Stus-List Lake Pontchatrain

Dennis C., I know this is off CC subject, but am considering moving Beemer down your way. Would appreciate all the good info you can give me on the clubs and marinas on the north side. You can email me @ rcaugh...@att.net Bob C. Beemer, 29mkII Jackson,

Re: Stus-List 29-2 information

I have hull # 309 and it was completed in the summer of ‘83. Bob Caughran Beemer CC 29 Mk II, #309 From: Ron Ander via CnC-List Sent: Monday, March 16, 2015 8:31 AM To: 'Rick Brass' ; cnc-list@cnc-list.com Subject: Stus-List 29-2 information My CC 29 Mk 2 (Hull # 507) was built in

Re: Stus-List 29-2 genoa sheets

The 29 Mk ll owners manual lists 7/16 X 35'. Bob Caughran 29MKII, Beemer, 309 Sent from my iPad > On Apr 10, 2016, at 11:35 AM, John Pennie via CnC-List > wrote: > > I would assume 45' and whatever diameter your hands and your winches are > comfortable with. > >

Re: Stus-List C 29 Mark II

Hi Eugene, Welcome to the group. I have an 83 Mk II. Been out in 30-35 knots and 5-6' seas. She's no 40 footer, but she actually handles it pretty well. You might get a bit wet though without a dodger. As for the spreaders, mine has a bracket that wraps the mast with studs that the spreaders

Re: Stus-List stuffing box

Bev, So fun going by memory. When I splashed Beemer in December, I had a wonderful stream of water from my stuffing box. Unscrewed and added one loop of packing. All dry after. 90% certain it was 3/8 thick. As Russ mentioned, other than a stream of water (not bad), easy to do while boat is in

Re: Stus-List Through hole location for bilge outputs

Hi Gene On Beemer my electric bilge with float switch uses one inch hose that is routed directly aft then up and exits just aft of the starboard bulkhead in cockpit locker two inches below the rub rail. Bob Caughran Beemer, 29MKII, 309 Sent from my iPhone > On May 12, 2016, at 12:14 PM,

Re: Stus-List Head Plumbing

On Beemer I have a thru hull and seacock under the sink that feeds the head. Was fine in lakes but now with seawater it's less than my liking. Always had to have seacock closed as would overflow the head on a port tack. I plan to plumb from onboard water supply this spring. They have a kit if I

Re: Stus-List Stay Shroud Tension

Chris, I do not use a Loos gage on Beemer, 29mkll, to tune my rig. My process is as follows. With all stays and shrouds lose, I tension the stays so I have approximately 9 inches rake along the boom using a weight on the main halyard. Forestay first, then backstay to remove slop. I them tension

Re: Stus-List Circuit Breaker Panels for 1981 C 36

I recently replaced the 30A main breaker on my 29mkII. Pulled it ran down to west marine, compared it to what they had. Found one that was basically the same except different screw size for wire terminal lugs. Changed lugs on the wires and installed. Took far longer to drive to west marine than

Stus-List Prepping For First Cruise

First let me apologize. I do get carried away writing at times. Until Beemer, 29mkII, was moved down to Biloxi 14 months ago, she had been a lake boat for ten years, day sailing and spending weekends in the marina, racing around the cans. Sailing on a friends 48' Tayana occasionally over the

Re: Stus-List Prepping For First Cruise

e walkway to the shore. > The east end is shallow. > > Most of the info is contained in the document called "Cruising Mobile to > Destin" shared above. > > If you have any questions, email, text or call me. > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA

Re: Stus-List Prepping For First Cruise

rmer (wall > wart). It will be most efficient to simply power them straight off the 12v > battery through something like a cigarette lighter plug. > > Josh Muckley > S/V Sea Hawk > 1989 C 37+ > Solomons, MD > >> On Feb 25, 2017 11:14 AM, "Bob Caughran via CnC-List" >

Re: Stus-List C Spinnaker

Hi John, My 29-2 is rigged for symmetric spinnaker. She has a topping lift, down haul, and halyard all run aft to the cockpit. Sheet blocks all the way aft attaching to the back stay mounting plate (transom corner casting). Snatch blocks mounted mid ship. Sheets run to forward coming

Re: Stus-List Traveler Bolts 33MK2

On my 29-2 there is a teak trim piece which covers the holes and the bottom of the bolts and nuts for the traveler. Bob Caughran 29-2, Beemer, #309 Sent from my iPhone > On Apr 17, 2017, at 10:41 AM, Lee Rosenbaum via CnC-List > wrote: > > I want to remove the

Re: Stus-List Gotta Love These Hurricanes

;cnc-list@cnc-list.com> wrote: >> Good luck, you guys. You have had repeated beatings this year. >> >> Jim Watts >> Paradigm Shift >> C 35 Mk III >> Victoria, BC >> >>> On 7 October 2017 at 19:56, Bob Caughran via CnC-List >>> &

Stus-List Gotta Love These Hurricanes

So here's how my last 3 days have gone. On Thursday a fellow sailor from my marina in Biloxi called to let me know they were considering closing the marina for Nate. I packed up my car and headed down to Biloxi yesterday morning. Sunshine, 82 degrees and 12-15 knots from the east. I arrive to

Re: Stus-List Gotta Love These Hurricanes

yards offer pre-paid storm haul outs. Or I guess one heads to The > Wharf in Orange Beach. That's a 25 mile run. > > Fairly quiet here in Baton Rouge tonight. Nate has made landfall on the > Delta and will shortly make a second landfall on the Mississippi Coast. > > Dennis

Re: Stus-List Gotta Love These Hurricanes

when you know people. Bob Caughran Beemer 29mkll Biloxi Sent from my iPhone > On Oct 8, 2017, at 08:33, Bob Caughran via CnC-List <cnc-list@cnc-list.com> > wrote: > > Golden Nugget in Biloxi had four feet of water in lower level garage which > mean marina docks were 6

Re: Stus-List Gotta Love These Hurricanes

Amen to that!!! Sent from my iPhone > On Oct 8, 2017, at 18:38, Dennis C. via CnC-List > wrote: > > Touche' also escaped unscathed. Dock neighbor emailed me all is well. Was > worried one of the "derelict" liveaboard boats anchored astern of me would > break loose.