Thanks everyone for the replys.
Fred - If I was going to go with the i40 instruments then I would
just replace the depth sounder - I wouldn't be adding wind
instruments as part of the i40 group.
Don't think I'm going to go refurbished or The big question - do
Hi Liz
I just had my 29.1 hauled and used “On and Off” GEL hull cleaner. It is so
easy to use. Brush it on and wait for the stain to disappear then rinse it
off. Works like a charm. My white hull has no stains now and having just
waxed it should stay that way. I highly recommend “On and Off” but
Fair enough. I do buy refurbished gear sometimes as well. I was
more thinking I'm not going to try and piece together a new
transducer to the old display.
Raymarine doesn't have any of what I need right now in the referb
section (only a depth display with no
We charge racers a separate fee from the YC dues. That covers equipment
purchases and rental of mark set boats. All labor is volunteer.RonWild
CheriC 30-1STL
On Tuesday, December 18, 2018, 8:48:25 PM CST, Charlie Nelson via CnC-List
wrote:
Hello all CnCers;
I have some questions
I would disagree on one point. I frequently buy refurbished electronics for
boat and home and have not had a problem yet. My logic is that at least the
refurbished item has been specifically tested and shown to work up to spec.
That is more than the standard stuff off the assembly line gets.
Hi Charlie. Your club sounds similar to ours in size and operation.
We charge typical club fees to cover operating expenses etc but have a separate
fee for those who participate in the Wednesday night racing program. The charge
covers equipment, committee boat costs and puts some aside for
We joined this list a few years ago as Breakaweigh 1, have since sold it and
purchased a 35 mk3 , had a question re rust on fibreglass, any tips on removing
it!
Liz McDonald
Rhumb Runner
Belfast Maine
Sent from my iPad
___
Thanks everyone for
Bottom of this page should help you out:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Cheers,
Jeff Nelson
Muir Caileag
C 30
Armdale Y.C.
On 12/19/2018 8:12 AM, Elizabeth McDonald via CnC-List wrote:
We joined this list a few years ago as Breakaweigh 1, have since
Charlie,
My club, City Island Yacht Club, is a club that has land, a clubhouse, and is
heavily sailing oriented, with a large percentage of racing members. As such,
the club has two racing organizations.
The first is the club itself, which runs several races over the season. The
club does
Acid based cleaners. Or you can start with vinegar
Bill Coleman
C 39
On Wednesday, December 19, 2018 Elizabeth McDonald via CnC-List
wrote:
We joined this list a few years ago as Breakaweigh 1, have since sold it and
purchased a 35 mk3 , had a question re rust on fibreglass, any tips on
See responses below.
From: Charlie Nelson via CnC-List
Sent: Tuesday, December 18, 2018 9:47 PM
To: cnc-list@cnc-list.com
Cc: cenel...@aol.com
Subject: Stus-List Sailing Club with racers
Hello all CnCers;
I have some questions for those of you who belong to Sailing or Yacht Clubs,
Thanks to all who responded. Not unexpectedly the solutions are as varied as
the circumstances within the clubs!
However, they did suggest some ideas that we may need to consider, especially
ensuring that a paper club affiliation
with a club with real estate is fair to all concerned.
I'm not a member of the local Sailing club (Southern Maryland Sailing
Association - SMSA) but I reached out to one of the members and here is his
response.
*Yes Randy is similar to SMSA. We have a club associated with SMSA they are
SCC that is for kids. Most (but not all) have parents in SMSA. We
Brian...where are you?
David F. Risch, J. D.
Gulf Stream Associates, LLC
(401) 419-4650
From: CnC-List on behalf of Brian Fry via
CnC-List
Sent: Tuesday, December 18, 2018 2:48 PM
To: cnc-list
Cc: Brian Fry
Subject: Stus-List Winter cover for 37/40
I have
Charlie,
If the OD club members don't want to take advantage of your facilities on a
full time basis, I'd consider a special membership category for them. My
club has a couple of membership categories for young sailors or racers,
etc. Perhaps you could change your bylaws to include a race
That’s a good way to do it. CSYC’s bylaws allow the board to designate types
of auxiliary members as opposed to full members. Auxiliary members don’t have
voting rights. For example CSYC has crew memberships.
Cheers,
Randy
> On Dec 19, 2018, at 9:29 AM, Dennis C. via CnC-List
> wrote:
>
FSR, Barkeeper's Friend, Wood Bleach; anything with oxalic acid in it.
Jim Watts
Paradigm Shift
C 35 Mk III
Victoria, BC
On Wed, 19 Dec 2018 at 04:12, Elizabeth McDonald via CnC-List <
cnc-list@cnc-list.com> wrote:
> We joined this list a few years ago as Breakaweigh 1, have since sold it
>
17 matches
Mail list logo
