My fridge compressor/radiator is in the engine compartment. I ran the intake
vent piping to the radiator to get the cooler air. The exhaust vent pipe runs
to forward lowest area of the engine compartment. I upgraded to 4" to Max the
air movement and tried for a quieter exhaust fan. I run
This is sometimes sold on marine sites as "Charter Boat Repair Tape"!
3M 8979 Duct Tape - 3" x 60 yds, Slate Blue
For quick fixes on charter boats and outdoor jobs.
Strong waterproof backing resists UV, moisture and rain up to 1 year.
Removes cleanly for up to 6 months.
Handles temperatures up to
Is the head hatch on the 70s Viking 33/34 the same? The Nicro 3" cap gives
some sense of scale in the picture:
Viking 34 Head Hatch
Don
V34
NCYC
> On Dec 6, 2015, at 6:17 PM, s/v Johanna Rose via CnC-List
> wrote:
>
> Fred,
>
> All of my hinges have one hole.
> Hi Fred,
>
> That AH looks like the head hatch on my Viking. The V berth hatch is also an
> AH.
>
> Don
> Viking 34
>
>> On Dec 6, 2015, at 9:21 PM, Frederick G Street via CnC-List
>> wrote:
>>
>> http://www.postaudio.net/webserver/lf38hatches.html
>>
Ah folks,
Consider staying with a C:
http://www.kijiji.ca/v-view-details.html?utm_medium=email=1104866129=en_CA_campaign=email_alerts_source=alerts_medium=email_campaign=email_alerts_source=alerts
30 ' PICNIC MOTOR LAUNCH
Watch|Share|Print|Report Ad
Poster Contact Information
View poster's
> Hi Steve,
I moved from Oakville to the North Channel. My thinking was that a long
drive rather then multi day sailing trip had me sailing longer and cheaper
where I wanted to be. I pay 20% of the boat fees that I paid in Oakville.
Boating services were close to $5,000 year. In Spragge at
Don
V34
> From: Mike Dale
> Date: September 16, 2015 at 1:34:50 PM EDT
> To: D Harben
> Subject: Re: LeDrew Stories: Bonaventure V sailing
>
> - Rex Bradley sailed that race too and did the trip back - they filled the
> centre cockpit and used
My apologies ahead of time. I would like to find a home for 2nd boat rather
then store it ...
http://www.kijiji.ca/v-sailboat/sudbury/cnc-29-mark-1-4draft-deliver-low-price-tlc-spring-sail/1101324526?src=topAdSearch
Don
Don Harben
V34
C 29
> Spin halyard
___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Steve... You may be onto something...
This sounds like a STUs-List fund raising project
Don
Life
V34
Could be the next reality show – Flip that boat
Steve Sharkey
CC 37
___
Email address:
CnC-List@cnc-list.com
To change your list
Ah!
Just think of the creation that we might create with deck cows, turbo atomic 4,
pulsing LED strings on the shrouds...
Don
V34
On Aug 21, 2015, at 6:34 PM, Martin DeYoung via CnC-List
cnc-list@cnc-list.com wrote:
His crew of boat modifiers would not be allowed within 2 miles of
...
Viking 33/34?
Row away experience? Oh yes!
Don ___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Hi Fred,
hmmm Will a Raymarine tiller pilot St2000+ also provide heading ... assuming no
other magnetic to list after?
Don
V34
Life
On Aug 12, 2015, at 12:34 PM, Frederick G Street via CnC-List
cnc-list@cnc-list.com wrote:
your autopilot should be sending “fast” (10 Hz) heading info over
I enjoy sailing by what I see wind doing and anticipating the changes coming by
observing water, clouds and shorelines. When I have raced with wind instruments
I have found them useful to backup and verify my thinking but not as a primary
tool. I am wondering about an accurate flu gate compass
I am following closely! I have been giving Signet antiques TLC, while using
an iPad Air in a LifeProof case. The iPad has navionics chart plotting, AIS
over cell etc etc etc. My iPhone 5 carries the identical software and
settings as backup.
The downside is keeping waterproof power is
... Argh yes! I carry a VHF/DSC/GPS and knife on me as I single hand... however
... Getting close to the Raymarine 2000+ causes it to lust after them ...
Don
V34
NCYC
On Aug 11, 2015, at 11:56 AM, Dennis C. via CnC-List cnc-list@cnc-list.com
wrote:
magnetic interference probably caused by
Hi Starship
1 to beam up from Lake Huron
Don
Life
V34
___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Hi Bob
Model # ?___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Hi
Just FYI
No knowledge or relationship
Don
http://www.kijiji.ca/v-boat-parts-trailer-accessories/oshawa-durham-region/universal-atomic-four-refurbished-complete/1049249143?enableSearchNavigationFlag=true
___
Email address:
CnC-List@cnc-list.com
Oh yes..
I used to race foredeck for Mike Dale on an Evelyn 32 out of Oakville Ontario.
The boat came from Annapolis, called EVE. She was renamed EVEofDestruction ...
So
Yes you guessed what the boom box played for the start line ...
Did I mention that Mike was not wearing his hearing aids
+2
I used LifeProof iPad and iPhone cases all last summer full time cruising Lake
Huron.
I have a cradle on a ram mount for the phone. I am now buying a cradle and ram
mount for the iPad
The white colour case stays much cooler in the sun. Big note here!
The Fre has a built in screen
Hi
I used LifeProof iPad and iPhone cases all last summer full time cruising Lake
Huron.
I have a cradle on a ram mount for the phone. I am now buying a cradle and ram
mount for the iPad
The white colour case stays much cooler in the sun.
The Fre has a built in screen protector and works
Jim,
Did you renew/replace the small port side hatch in the photo?
Don
On Jun 2, 2015, at 7:41 PM, Jim Watts via CnC-List cnc-list@cnc-list.com
wrote:
The Lewmar Ocean 60 flat base is a fine fit, although it doesn't cover the
full area that the AH hatch did, so there's a bit of
Data driven evidence suggests that a knockdown can separate the elements of a
rail BBQ. Use of said BBQ does work as a sea anchor bit may drag in mud.
D
On Jun 2, 2015, at 9:58 AM, Russ Melody via CnC-List
cnc-list@cnc-list.com wrote:
What kind of barbeque? I think a Weber with
... or perhaps a trained dolphin?
On Mar 17, 2015, at 6:29 PM, D.J. Platt via CnC-List cnc-list@cnc-list.com
wrote:
or possibly a line with a weight?
From: Frederick G Street via CnC-List
Sent: Sunday, March 15, 2015 1:21 PM
To: John Pennie ; cnc-list@cnc-list.com
Subject: Re:
The wisdom of the far reaches of the corners of our community is not available
anywhere else nor documented elsewhere. I am in my third CC and I am a newbie.
Technology changes and transitions in routines loose participants. I so value
the sage elders of CC boats and sailing that loosing their
List
Don
Life
On Mar 13, 2015, at 6:51 PM, Mike Brannon via CnC-List
cnc-list@cnc-list.com wrote:
List.
Sent from my iPad Mini
On Mar 13, 2015, at 17:32, Stu via CnC-List cnc-list@cnc-list.com wrote:
Recently, some of our subscribers have indicated that they would like to
have
Rum
Then
Scotch
But female assistance may be required for difficult to access .
On Feb 22, 2015, at 9:16 PM, Graham Collins via CnC-List
cnc-list@cnc-list.com wrote:
Has to be something Wal has on hand. Tequila???
Graham Collins
Secret Plans
CC 35-III #11
On 2015-02-22
On my CC29-1 A4 I had a crank handle...
but the standard install restricted the swing to about 1/2 turn ...
so I decided to give the handle away and keep my hands and arms in one piece...
Don
On Feb 3, 2015, at 11:34 AM, Kirkpatrick, Jay via CnC-List
cnc-list@cnc-list.com wrote:
Hi Dave.
I am also interested. Posting these on your website may be of interest to
others.
Don
On Jan 30, 2015, at 12:02 PM, Dave Godwin via CnC-List
cnc-list@cnc-list.com wrote:
Edd,
I have the wiring diagrams that I put together for my re-wiring project a few
years back. Don’t
Hi,
A Raymarine tech mentioned that at the upcoming Miami boat show they will be
releasing redesigns of everything except auto pilots. I am not buying now,
just trivia
Don
On Jan 30, 2015, at 4:50 PM, Rick Brass via CnC-List cnc-list@cnc-list.com
wrote:
I have to agree with
Possible actions ...
Vote at Kingston newspaper site.
Contact Kingston City Council.
Contact and join Marine Museum.
Don
Marine Museum News Update
26 January 2015
Dear Members and Friends,
The January 31 deadline for the City of Kingston to express
Hi Wal,
I am talking to a company in Ontario Canada about a charging solution. I run
an essential CPAP for life threatening APNEA so ... cruising with an assured
charging solution is imperative in order to run while on the hook for a week.
Yes, I have bought a used windmill and I am
-list-boun...@cnc-list.com] On Behalf Of D Harben
via CnC-List
Sent: Monday, January 26, 2015 3:01 PM
To: viking_33_or...@yahoogroups.com; cnc-list
Subject: Stus-List Marine Museum crunch tomorrow!
Possible actions ...
Vote at Kingston newspaper site.
Contact Kingston City Council
perhaps a turbo 7.4L muscle car engine would squeeze in the cabin
replacing the table
On Jan 14, 2015, at 6:32 PM, Burt Stratton via CnC-List
cnc-list@cnc-list.com wrote:
Fear of sinking by over-power is why I won’t put a turbo charger on my A4
From: CnC-List
The official countdown today at 6 pm!
Don
On Dec 21, 2014, at 5:52 PM, Rick Taillieu via CnC-List
cnc-list@cnc-list.com wrote:
Same to you Russ.
Only 145 (ish) days until launch.
I know, somebody had to start the countdown.
Rick Taillieu
Nemesis
'75 CC 25 #371
... Only 1 pair?
Ha!
Progressive trifocals, everyday
Progressive trifocals, sailing
Reading
Computer, longer focal length then reading
Distance for TV and movie theatre
Where they are at time and place is never where I need them!
On Dec 19, 2014, at 10:30 PM, Jim Watts via CnC-List
Hi
http://www.kijiji.ca/v-sailboat/mississauga-peel-region/c-c-30-never-sailed/1039209833?enableSearchNavigationFlag=true
Don
Viking 34
29 mk 1 for sale on trailer
On Dec 14, 2014, at 6:27 PM, Ronald B. Frerker via CnC-List
cnc-list@cnc-list.com wrote:
Was there a previous message
Hi
I am using iOS Anchor! On iPhone and iPad.
It does
- allow moving the anchor location
- alarm perimeter
- alarm means by visual only, sound only, email and phone or any combination
Can wake one from deep sleep but the scary thought would be depending totally
on this!
Don
V34 Life
Hi Jimmy,
I am interested in the issues and solutions on V34. Off the list response is
fine.
Don
V34
On Nov 4, 2014, at 8:25 PM, jimmy kelly via CnC-List cnc-list@cnc-list.com
wrote:
some cc designs such as viking 34s have needed reinforcement when used in
rough waters backstay
Evelynn 32-2
Huge smile fun... Mike Dale and I were sailing from Oakville to Hamilton
Ontario for a regatta with strong winds off the shore. EVE of Destruction had
no working instruments but I did have a handheld Garmin. We were whooshing
along eating our sandwiches, but we were curious to
CC yard built but designed by Robert Evelyn
http://sailboatdata.com/viewrecord.asp?class_ID=1164
On Oct 31, 2014, at 11:59 AM, D Harben via CnC-List cnc-list@cnc-list.com
wrote:
Evelynn 32-2
Huge smile fun... Mike Dale and I were sailing from Oakville to Hamilton
Ontario
Hi
Would you mind sharing on a photo cloud?
Don
On Oct 13, 2014, at 1:16 PM, Bruno Lachance via CnC-List
cnc-list@cnc-list.com wrote:
Jake,
If you send the pictures to Doug, please add me to the list.
Thanks
Bruno
33mkii
Becassine
Envoyé de mon iPad
Le 2014-10-13 à
... but clouds got in my way
On Oct 13, 2014, at 3:10 PM, Stu via CnC-List cnc-list@cnc-list.com wrote:
Before you send everyone your pictures, consider uploading them to a site on
the net – check out Photobucket, Picaso, etc. and then send everyone the
link. Not everyone wants to see
Hi Ian,
M I did this job on my 29-1. Mast down, mast cap off. dollars for Harken
halyard sheaves. The fit required some minor widening and cleaning up of the
cast. This was part of a program to ease halyard control and effort.
Replacement mast base blocks, organizers and clutches added
Hi
The 29-1 does not have the side access ports to the sheave axels. Argh.
mast cap off While at I rewired the mast lighting, VHF etc as a bundle
Don
On Oct 13, 2014, at 8:08 PM, Josh Muckley via CnC-List
cnc-list@cnc-list.com wrote:
I apologize for my ignorance since I don't
I hear nothing
On Oct 3, 2014, at 9:58 PM, Jim Watts via CnC-List cnc-list@cnc-list.com
wrote:
I see nothing.
Jim Watts
Paradigm Shift
CC 35 Mk III
Victoria, BC
On 3 October 2014 18:49, David Blair via CnC-List cnc-list@cnc-list.com
wrote:
Hi
I have tested my new cradle on our railway with great success. I will shift the
keel stop a bit aft and narrow the keel guides.
The question from the sage wise peanut gallery was how much of the boat weight
can rest on keel?
Don
Anchored at Turnbull Island North Channel
Hi
I have a note on my survey to improve battery locker ventilation. Currently
there is a 3 by 3 vent cowl to the cabin.
I think ventilation goals are:
1. Temperature
2. Combustible fumes
What is really needed?
What do insurance company surveys require?
Don
On Sep 28, 2014, at 12:01 PM,
Chuck
You are one of my sage sailing heros! Your wordly explanation and link to
www.boatstanda.com is very helpful.
The pads are on the bulkheads.
We are railway and cradle mining car boundso boatstands are for warm far
off places...
My revised plan is to set the foreword pads as a best
Hi,
While we are chatting about annual mast pulling our club Is looking at a
replacement for our mast crane.
We are looking for a design example/picture that is about 15' higher then most.
We haul out boats out on a marine railing with our cradle on it. The masts are
pulled on dry land
A handheld VHF or magnetic knife can put your autopilot into an alcoholic
stupor as you move around been there done that one LOL
A treasured sailing knife has been relegated to a mast pouch...
The VHF handheld is in my waist/thigh kit with gps and delorme tracker I
have been
the handheld VHF on my PDF totally causes my tiller pilot to have a
meltdown, as well as the bulkhead compass
Don
On Sep 9, 2014, at 10:04 AM, Jack Fitzgerald via CnC-List
cnc-list@cnc-list.com wrote:
Keep in mind the interference that the magnets in speakers may place on your
Hi
I am interested in at least one roll, perhaps 3, if long term storage is not a
problem.
Don
Oakville
On Sep 8, 2014, at 10:47 PM, Marek Dziedzic via CnC-List
cnc-list@cnc-list.com wrote:
If you are looking for the source, here they are. I bought mine from Compass
Marine. It seems
I found ethanol free gas from my chain saw dealer/mechanic. He is adamant about
not using ethanol gas in chain saws and weed whippers. It is a Shell station
that he pointed me to
Don
V34
Benjamin Islands
North Channel
Lake Huron
On Aug 18, 2014, at 12:42 PM, Marek Dziedzic via CnC-List
FYI
From: Sailing Anarchy Forums ad...@sailinganarchy.com
Date: August 9, 2014 at 2:05:36 PM EDT
To: donald.har...@gmail.com
Subject: Aislinn posted topic New Girl on the Dock
Sailing Anarchy Forums
Hardwater,
Aislinn has just posted a new topic entitled New Girl on the Dock in forum
On my 29 mark1:
1. Removed seat.
2. Redesigned pushpit curved down with swim access walk through, no gate.
3. Platform extending into and out of boat large enough width room and fore/aft
length to fit the WM mega blue boat seat. This raised me up enough to see and
sit in secured comfort when
I met a woman in Halifax and saw an ad on local Kijjiji in Oakville Ontario,
both searching for sail donations for their craft job making bags and things
from old sails.
me? I am liking for a heavy air blade LOL
Don
Viking 34
North Channel
On Jul 23, 2014, at 9:17 PM, John and Maryann Read
Foredeck cows and bees
Don
Viking 34
North Channel Lake Huron
On Jul 22, 2014, at 9:58 PM, Andrew Burton via CnC-List
cnc-list@cnc-list.com wrote:
Thanks, Wal. With you, David, and Dennis, among others, all suggesting the
Caframos it's a pretty easy decision.
Bees hitting the
That is no fun! I know of homes who transitioned off oil heat, had the inside
tank removed BUT did not remove the outside fill pipe.
A basement flooded with heating oil is a slippery slope of darkness
I might just remove the diesel filler plate
Don
On Jul 7, 2014, at 3:06 PM, Burt
any pointers to or lists of possible MEDS?
On Jun 23, 2014, at 12:57 PM, Andrew Burton via CnC-List
cnc-list@cnc-list.com wrote:
Just noticed Joel saying he'd had to turn around because a crewmember was so
sick on the way home from Bermuda. (Welcome home, Joel!)
This is a public
http://barrie.kijiji.ca/c-cars-vehicles-boats-watercraft-sailboats-Sailboat-as-is-where-is-All-is-Lost-W0QQAdIdZ603720077
Don
www.ncyc.ca___
This List is provided by the CC Photo Album
Email address:
CnC-List@cnc-list.com
To change your list
Hi
While the V34 is not out of the CC shop it was off their design tables. I am
considering purchasing a well built and cared for diesel V34. I am looking for
props and cons about the design and build.
Don
___
This List is provided by the CC Photo
63 matches
Mail list logo