300 sq. ft of headsail at 20 knots true is about 520 pounds load.
https://www.harken.com/content.aspx?id=9096
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Fri, Nov 9, 2018 at 7:08 PM bwhitmore via CnC-List
wrote:
> 4000 lbs of load on a 30 ft. C? On what do you base this?
>
> Sorry if I seem
4000 lbs of load on a 30 ft. C? On what do you base this?Sorry if I seem
incredulous...Sent from my Verizon, Samsung Galaxy smartphone
Original message From: Michael Brown via CnC-List
Date: 11/9/18 5:54 PM (GMT-05:00) To:
cnc-list@cnc-list.com Cc: Michael Brown Subject:
That didn’t sound right to me, either.
From: bwhitmore via CnC-List
Sent: Friday, November 09, 2018 8:07 PM
To: cnc-list@cnc-list.com
Cc: bwhitmore
Subject: Re: Stus-List Shackle for Genoa Sheets?
4000 lbs of load on a 30 ft. C? On what do you base this?
Sorry if I seem incredulous...
I am using the Tylaska #8 J-Locks with a core dependent eye splice.
The sheets gets loaded over 4000 pounds but I have not had an issue.
The lock will open under load and we have done sail changes in
high winds without having to tack or de-power.
They may have more appeal for racing where a
Open under load...what hapens to the clew. We do lots of headsail changes
on yhe go the old way i guess never released the clew under load. Can’t
imagine how that wotks out good still learning i guess
On Fri, Nov 9, 2018 at 6:50 PM Michael Brown via CnC-List <
cnc-list@cnc-list.com> wrote:
> I
Just one of the many reasons i chose an “older” C 35 MKII no baby stay
tree trunk mast keel stepped single spreaders double lowers fore and aft
easy to tune and keep tuned. Very well built boat heavy and strong non
cored hull and thick too. Besides I love the classic Cutherbertson design
shear
All- I’m in need of an inside corner teak molding. The existing piece has an
extended lip as shown in the picture. Does anyone know where to find a
replacement?
I found pieces without the lip, but I’m hoping for better.
Thx
Google "custom marine teak". Several shops pop up.
Dennis C.
On Fri, Nov 9, 2018 at 9:29 AM pete.shelquist--- via CnC-List <
cnc-list@cnc-list.com> wrote:
> All- I’m in need of an inside corner teak molding. The existing piece has
> an extended lip as shown in the picture. Does anyone know
While we’re at it, I’m still looking for a piece of corner molding oriented in
the other direction. Pete’s photo shows the typical orientation (albeit with
an atypical lip). I need a piece to cap the corner of a rounded salon bunk
bulkhead, which I have been unable to find. Anyone know of a
If Bruce Pope or Paul Clarke are on this list, please contact me regarding your
E-Transfers.
Thanx
Stu
---
This email has been checked for viruses by AVG.
https://www.avg.com
___
Thanks everyone for supporting this list with your contributions. Each
10 matches
Mail list logo