Don, I have the C 41 "Triumph" on your list. I would like you to add the
following information:
HIN #ZCC41096C586, Year Bought: 1986, Club: Anchorage Marina YC, phone: 248
930-7949
thanks for your effort with the list
Tony
From: CnC-List on behalf of Donald
Edd,
Tony Wroblewski / Triumph / C 41 / 1986 / 25045 / triump...@hotmail.com /
Holland, Mi.
From: CnC-List on behalf of Derek McLeod via
CnC-List
Sent: Sunday, October 6, 2019 12:08 PM
To: Edd Schillay
Cc: Derek McLeod ; Edd Schillay via CnC-List
Subject:
From: CnC-List on behalf of Derek McLeod via
CnC-List
Sent: Sunday, October 6, 2019 12:08 PM
To: Edd Schillay
Cc: Derek McLeod ; Edd Schillay via CnC-List
Subject: Re: Stus-List C Lister Roll Call
Derek McLeod / Aileron / 29-2 / 1983 / 203 /
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462
502-584-7255
-Original Message-
From: Tony Wroblewski via CnC-List
To: cnc-list@cnc-list.com
Cc: Tony Wroblewski
Sent: Tue, May 21, 2019 8:52 am
Subject: Re: Stus-List Straightening Stanchions...
David, just went th
David, just went through the process of rationalizing straightening vs. new for
a couple of slightly bent stanchions. Klacko Marine will build new for about
$50 ea. but shipping is about the same $ from Canada to the US. Went to a local
shop in Holland, Mi (Quality Marine Electronics) and got
I am new to the stack pack family - just installed this week. Ours is a Doyle
Cradle Cover (Doyle Stack Pack not attached to the sail). Mast had a Tides
track. The sail is also new a North 3Di and very stiff. I could use any tips
on handling this system because I'm having trouble getting the
Don, the owner of Cinkel was Jim Thoman. After Cinkel closed he had a company
called Spindleworks. He was a good resource, and if anyone on the list knows
his whereabouts, it may be a benefit to the list. Cinkel made my mast also
right after yours. 41 C/B #96.
Sent from my iPad
On Mar 8,
Jim, my appt is at 9:40 so noon is OK.
From: CnC-List on behalf of robert via CnC-List
Sent: Tuesday, October 10, 2017 9:07:24 AM
To: cnc-list@cnc-list.com
Cc: robert
Subject: Stus-List Fresh water plumbing
Has anyone had experience with changing the sheeves with the mast up? We have a
Cincel mast and there are no access points on the side of the mast for removal
of the axle. Assuming there's a cap to remove on top.
___
This list is supported by the
I have the same issue but for a C 41 centerboard boat with 4'-11" draft. The
base would be 16'-0" X 8'--0" but need to determine the configuration of the
stands. Does anyone have a similar existing cradle that you can share the
dimensions?
Tony Wroblewski
'86 C 41 C/B Triumph
Holland, Mi.
Does anyone on the list know whether the C masts in 1986 were painted with a
one component (enamel) or two component (urethane) paint. Ours is a C 41 with
a Cinkel mast.
On another topic, the masthead sheeves need to be replaced. Does anyone have a
diagram or info on how to replace. There is
Installed the tides track on Triumph in 2000 and went with a loose footed main.
Tides track is great - no problems since installed. As mentioned, the sail
falls completely down with full battens. No inserts needed!
> To: cnc-list@cnc-list.com
> Date: Tue, 26 Jul 2016 22:12:16 -0400
> Subject:
Macatawa Bay Yacht Club runs a Wed night series, you might contact them or post
a note on the Anchorage Yacht Club board when you're in town. Both are in
holland on lake Macatawa.
To: cnc-list@cnc-list.com
Date: Tue, 7 Jul 2015 19:53:26 -0400
Subject: Re: Stus-List Club Racing West Coast of
Eric, after having done this job a couple of times, a multitool with a flat saw
blade makes short work of the removal. Place the blade between the window and
fiberglass and cut away. Removes very little gel coat if you're carefull.
I have had the same problem on my Yanmar 3gm30 for years. Exactly as you
describe. Since it would start on the second try all the time it was no
problem. One time it wouldn't start at all for 10 minutes and caused me to find
the source. Tightened the battery cables and no problems for a year.
15 matches
Mail list logo