price that transducer for you from my vendor. -- Fred > On Feb 19, 2016, at 8:21 PM, bobmor99 . via CnC-List > wrote: > > Thank you Fred, > It's disappointing that a simple depth = x? question would be complicated by > vendors'

Stus-List New sail for the roller furler?

I'm shopping for a new head sail %135 with foam. I also need a furler. Being a Manager / Harbor Master, any idea or wisdom on what to buy? I need a good deal. Thanks -- Capt, Curtis McDaniel Dataw Island Marina Harbor Master 470-313-0918 ___

Re: Stus-List New sail for the roller furler?

Hey Capt', Do have any non-conforming liveaboards or moored boats with a lapse in insurance requirements? Those owners good be your best source of a good deal, if ya know what I mean. Cheers, Russ Sweet 35 mk-1 Vancouver Island "No sir, I don't live here. I'm

Re: Stus-List New sail for the roller furler?

Curtis, I just a sail in Victoria, BC at 70 cents on the dollar. Fred Hazzard S/V Fury C 44 Portland Oregon On Feb 20, 2016 1:31 PM, "Russ & Melody via CnC-List" wrote: > > Hey Capt', > > Do have any non-conforming liveaboards or moored boats with a lapse in > insurance

Re: Stus-List New sail for the roller furler?

Company name?  Number? Sent via the Samsung Galaxy S® 6, an AT 4G LTE smartphone Original message From: Fred Hazzard via CnC-List Date: 2/20/2016 4:52 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Fred Hazzard Subject: Re:

Re: Stus-List New sail for the roller furler?

Leitch & McBride. 250 656 0751 On Feb 20, 2016 3:04 PM, "Captain, Curtis McDaniel via CnC-List" < cnc-list@cnc-list.com> wrote: > Company name? Number? > > > > Sent via the Samsung Galaxy S® 6, an AT 4G LTE smartphone > Original message > From: Fred Hazzard via CnC-List

Re: Stus-List New sail for the roller furler?

Very good loft. Jim Watts Paradigm Shift C 35 Mk III Victoria, BC On 20 February 2016 at 15:59, Fred Hazzard via CnC-List < cnc-list@cnc-list.com> wrote: > Leitch & McBride. 250 656 0751 > > ___ Email address: CnC-List@cnc-list.com To change your

Re: Stus-List New sail for the roller furler?

Yup. Sails are made locally or in a US-based loft ... not offshore. Furlex dealer too if I’m not mistaken. From: Jim Watts via CnC-List Sent: Saturday, February 20, 2016 4:27 PM To: 1 CnC List Cc: Jim Watts Subject: Re: Stus-List New sail for the roller furler? Very good loft. Jim Watts

Re: Stus-List Thin plastic sheet for headliner access and other uses

Rick: We're both doping the same project this year.I'm in Florida for the next couple of months and in Sarasota there is a place called Marine Surplus. They have rolls and rolls of fabric and coverings in clued inner hull fabrics.they have a very good choice for our replacement

Re: Stus-List Replacement Depth Transducer

Thank you, Fred. I'm still figuring out a few things. I was recently gifted an old Standard Horizon 155 CP155C (without the GPS) from a dock neighbor who upgraded to a SH CPN 700i. I couldn't get a GPS signal into the CP155C and am about to relegate it to emergency backup status. The charts

Stus-List 34+

Folks, I'm starting that long journey to a bigger boat. I'm looking for a 34+ with a 5 ft draft. My budget most likely will not allow for a long delivery. So I'm looking at boats located in the Chesapeake to Maine, on the East Coast. I'd also consider a CS 34 or 36 with the transom step.

Re: Stus-List Replacement Depth Transducer

Does the 155 require an external antenna? Joel On Saturday, February 20, 2016, bobmor99 . via CnC-List < cnc-list@cnc-list.com> wrote: > Thank you, Fred. > > I'm still figuring out a few things. I was recently gifted an old Standard > Horizon 155 CP155C (without the GPS) from a dock neighbor who

Re: Stus-List New sail for the roller furler?

So maybe if I buy sail and furler from same shop I may cam get a deal I need the name of the shop. Thanx On Feb 20, 2016 8:43 PM, "Peter Fell via CnC-List" wrote: > Yup. > > Sails are made locally or in a US-based loft ... not offshore. > > Furlex dealer too if I’m not

Re: Stus-List New sail for the roller furler?

I race with the owner of the Sidney loft. Drop me an email and I'll see if I can get you a good deal. Cheers, Paul. Date: Sat, 20 Feb 2016 15:59:32 -0800 To: cnc-list@cnc-list.com Subject: Re: Stus-List New sail for the roller furler? From: cnc-list@cnc-list.com CC: fshazz...@gmail.com Leitch

Re: Stus-List New sail for the roller furler?

Hi Curtis, the name of the loft was in Fred's message. here they are: http://www.leitchandmcbride.com/ Cheers, Russ Sweet 35 mk-1 Vancouver Island At 07:34 PM 20/02/2016, you wrote: So maybe if I buy sail and furler from same shop I may cam get a deal I need the

Stus-List 34+

Another boat that you might want to consider is the C 110. The shoal draft version draws 4'-10". It's a little bit longer, wider and faster than the 34+. If you're looking for a project, there's one listed on Yachtworld for $30,000 on the east coast. Here's the link.