Stus-List Re: [EXTERNAL] Re: Standing Rigging

The best Dynemma rigging is found here: https://www.colligomarine.com/products/standing-rigging It is not the standard SK75 or 099 stuff. It is heat set to eliminate creep. Joel On Mon, Apr 15, 2024 at 11:49 AM John McCrea via CnC-List < cnc-list@cnc-list.com> wrote: > I had my rigging

Stus-List Re: [EXTERNAL] Re: Standing Rigging

FWIW, in 2022 I used Rigging Only in Fairhaven Mass to make all new rigging for my 49. The total cost, with shipping, was around $15,000. Joel On Mon, Apr 15, 2024 at 9:24 AM Nathan Post via CnC-List < cnc-list@cnc-list.com> wrote: > Joe, > It is a bit of a challenge to find a rigger who will

Stus-List Re: C 34+ with trailer

Launch the boat. Empty trailer will be no problem! Joel On Fri, Apr 12, 2024 at 2:50 PM Jeff Nelson via CnC-List < cnc-list@cnc-list.com> wrote: > Yeah, at 12k lbs, likely need at least 2 volvo's. > or > Sportchassis.com would haul it with ease. > > Cheers, > Jeff Nelson > Muir Caileag >

Stus-List Re: Bilge pump breaker issue

When you cut the wires for the pump, turn on the switch. If there is a short in the wires the breaker will trip. Otherwise it is the pump. On Sun, Apr 7, 2024 at 10:09 PM cenelson--- via CnC-List < cnc-list@cnc-list.com> wrote: > My bilge pump breaker has recently started to disconnect

Stus-List Re: Understanding Polars

That’s pretty amazing! Joel On Fri, Apr 5, 2024 at 8:11 PM Dreuge via CnC-List wrote: > Hi, > > Just for the fun of it, I entered the text of your email into ChatGPT4. > > > You: > I have a set of polars for my C 34+ (below), but I am unsure of how to > interpret the downwind data. There is

Stus-List Re: Hints on swapping winches?

Don’t use plywood. Aluminum or G10. Joel On Fri, Mar 22, 2024 at 8:24 PM Dean McNeill via CnC-List < cnc-list@cnc-list.com> wrote: > I'm about to finally replace my old 2 speed Barient 25 primary winches on > my C 34, with Harken 46 Self tailing winches. > Anyone have experience doing a

Stus-List Re: What are these

Possibly water tight glands for different size wire? Joel On Sun, Mar 10, 2024 at 8:36 AM David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > I was sorting through my miscellaneous box from the boat and came across > these. Any idea what they are? Dave > > > Sent from my iPhonePlease

Stus-List Offshore opportunities

Greetings from St Martin! We are cruising the Islands this winter before returning to Annapolis via Bermuda. We are looking for crew to join us on either the St Martin to Bermuda leg late April or Bermuda Annapolis leg late May. We are using Chris Parker for our weather routing, and will wait

Stus-List Last minute offshore opportunity

One of my Bermuda crew has covid. We are planning to leave Annapolis Monday. Contact me if interested. -- Joel Hylas 49 Rule One Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray

Stus-List Re: Cruising Gulf Coast

Newport,+RI+USA+02840?entry=gmail=g> > > +401 965 5260 > https://sites.google.com/site/andrewburtonyachtservices/ > > > > On Oct 18, 2023, at 14:05, Joel Aronson via CnC-List < > cnc-list@cnc-list.com> wrote: > >  > > We will be there until about the 10th. Let

Stus-List Re: Cruising Gulf Coast

aps/search/26+Beacon+Hill+Newport,+RI+USA++02840?entry=gmail=g> > 02840 > <https://www.google.com/maps/search/26+Beacon+Hill+Newport,+RI+USA++02840?entry=gmail=g> > > http://sites.google.com/site/andrewburtonyachtservices/ > +401 965-5260 > > On Oct 18, 2023, at 12:39, J

Stus-List Re: Cruising Gulf Coast

Sounds like fun! We are planning to leave for Bermuda Monday. After a stop over, we head to the Carib for the winter before returning to Bermuda in April to hopefully stage a Med crossing mid May. Joel Hylas 49 Rule One Former owner The Office C 35/3 On Wed, Oct 18, 2023 at 12:17 PM CHARLES

Stus-List Re: [EXTERNAL] Re: Sizing an inverter

We have an old fashioned electric percolater we run off the inverter. It draws abut 75 amps for 3-4 minutes, so not much worse than the hair dryer. Joel On Wed, Oct 18, 2023 at 9:10 AM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > You can, you just have to think it through. >

Stus-List Re: Everyone ready for Ophelia?

We left Cape May yesterday so we can get home this afternoon. Stay safe! On Fri, Sep 22, 2023 at 11:38 AM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > This storm kind of snuck up on me, I am running around doing stuff right > now. First off was to get the Whaler out of the

Stus-List Re: Long Island sound

orings including >Shelter Island YC. Nice little town and a two minute ferry ride gets you >over to Greenport which is a large town, with super market etc. > > > Feel free to send any questions! And if you need dockage in Mystic, I am > the dock master at Ram Island YC in Noank,

Stus-List Long Island sound

We will be travelling from Mystic through LIS next month.Are there any 'must see' places between Mystic and Port Washington on either shore? -- Joel Hylas 49 Rule One formerly C 35 The Office Please show your appreciation for this list and the Photo Album site and help me pay the associated

Stus-List Re: Crew needed

gt; > +401 965 5260 > https://sites.google.com/site/andrewburtonyachtservices/ > > > > On Aug 20, 2023, at 12:31, Joel Aronson via CnC-List < > cnc-list@cnc-list.com> wrote: > > We are sailing from Annapolis to Bermuda on our Hylas 49 leaving > approximately October

Stus-List Crew needed

We are sailing from Annapolis to Bermuda on our Hylas 49 leaving approximately October 23. After about a week in Bermuda we head to St John. We have openings for both legs. We pay for provisions and docking. Please let me know if you are interested. Joel S/v Rule One -- Joel Please show your

Stus-List Re: Lithium battery source in USA?

Dave, I purchased batteries from lythbattery.com in China. No complaints! Check your insurance policy to make sure the batteries are not excluded before you invest the money. Joel On Mon, Aug 14, 2023 at 10:33 AM Dave S via CnC-List wrote: > Hello all, > Looking to upgrade my new boat from

Stus-List Re: Bottom paint- Pettit Black Widow

FWIW, on the Chesapeake, their Trinidad SR is the first choice. Joel On Wed, Aug 9, 2023 at 9:21 AM Andrew Burton via CnC-List < cnc-list@cnc-list.com> wrote: > Thanks, David. That’s good to know. > > Andrew Burton > 26 Beacon Hill > Newport, RI > USA02840 > >

Stus-List Re: Bilge blower & pumps

no experience but I've been told by Fawcett Marine they are junk. Joel On Thu, Jul 20, 2023 at 2:23 PM Doug Mountjoy via CnC-List < cnc-list@cnc-list.com> wrote: > I have a question for the group. Does anyone have experience with the > Seaflo brand of bilge blowers or pumps? I need to replace a

Stus-List Re: Bilge Pump Replacement

Jabsco diaphragm pumps On Tue, Jun 27, 2023 at 8:34 PM Randy Stafford via CnC-List < cnc-list@cnc-list.com> wrote: > What brands and models of bilge pumps have input hose connections? All > the Rule bilge pumps I’ve seen are designed to sit their bottoms in the > bilge, with no input hose

Stus-List Re: Engine strangeness

Dave, Start with the fuel tank. Look for crud in the tank and in the screen for the fuel pick up. Check every hose clamp in the system. Be sure the overflow outlet is not plugged. Be sure top of Racor is seated properly and vacuum gauge is tight. Change the filters just for peace of mind.

Stus-List Re: Bermuda 1-2

Sail fast and safe! Joel On Thu, Jun 15, 2023 at 9:55 AM John McCrea via CnC-List < cnc-list@cnc-list.com> wrote: > Listers, > > If interested I am racing in the Bermuda 1-2 return leg. We start this > morning. I am on a Morris Justine 36. Fleet winner on corrected time on leg > one. This my

Stus-List Re: Force 10 Stove

Even if it is the correct width, the pivot point may need to be moved. Not a big deal if you measure first. (I didn't, so I had to wrestle the stove twice) Virus-free.www.avg.com

Stus-List Re: Engine strangeness

David, Crud in fuel pick-up? You may have sucked it through. Or not! Joel On Fri, Jun 9, 2023 at 10:22 AM David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > I am out for the first time this season. Engine started right up. Motored > out of harbor for two hours. Turned engine off for

Stus-List Fall offshore passages

I hope everyone is having a good sailing season! My wife and I are sailing Rule One, our Hylas 49, from Annapolis/Norfolk to Bermuda and then St. John starting in late October. We could use one or two more crew to join us for each leg. Tentative dates are October 23 from Annapolis and November

Stus-List Re: Landfall 43 opinions

Shawn, There is one in day charter near me in the summer (near Annapolis) and in the islands in the winter. I wonder if it is the same boat. Owner is Australian if I recall correctly. It looks a lot like a Hylas 44. It seemed to be in good condition looking at it from the dock and seeing it

Stus-List Re: Chandleries

and BOE Marine and the GPS Store for electronics. On Fri, Mar 10, 2023 at 11:53 AM Joel Aronson wrote: > Fawcett Boat in Annapolis is always less than West and has free shipping > on most orders over $99. They also have more sailing gear than the local > West. I use a Port Supply discount at

Stus-List Re: Chandleries

Fawcett Boat in Annapolis is always less than West and has free shipping on most orders over $99. They also have more sailing gear than the local West. I use a Port Supply discount at West. It varies from 5% to 60% depending on the item. Joel On Fri, Mar 10, 2023 at 11:39 AM Jeffrey A. Laman

Stus-List Re: Motor Mounts

Or a heli-coil Joel On Fri, Mar 10, 2023 at 8:11 AM Rob Hamlin via CnC-List < cnc-list@cnc-list.com> wrote: > Thanks Jeff that was my other question, what’s under the fiberglass. > > Yes I was able to get the bolts out. Good thought on retapping and larger > size. > > -Rob > > Sent from my

Stus-List Re: Racing at night

We did one race with motion detector lights on the toilet bowls! Joel On Tue, Feb 28, 2023 at 11:59 AM Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: > I’ll repeat my night racing advice – toss a glowstick in the icebox. This > stops people turning on the cabin lights to read the

Stus-List Re: Racing at night

Of course, you can't see the red telltale with a red light. Some of my crew (me) likes having a small flashlight mounted to light up the telltales. Others prefer the wind instrument. Sailing by feel is important either way. If the wind is steady, keep the angle of heel constant. Joel On Tue,

Stus-List Re: Boatless again

Length of the boat is not the only factor in maneuverability. My Hylas 44 had a fairly short keel and a 3 blade max prop. It would only back to port. My 49 has a much longer keel and a Gori prop and can be backed in either direction easily. This is not an indictment of the Max, its just how it

Stus-List Re: Boatless again

Danny, C 43? Hylas 46/49/54/56 (no separate shower on the 49) Outbound 46 (hard to find) Bristol (older) Good luck with the search! Joel On Wed, Feb 22, 2023 at 1:42 PM Danny Haughey via CnC-List < cnc-list@cnc-list.com> wrote: > Hi guys, > > So, We sold Rum Runner IV and we're going to start

Stus-List Re: Limber Holes

Dremel with a flex shaft to lower the holes? Joel On Thu, Jan 26, 2023 at 10:50 AM Matt Wolford via CnC-List < cnc-list@cnc-list.com> wrote: > Thanks, Chuck. I’m good about keeping a reasonably dry bilge. In > addition, because I’m at a dock with electricity, I keep a dehumidifier on > board

Stus-List Re: Thru Hull

Look at Groco: https://www.groco.net/products/fittings/thru-hull-fittings and a seacock from them. Joel On Thu, Jan 19, 2023 at 12:35 PM John McCrea via CnC-List < cnc-list@cnc-list.com> wrote: > I did that job on our 36 last year. I did not have the original seacocks. > Prior owner had

Stus-List Re: TowBoatUS is it worth it?

If you are a West Gold member you can get a free Boat US membership. Even if you have to pay it’s worth it On Sat, Jan 14, 2023 at 1:57 PM Bob Mann via CnC-List wrote: > Chuck, > > unless you're going far and need a tow, it sounds like you've got your > situations covered. I've used them once,

Stus-List Re: Replacing Original Boom

Randy, I would not get the stoppers for the inboard end. They grab at the worst possible time. I removed them from both of my Selden booms. Joel On Thu, Jan 5, 2023 at 10:58 AM Randy Stafford via CnC-List < cnc-list@cnc-list.com> wrote: > Happy New Year Listers. > > I’m contemplating

Stus-List Re: C 35 Mk I Recommendations for Sailmaker

For a headsail, the best value IMHO is national sail supply in Florida if you can get a stock headsail. They are a huge Rolly Tasker dealer, and their retail price is lower than my local dealer's wholesale price. If you are OK doing your own measurements for the main, Bacon Sails in Annapolis.

Stus-List Insurance - again

Happy New Year! I've been looking for insurance to cover our boat in the Caribbean and Med. READ THE POLICY BEFORE YOU BUY! I got what I thought was a good quote through a British broker until I read that the value of the mast decreased by 5% per year - i.e. a 20 year old mast was not insured.

Stus-List Re: Wind instrument conundrum

The new B WS310 wind instrument is garbage. The one I installed lst spring lasted 1/2 way to Bermuda, and the replacement is DOA. The B forum is full of similar complaints. Joel On Tue, Dec 20, 2022 at 10:34 AM Bill Coleman via CnC-List < cnc-list@cnc-list.com> wrote: > From someone who has

Stus-List Re: Moving 43 landfall from GA to FL and riggers.

I was very happy with wemoveboats.com. Joel On Thu, Dec 1, 2022 at 2:15 PM david coleman via CnC-List < cnc-list@cnc-list.com> wrote: > Hello all, > First time user here.Who has experienced a good boat transport > company.Looking for names .Also any good names of riggers that service Port >

Stus-List Re: Marina/boatyard fires

Not Mystic Seaport: Seaport Marine is across the Mystic River from downtown Mystic. Seaport Marine is at 2 Washington St. and has a waterfront restaurant, Red 36, and a retail store, Fighting Lady Tackle Co., according to its website. Prestige Yacht Sales, which is also located at 2 Washington

Stus-List Re: Minimum list of Tools to be kept onboard a boat

https://www.passagemaker.com/technical/the-90-toolkit?utm_campaign=PSM%20-%20NL%20-%20Channels%20Campaign_medium=email&_hsmi=234499401&_hsenc=p2ANqtz-88rMCV0L_4H5xk3G_8zuQlPLutnF703yX-sHzkRn66WnYcGrVJlqw5cRmWKi8TQUDjMmM3PXv3228kLju5La0lUtSdLw_content=234499401_source=hs_email On Wed, Nov 9, 2022

Stus-List Re: charger/inverter

FWIW, I went with Vitron with separate units for inverter and charger based on my electrician's recommendation. Joel On Fri, Nov 18, 2022 at 10:56 AM Bill Coleman via CnC-List < cnc-list@cnc-list.com> wrote: > Heart, now Xantrex seems to dominate as far as I know. > I have had one of each,

Stus-List Re: Minimum list of Tools to be kept onboard a boat

Basics: Tapes- Silicone repair, electrical/rigging and duct. For screwdrivers a Klein 11 in 1 and 4:1 stubby, #3 phillips and large flat blade Channel locks, adjustable wrenches and box wrenches, SAE and metric, allen wrenches SAE nd metric Crimpers Strippers Battery powered multi tool and drill,

Stus-List Re: 3M 4200

De-bond On Mon, Nov 7, 2022 at 7:58 AM John Read via CnC-List wrote: > After 40 years, it is time to rebuild my forward main hatch. Issue is it > is bedded to hull with 3M 4200. Any suggestions on how to break that seal? > > > > John Read > > Legacy III > > 1982 C 34 > > Noank, CT > > > --

Stus-List Re: Engine panel button/switch replacement

Or a crows foot:

Stus-List Re: Woodpecker attacks genoa

Weeds, Alligators, woodpeckers - What's next? Joel On Fri, Sep 16, 2022 at 11:35 AM Marek Dziedzic via CnC-List < cnc-list@cnc-list.com> wrote: > They drum to mark their territory, as well. I have seen (and heard) them > drumming on the telephone poles (esp. the top metal cap) and on our >

Stus-List Re: Partially furling the genoa when racing

FWIW My first move is to reef the main upwind, even with a foam luff gennie. Joel On Mon, Sep 12, 2022 at 10:25 AM Hoyt, Mike via CnC-List < cnc-list@cnc-list.com> wrote: > Hi David > > > > First I find it unusual to hear of a J27 with a furling genoa. We had a > J27 that came that way and it

Stus-List Re: anyone try this chafe guard?

Joe, I tried it, or something similar, years ago. It used two sided tape that left the edges sticking up off the deck. Be careful where you put it so you don't slice a body part on the edge. Joel On Thu, Sep 8, 2022 at 12:11 PM Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: >

Stus-List Re: C Steak Rub

Probably the salt that clumps. Is there a low sodium option? Joel On Tue, Sep 6, 2022 at 4:51 PM Dennis C. via CnC-List wrote: > Okay, so Stu doesn't sell a C brand steak rub. I wanted to make it > "list legal". :) List traffic has been light so here's a new thread. > > Although I'm usually

Stus-List Re: Running Lights Blowing Fuses

So the screws touching the stemhead are causing a short? Usually the light fixture is some sort of non-conductive plastic. Are there any old wires touching the stemhead (if you can see from inside the anchor locker)? Joel On Thu, Aug 11, 2022 at 8:11 PM Randy Stafford via CnC-List <

Stus-List Re: [EXTERNAL] Re: Lithium Batteries

certain age, never mind the effect on > the boat. > > Joe > > Coquina > > > > *From:* Joel Aronson via CnC-List > *Sent:* Friday, July 29, 2022 11:54 AM > *To:* Stus-List > *Cc:* Joel Aronson > *Subject:* Stus-List Re: [EXTERNAL] Re: Lithium Batteries >

Stus-List Re: [EXTERNAL] Re: Lithium Batteries

flooded 8D is 160 pounds. 200 aH Lifepo is 40. On Thu, Jul 28, 2022 at 6:26 PM Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: > 1 AH means you get one amp for one hour. > > Power is amps times volts, so 1 amp at 12 volts is half as much power as 1 > amp at 24 volts. > > Amp-hours

Stus-List Re: [EXTERNAL] Re: No recent mail - now alternator belt

Joe, Renogy is having a great sale. If I hadn't purchased two from China last year that would be my choice. Joel On Mon, Jul 25, 2022 at 9:29 AM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > To add to my fun it was about sunset and my batteries are about shot. I > had 16

Stus-List Re: Barient 26 winch questions

Joe Can't help on the diameter. Diagram: http://www.cncphotoalbum.com/winches/winches8.htm Lewmar springs/pawls should fit just fine. Joel (still lurking) On Wed, Jul 13, 2022 at 2:23 PM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > Does anyone know the drum diameter of the

Stus-List Re: Painting hull

Fred Found it very hard to work with. Very thin and sets up very quickly on a sunny day. Joel On Fri, Jun 24, 2022 at 4:05 PM Fred Hazzard via CnC-List < cnc-list@cnc-list.com> wrote: > Do any of you listers have experience rolling and tipping your boat with > Epifanes 2 part poly-urethane? >

Stus-List Andrew Burton

Congrats to former C Andy Burton for taking 1st in class and second in division in the Newport Bermuda race on his Baltic 47, Masquerade! It was hardly champagne sailing against a formidable fleet! -- Joel

Stus-List Re: Cost to replace UV cover

U V cover replacement is by the foot. What else did they recommend? New webbing? Restitching? On Mon, Jun 20, 2022 at 7:34 PM Bill Coleman via CnC-List < cnc-list@cnc-list.com> wrote: > Maybe it's time for a SailRite machine! > On the other hand, isn't there some kind of a white sticky material

Stus-List Bermuda return crew

While I wait for a new starter I decided to leave the boat in Bermuda and fly home. The new plan is to depart around July 5 for Annapolis. Please let me know if you are interested. Joel -- Joel

Stus-List Return crew

All We had to return to Bermuda because the starter failed I am looking for available crew who could fly to Bermuda and help bring our Hylas 49 back to Annapolis early next week. Please email me if available. I had assembled a great group of C but their schedules did not take into account a four

Stus-List Re: Bilge Pumps

Whale for me Joel On Mon, Jun 13, 2022 at 4:36 AM Randal Stafford via CnC-List < cnc-list@cnc-list.com> wrote: > Hey Listers, > > What are your favorite bilge pumps? > > I think I’m pretty done with RuleMate 1100s. I’ve had really mixed > experiences with their reliability. > > I’m general I’d

Stus-List Re: Batteries again

I don't know Prowse, but would hardly call him a hack. He has reviewed batteries and found that the advertised specs were not true and has exposed shoddy construction. He's not an engineer, but never claimed to be. He's just another free resource out there in the wild. My 2 cents Joel On Wed,

Stus-List Re: Marinas - Northern Chesapeake

Brian, I don't know how long you can leave a boat on a mooring in Annapolis, but a much cheaper option. Check with the harbormaster. There are several marinas just north of Annapolis in Whitehall Bay that will be cheaper if they have space. Or you can move north to the Magothy or Middle River.

Stus-List Re: knot meter not working

The transducer is made by Airmar in New Hampshire. Airmar is owned by Gemeco. You might contact their tech support. I've had the temp fail on that model, but not all 3. the warranty is 2 years from manufacture, not install. Sorry! On Tue, Apr 26, 2022 at 10:37 AM ALAN BERGEN via CnC-List <

Stus-List Re: Recommendation: Osprey Composites - Herrington Harbor, area Riggers

Just replaced 30 year old wire on my Hylas. Everything still looked great until we removed the furler drum. There was a LOT of corrosion under the furler. I've been told that for salt water boats the rod needs to be inspected and reheaded every 10 years and wire should be replaced at ten years

Stus-List Re: Recommendation: Osprey Composites - Herrington Harbor, area Riggers

I highly recommend Osprey! They've done work on my last two boats. Not cheap, but top quality work! Can't help on the rod. When I needed help with my Edson steering, Edson recommended M Yachts, but I've never used their rigging services. Joel On Sun, Apr 17, 2022 at 4:37 PM cenelson--- via

Stus-List Re: Defender

Yesterday I ordered some recharge cartridges for my PFDs yesterday. The sale price savings was almost equal to the marked-up shipping charges. Last night I got a shipping confirmation. At least they are still efficient. Joel On Sun, Mar 27, 2022 at 3:11 PM Martin DeYoung via CnC-List <

Stus-List Re: First Aid Kit (inland & coastal)

Also, gauze, tape, chemical 'ice' packs, couple of short battens for splints, neosporin, advil/tylenol, ace bandage Look at the Adventure Medical kit and build your own using the inventory. Joel

Stus-List Re: hard dodger

That's impressive! I'd like to see a photo of it on the boat. Virus-free. www.avg.com

Stus-List Re: Confession Time - "Dark Side"...not so dark

Congrats! Looks like a really comfy ride! Joel On Thu, Jan 6, 2022 at 3:00 PM David Risch via CnC-List < cnc-list@cnc-list.com> wrote: > We have sold the family home and purchased *Rogue* aka “The Beast” > (Gulfstar 49 MY) and are living aboard her in Florida. Specific location > will change

Stus-List Re: Winter Sailing Heaven

Joe, Sounds awesome! Our new boat came from Newport Beach, where they have to keep sea lions off the boats. The PO rigged an electrified cattle wire after a sea lion destroyed the bimini. Birds are a PIA, but it could be worse! Joel On Mon, Dec 13, 2021 at 8:16 AM Della Barba, Joe via

Stus-List Re: [EXTERNAL] mounting chart plotter at helm

I have a RAM mount on the pedestal guard, but rarely rotate the plotter. Joel On Fri, Dec 3, 2021 at 8:33 AM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > I have a plotter at the helm of my 35 MK I. It faces aft, if I want to > navigate from forward, like I do about 90% of the

Stus-List Re: Rudder shaft play

John, IIRC The Office had speakers back there instead of access plates. If I removed them I could reach 3 of the 4 the nuts on the underside of the cockpit. Minimized the time in the lazarette. Joel On Fri, Dec 3, 2021 at 12:33 PM John Read via CnC-List < cnc-list@cnc-list.com> wrote: > So I

Stus-List Re: Stuff for sale

...@gmail.com > Sent: Tuesday, November 23, 2021 11:13 AM > Subject: Stus-List Re: Stuff for sale > > sorry, sailatlan...@gmail.com > > On Tue, Nov 23, 2021 at 10:56 AM Joel Aronson via CnC-List < > cnc-list@cnc-list.com> wrote: > >> I've got the following

Stus-List Re: Stuff for sale

sorry, sailatlan...@gmail.com On Tue, Nov 23, 2021 at 10:56 AM Joel Aronson via CnC-List < cnc-list@cnc-list.com> wrote: > I've got the following instruments for sale: > > B Network (NMEA 183) ,Depth Speed, Wind & Compass. > > Ray ST60 Tridata, speed and wind (with br

Stus-List Stuff for sale

I've got the following instruments for sale: B Network (NMEA 183) ,Depth Speed, Wind & Compass. Ray ST60 Tridata, speed and wind (with broken terminal) Asking $200 each for the working instruments, $50 for the ST60 wind with domestic shipping. Ten percent goes to Stu. Email me at

Stus-List Re: Garboard

I had one installed on The Office. It probably wasn't necessary, in Annapolis, If you install one, screw in a short pipe nipple so the water does not run down the keel. On Mon, Nov 22, 2021 at 9:26 AM Tom Sancton via CnC-List < cnc-list@cnc-list.com> wrote: > > Looking at putting a garboard on

Stus-List Re: Haul Out Question

Attached to forstay On Sat, Nov 13, 2021 at 8:44 AM Brian Morrison via CnC-List < cnc-list@cnc-list.com> wrote: > Hello CnCers, > > I’m hauling out for the winter at a new boat yard. I’m having the mast > pulled to do some work. I’ve never pulled the mast with the furling drum. I > was wondering

Stus-List Re: Source for sheaves

Try these guys: http://riggingonly.com/sheaves04.htm Joel On Tue, Nov 9, 2021 at 3:13 PM Dennis C. via CnC-List wrote: > https://www.rigrite.com/ > > https://www.zephyrwerks.com/ > -- > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > > On Tue, Nov 9, 2021 at 1:58 PM Rod Stright via CnC-List <

Stus-List Re: C 121 in a pickle

Randy is not on his boat (Grenadine). Don't know the name of the boat he is on. Joel On Tue, Nov 9, 2021 at 2:03 PM Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: > https://forecast.predictwind.com/tracking/rally/2021-sdsa-caribbean-rally/ > > > > No Grenadine shows up, but two

Stus-List Re: Main halyard shackle

Is it a J shackle? https://www.westmarine.com/buy/tylaska-marine-hardware--j-lock-j8-shackle--11830239 Are you tightening by hand or using a tool to tighten? On Tue, Nov 9, 2021 at 9:39 AM Bill Coleman via CnC-List < cnc-list@cnc-list.com> wrote: > A snap shackle on a halyard is not likely to

Stus-List Re: Bermuda return crew 2022

.com> wrote: > >> Good luck >> >> On Thu, Oct 28, 2021 at 2:34 PM Joel Aronson via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> All, >>> >>> Our new to us Hylas 49 arrived from California by truck yesterday. She >>

Stus-List Bermuda return crew 2022

All, Our new to us Hylas 49 arrived from California by truck yesterday. She is well equipped, with a generator, watermaker, SSB, sat phone and all the required safety gear. She'll have new standing rigging and electronics by spring. We will be doing the Annapolis Bermuda race on her, and once

Stus-List Re: [EXTERNAL] Cockpit Floor Grating for a 34

Whitecap Marine sells the wood pieces. Joel On Tue, Oct 26, 2021 at 1:05 PM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > I had one on a previous boat and they are really good dirt collectors! > > Make sure it fits so you can pick it up. > > > > Joe > > Coquina > > > > *From:*

Stus-List Re: Bottom Paints Again

Petit sells one. Probably more expensive but effective too. On Tue, Oct 26, 2021 at 8:59 AM dwight veinot via CnC-List < cnc-list@cnc-list.com> wrote: > Thanks. Is that the one that works. I had a ton of little white barnacle > on my prop and prop shat at haul out. I don’t think the prop would

Stus-List Re: Electric Bilge Pump

I’ve had the fuse holder fail on those switches! Bypass the fuse to test it On Sun, Oct 17, 2021 at 11:40 AM Ken Heaton via CnC-List < cnc-list@cnc-list.com> wrote: > Hi Rob, > > Did your pump work on "Manual" in the past? Meaning it is wired > correctly? If so, the "Manual" position on the

Stus-List Re: Used spinnaker

Fred I was able to get a chute in 4 weeks from National Sail Supply. About 1/3 price of North Joel On Mon, Oct 11, 2021 at 4:37 PM Fred Hazzard via CnC-List < cnc-list@cnc-list.com> wrote: > > Yesterday my 3/4 oz. chute exploded in a big wind. > Now I am looking for a used replacement. Lead

Stus-List Re: leeward layline

Here's another way to think about it: You are sailing 140 degrees off the wind, or 40 degrees form DDW. Gybe when the bearing to the mark will allow you to turn 80 degrees. (I can't tell you how many times I get impatient and gybe too soon because I don't follow this method) Joel On Wed, Oct

Stus-List Re: Perfect boat

The "perfect boat" does not exist. It could always be a little bigger/smaller, roomier, have more storage and tankage, be faster and more stable. My Pearson 28 was a great starter boat/overnighter. My C 35/3 was an awesome boat, but small for offshore. My Hylas 44 is a great offshore boat with

Stus-List Re: Bow Repair

Sorry Kato marine On Sat, Sep 25, 2021 at 11:05 AM Joel Aronson via CnC-List < cnc-list@cnc-list.com> wrote: > Kari Marine in Annapolis > > On Sat, Sep 25, 2021 at 8:45 AM Brian Morrison via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Hello All, >

Stus-List Re: Bow Repair

Kari Marine in Annapolis On Sat, Sep 25, 2021 at 8:45 AM Brian Morrison via CnC-List < cnc-list@cnc-list.com> wrote: > Hello All, > > I had an unfortunate encounter with a buoy and my 1979 C 34 suffered > pretty severe damage to the bow. The chain plate for the forestay was bent > and needs to

Stus-List Re: In search of Barient 17 self tailing winch retaining nut

ARCO. On Tue, Sep 21, 2021 at 12:03 AM Doug via CnC-List wrote: > There is an outfit in Australia that has spare parts for barient and > Barlow winches. The name escapes me.. > > > > Doug Mountjoy > sv Rebecca Leah > C & C Landfall 39 > Port Orchard Yacht Club > Port Orchard, WA > > >

Stus-List Re: anyone gone lithium?

Sterling makes an alternator protector. I think Peter Kennedy sells them. Joel On Tue, Sep 14, 2021 at 9:27 AM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > My batteries are about shot and I am thinking of going to lithium > batteries. I have to say I thought I knew this

Stus-List Re: Boat Donation to Charity?

Klingon On Sat, Sep 11, 2021 at 2:50 PM Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: > Ed – gotta ask – is there a dead body in the boat? Core saturated? Seems > like a nice boat. > > > > *From:* Edd Schillay via CnC-List > *Sent:* Saturday, September 11, 2021 1:16 PM > *To:*

Stus-List Re: Boat Donation to Charity?

There are huge tax differences between donating to a charity that sells her and one who uses her for: years before selling her. You want the later. Joel On Sat, Sep 11, 2021 at 1:55 PM John McCrea via CnC-List < cnc-list@cnc-list.com> wrote: > Sea Scouts in CT would take her and use the boat

Stus-List Re: Moving on up!

gt; -- > Shawn Wright > shawngwri...@gmail.com > S/V Callisto, 1974 C 35 > https://www.facebook.com/SVCallisto > > > On Sun, Sep 5, 2021 at 11:12 AM Joel Aronson via CnC-List < > cnc-list@cnc-list.com> wrote: > >> I got a case of 5 foot itis. We bought a Hyla

Stus-List Re: Moving on up!

Danny 145. On Sun, Sep 5, 2021 at 9:08 PM DJ via CnC-List wrote: > You're kidding? > > How much are you hoping to get for the 44? > > Danny > > On Sep 5, 2021 2:11 PM, Joel Aronson via CnC-List > wrote: > > I got a case of 5 foot itis. We bought a Hylas 49 and am

  1   2   3   4   5   6   7   8   9   10   >