Stus-List Re: universal M20 diesel question

Is the prop clean? I may also be the fuel filters. It sounds like low fuel flow. Put in new filters, and bleed the system. DougSent from my T-Mobile 4G LTE Device Original message From: Dave via CnC-List Date: 9/7/21 18:17 (GMT-08:00) To: cnc-list@cnc-list.com Cc:

Stus-List Re: IDA - C check in

Glad to hear all are ok. Out here on the west coast I would like a little bit of your wind. Sailind down to San Diego in 2-10kts of wind makes for a long motor. Heading out the Straits of Juan de Fuca we beat head on into 19kts of wind. Turned the corner at Cape Flattery today, we were able to

Stus-List Re: filling holes in coachtop

Counter sink top and bottom, tape over bottom of hole. Then fill with thickened epoxy. I go for about the consistency of ketchup. Without the counter sink. It will crack over time. DougSent from my T-Mobile 4G LTE Device Original message From: Wade Glew via CnC-List Date:

Stus-List Re: any Bruce anchor users?

I went with the excel also based on Panopes observations.  I have the 45lb excel backed up by 300ft 5/16 G4 chain. A friend and I were rated on his 35lb Spade anchor and 100 ft of chain no issues. His boat is a Pretorian 35, 15k lbs , mine is a landfall 39 24k lbs. The 2 of us have been on my

Stus-List Re: any Bruce anchor users?

A true Bruce is better than a Danforth. I have an Excell based on these videos.They are long videos but I think very informative.   https://youtu.be/smgWTtFuk3Uhttps://youtu.be/ua21k2abK1QFWIW Sent from my T-Mobile 4G LTE Device Original message From: "Della Barba, Joe via

Stus-List Re: Steering cable

FWI. Back in the day of rigging airplanes. I would use heat shrink (non adhesive type) to connect the old and new cables. Pull out old cable gently and new will be routed correctly.  DougSent from my T-Mobile 4G LTE Device Thanks to all of the subscribers that contributed to the list to help

Stus-List Re: 1984 Landfall 43

Hi Kevin,I also have the LF 39. The chain plates are 3/8th stainless bar stock through bolted to frame members glassed to the hull, they are about 3 feet long. I pulled my mast 3 years ago, replaced the rod rigging, and basically rebuilt the mast. Goose neck was trashed. Major reason for

Stus-List Re: C 34 re-power HP

I would go with the largest 30 to 35 hp. You may not always need the extra power, but it is a lifesaver when you do. Sent from my T-Mobile 4G LTE Device Original message From: Jeremy Ralph via CnC-List Date: 2/16/21 14:08 (GMT-05:00) To: cnc-list@cnc-list.com Cc: Jeremy

Stus-List Re: Anyone need a Racor vacuum gauge

Hi JoeI would love one. DougSent from my T-Mobile 4G LTE Device Original message From: Ourtime via CnC-List Date: 2/15/21 13:22 (GMT-05:00) To: cnc-list@cnc-list.com Cc: Ourtime Subject: Stus-List Re: Anyone need a Racor vacuum gauge If it's still available, I'd like to

Re: Stus-List 35-5 outhaul control line

Is the current outhaul line still there? Can you attach a new line to old and pull it thru?I use whipping twine to sew old and new lines end to end then gently pull in new line. Doug Mountjoy Sv Rebecca Leah LF39253-208-1412Port Orchard YC wa. Original message From: Luke

Re: Stus-List therapy and patriotism

Andy, I have the same philosophy. I too spend all my money on Rebecca Leah. Sometimes I'll sneak a few dollars to spend on my hot rod truck or motorcycle. BUT I don't let her know. Last summer she got new rigging,  and she just  got new electronics.  I think I might need some intervention. LOL. 

Re: Stus-List Weird rod

Both of the landfall models (38 & 39) have not had this bar. The 38 was hull #4 so maybe this rod thing is post 1979, or it wasn't installed on the landfall models. Doug Mountjoy Sv Rebecca Leah C & C LF39253-208-1412Port Orchard YC wa. Original message From: Tom Buscaglia via

Re: Stus-List C as offshore boat?

My Landfall 39 has crossed the Pacific a couple of time with previous owners. Although not a light air boat (compared to the LF38), It feels solid under full sail in 25kt winds. Doug Mountjoy Sv Rebecca Leah LF39 1988253-208-1412Port Orchard YC wa. Original message From: Jeff

Re: Stus-List Rigid vs. flexible sewage holding tank

I also had a flexible holding tank that failed. Go with a hard plastic one.  Doug Mountjoy Sv Rebecca Leah LF39253-208-1412Port Orchard YC wa. Original message From: Shawn Wright via CnC-List Date: 4/23/19 08:37 (GMT-08:00) To: cnc-list@cnc-list.com Cc: Shawn Wright Subject:

Re: Stus-List Standing rigging replacement on 35-2

Shawn, I replaced my 30 yr old rigging last summer only because I plan on doing extended off shore cruising. Had I not been planning this I would not have done so, as the cost was that of a new car. I did have to replace 1 roller furler, goose neck, and did a couple of up grades. If your

Re: Stus-List Quadrant cable tension

I tighten mine until there is very little slop in the wheel. I don't think there needs to be  much tension. Doug Mountjoy Sv Rebecca Leah LF39Port Orchard YC wa. null___ Thanks everyone for supporting this list with your contributions. Each and

Stus-List Folding prop vs feathering

I hauled Rebecca Leah this past weekend to install new thru hull transducers. Been up grading my electronics. I noticed that my prop has some serious pitting  and loose blades. I currently have a feathering prop. My plan is to do some extensive blue water cruising in the near future. So my

Re: Stus-List 3QM30

When I had my LF38 with a 3QM30. I did try a stop cable, but it was not a cable that locked. Pushing down on the throttle would override the stop cable.The way this engine shuts down is by closing the throttle beyond the idle position. From idle to shutdown is only about 1/2 inch movement on a

Re: Stus-List Broken shift cable

Hi Fred, I can't help on length, but for installing new cable. Before pulling old cable out tie a 1/8 inch line to the cable to use for pulling new cable back in place. Once cable is out it is a simple chore to measure. I use this method for pulling wires, cables or what ever. Doug Mountjoy Sv

Re: Stus-List Autopilot tiller arm on LF38 *without* bolting to quadrant?

Hi Patrick,I installed a belowdecks autopilot on Pegasus. Contact Kyle as he now has Pegasus there in Shilshole. Maybe he'll let you look at the way I installed it. Good luckDoug. Doug Mountjoy Sv Rebecca Leah LH39Port Orchard YC wa. Original message From: Patrick Davin via

Re: Stus-List Fixed port ahead of slider, C 37/40+

Inch wide tape would be more than strong enough. IMHO.Doug Mountjoy Sv Rebecca Leah LH39Port Orchard YC wa. Original message From: Bruce Whitmore via CnC-List Date: 3/1/19 10:46 (GMT-08:00) To: CnClist Cc: Bruce Whitmore Subject: Stus-List Fixed port ahead of slider, C

Stus-List Electronics For Sale

I am upgrading my electronics and need to get rid of my old stuff. Furuno 1720 radar display and dome no cableGarmin 4208 plotterGarmin 3205 plotterWatchmate ais display, needs an ais reciever.Garmin network hubGarmin GSD 22 Datamarine link 5000 wind, speed,depthDatamarine 5000.Datamarine wind

Re: Stus-List Hull windows

My thought on this is, unless they have found a way for plexiglass ( I use this term loosely) to become one with the fiberglass. It will leak. Doug Mountjoy Sv Rebecca Leah LH39Port Orchard YC wa. Original message From: David Knecht via CnC-List Date: 2/16/19 07:43

Re: Stus-List Mast Wedge Help

Only thing I can recommend is run a cable down toe out side corners of steps on each side of last. This will help prevent lines from getting tangles in the steps. Doug Mountjoy Sv Rebecca Leah LH39Port Orchard YC wa. Original message From: "Steven A. Demore via CnC-List" Date:

Re: Stus-List Some Sunday morning reading. Rogue Wave, the whole story.

WOW. always amazed at how much a boat can take. Doug Mountjoy Sv Rebecca Leah  LH39Port Orchard YC wa. null___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the

Re: Stus-List Reversing my newport 41 Mk1 1977 Trinity

I have problems backing out of my slip into a very narrow fairway. I have a bow in Port tie. Backing out I have to pull forward past my slip, back into my slip using the port prop walk. Then pull out forward. Find it is much easier to just back in to begin with. Luckily I have a bunch of boat

Re: Stus-List Propane hose

Hi Tom,This from West Marine. Supply HosesTo carry the gas from the regulator to the stove or heater, use LPG supply hose of the correct length. Note that while these hoses are only carrying 0.5 psi, they have a 350 psi working pressure rating, so they are dramatically stronger than they have

Re: Stus-List Merry Christmas and Happy New Year

Ian, I am having a bag made from an old sail, also. The company is Sea Bags.  seabags.com/?utm_source=bing_medium=cpc_campaign=BR_Search_Brand_BING_term=sea bags_content=MswmwIqC|pcrid|80058229234124|pkw|sea bags|pmt|be|pdv|mDoug Mountjoy Sv Rebecca Leah LH39Port Orchard YC wa. Original

Re: Stus-List Merry Christmas and Happy New Year

Merry Christmas to all y'all from the wet Pacific Northwest.  Doug Mountjoy Sv Rebecca Leah LH39Port Orchard YC wa. null___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to

Re: Stus-List Heavy storms on the West Coast

Here in Port Orchard, West of Seattle, we had an EF-2 tornado touch down 2 miles from the yacht club. Reports from people at the club said winds were light with heavy rain. I was at the airport working. Just had power flicker. A few houses destroyed but no reported injuries. Doug Mountjoy Sv

Re: Stus-List Sailing Club with racers

Hi Charlie,At my club, we own buildings, and docks. Most members are powerboaters(170 boats). We have a committee (1 guy) that handles the racing. We set aside a portion of the annual budget for the racing. Members get work party time for helping out with the race committee boat. We also work

Re: Stus-List [EXTERNAL] Re: Westerbeke W33 Advice

Always better to go with a known quantity. Why replace a good engine for an annoying oil leak. While the engine is out I would freshen up the fuel injector pump and injectors, give the heat exchanger a thorough going over, and any other hard to service items. Doug Mountjoy Sv Rebecca Leah 

Re: Stus-List Westerbeke W33 Advice

From what I see in the picture, all you will need is a good quality torque wrench, and a Way to drive the seal into the seal plate. A good gasket scraper, some acetone or brake kleen to remove all oil residue from gasket surfaces. Locktight for sealing bolts. Some good quality gasket sealer for

Re: Stus-List Water Storage on 35-II & Drill Bit Set question

Hi Lee,Can't say much for the water, except that I'm storing some under my rudder quadrant. As for drill bits. I use cobalt bits. Little more expensive but last much longer. When drilling metal use slow speed and high pressure.  Cutting oil also helps.Missed you last weekend in Port Orchard.  

Stus-List Happy Thanksgiving

I want to wish everyone a safe and Happy Thanksgiving.  Doug Mountjoy Sv Rebecca Leah LH39Port Orchard YC wa.___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the

Re: Stus-List Engine oil

I use Delo 400 15-40. Doug Mountjoy Sv Rebecca Leah LH39Port Orchard YC wa. null___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send

Re: Stus-List C 35 mkiii mainsheet traveler

I just put on a Garhauer traveler. Called Guedio at Garhauer and he figured out the size I needed, plus matched existing mount bolt holes, and how and where lines would exit. All said and done it was still cheaper than repairing my 25 year old harken traveler. Doug Mountjoy Sv Rebecca Leah 

Re: Stus-List Charter Caribbean?

We have a boat reserved for mid January in the bvi. We'll see.  Doug Mountjoy  Sv Rebecca Leah LH39Port Orchard YC wa. Original message From: David Blair via CnC-List Date: 11/10/18 14:04 (GMT-08:00) To: cnc-list@cnc-list.com Cc: David Blair Subject: Stus-List Charter

Re: Stus-List Winch grease

I soaked my winch parts in Brakekleen. Came clean after 10 minutes soak time. I keep a spray can onboard for any oily cleaning I need to do. Doug Mountjoy Sv Rebecca Leah LH39Port Orchard YC wa. Original message From: Chris Graham via CnC-List Date: 11/4/18 05:49

Re: Stus-List engine oil filters and Car talk

Date: 11/3/18 10:26 (GMT-08:00) To: cnc-list@cnc-list.com Cc: Wade Glew Subject: Re: Stus-List engine oil filters and Car talk Will Napa be able to tell me which Wix filter will fit my 2GMF Yanmar?WadeOh Boy C 33 MKII  On Sat, Nov 3, 2018, 12:20 svrebeccaleah via CnC-List https

Re: Stus-List engine oil filters and Car talk

I second the vote for WIX available at your local NAPA store.  Doug Mountjoy Sv Rebecca Leah LH39Port Orchard YC wa. null___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to

Re: Stus-List cleaning off rust

New bolts. If their that rusty replace them. Cheap insurance.  Doug Mountjoy Sv Rebecca Leah LH39Port Orchard YC wa. Original message From: Bev Parslow via CnC-List Date: 11/3/18 09:20 (GMT-08:00) To: cnc-list@cnc-list.com Cc: Bev Parslow Subject: Stus-List cleaning off

Re: Stus-List painting with automotive paint.

A friend painted his boat with Imeron. Looks great after 7 years. Had to have is sprayed though. Most yards won't let you spray paint do to the overspray getting on neighbor boats. Doug Sent from my T-Mobile 4G LTE Device null___ Thanks everyone

Re: Stus-List diesel engine staring procedure

Hi Chris, On my girlfriend's boat, she has the same engine. When starting we set the throttle to about 1/4 to 1/3 then start cranking. Sometimes I'll engage the compression release to get the engine spinning a little faster (about 10 secs) then release it. Another thing we do is flush the

Re: Stus-List prpeller question

Bill,If I remember correctly.  On my LF38 I had a 17x12 2 blade and replaced it with a 17x12 3 blade (over propped). A 17x11 3 blade would be about right. I had a 3qm30 yanmar.  Doug MountjoySv Rebecca Leah LF39Port Orchard YC  Sent from my T-Mobile 4G LTE Device

Re: Stus-List Rob - C long time question

Don to update your spread sheet. I am in the Port Orchard YC port orchard WA. Have had Rebecca Leah 1.5 yrs. Been sailing 11 years, and boating 30. Came from the dark side in 2006.  Doug Mountjoy Sv Rebecca Leah LF39Port Orchard YC  Sent from my T-Mobile 4G LTE Device

Re: Stus-List Mold prevention

Dehumidifier. Like this one from Eva-Dry.  https://www.fisheriessupply.com/eva-dry-edv-2500-mid-size-dehumidifier-edv-2500 Getting ready to buy one myself the replace the big clunky one I currently have.  Doug MountjoySv Rebecca Leah LF39Port Orchard YC Sent from my T-Mobile 4G LTE Device

Re: Stus-List Catharsis message

I to feel you pain. I won't say have run aground, but I did not the Ballard railroad bridge when it was down just before I sold Pegasus my LF38. Not only do you have to watch but I guess the sky too. ;) After the pain and suffering and the boat is fixed, you have a great story for the next

Re: Stus-List Lazy Jacks

Glad to see the plug for Port Townsend Rigging. They are currently redoing my standing rigging, and goose neck. I also added a second sheave for another main halyard that will also work with a trisail. Dan and Lisa along with the rest of the staff are very knowledgeable. I am spending a month

Stus-List Mast paint

I am getting to repaint the mast on my 1988 LF39. Does anyone on here have a clue what paint C uses on their spars? The local chandlery suggested Interlux Brightside, not knowing what is currently on there. Any help would be appreciated. Thanks in advanceDoug Sent from my T-Mobile 4G LTE

Re: Stus-List 455 minutes at 25 amps...

If I remember my electrical schooling. (It's been a looong time) 455 ÷ 60 × 25 = 189.5 amp hours. Hours × amps = amp hours.  Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA. Original message From: David via CnC-List Date: 7/12/18 15:13 (GMT-08:00) To: CNC CNC Cc:

Re: Stus-List where to find a 3/4 to 1 1/8 inch hose adaptor

Wrap the 3/4 outlet with good 3m electrical tape til larger hose will just slide on. then put a hose clamp on. Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA. Original message From: Eric Frank via CnC-List Date: 7/11/18 14:16 (GMT-08:00) To: cnc-list@cnc-list.com

Re: Stus-List West Coast rendezvous

Not going to make it this year. Maybe next year.  Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA. Original message From: Lee Youngblood via CnC-List Date: 7/9/18 09:37 (GMT-08:00) To: CnC-List Cc: Lee Youngblood Subject: Re: Stus-List West Coast rendezvous August

Re: Stus-List VHB tape adhesion

Mark, When I did my windows I didn't use a primer, just stuck the tape (VHB4991) straight on the rough epoxy. You might try roughing up thr primer and wipe with copious amounts of acetone. One thing I learned is put the windows in when they are cool. The plexiglass expands in sunlight by quite

Re: Stus-List Deck fills for landfall 38.

John,What is the diameter of the holes in your deck? I am replacing all of my deck fills using the Seadog line on my LF39. 3 fuel, 2 water, and 2 waste.   http://www.sea-dog.com/search?utf8=✓_string=351321-1+=0=0 Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA  Original message

Re: Stus-List Steaming light guard

I thought the radar some was put there to protect the steaming light. Lol.  Doug Mountjoy Rebecca Leah LF39 POYC, WA. Original message From: Rod Stright via CnC-List Date: 6/28/18 16:56 (GMT-08:00) To: cnc-list@cnc-list.com Cc: Rod Stright Subject: Stus-List Steaming

Re: Stus-List checking fire extinguishers & Lifeslings

Eric,I just replaced some of my fire extinguishers. There was a year embossed on the bottom of mine. One was 88, another was 94. As long as the pressure is in the green, and weight is above minimum on label they are serviceable.(this is how we check the at the airline I work for).  I use a

Re: Stus-List recommendations for a small bilge pump

The water witch works in all types of water. Plus it will not work in oil or fuel.  Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA. Original message From: Marek Dziedzic via CnC-List Date: 6/22/18 11:02 (GMT-08:00) To: cnc-list@cnc-list.com Cc: Marek Dziedzic

Stus-List Ray marine autopilot

I need help. My Ray marine X30 autopilot has crapped out on me. Here is the historyLast cruise I noticed the heading was way off. I tried swinging the compass to no avail. Installed a new compass today. Now when I push the auto button I get "NO COMP". I also cannot access the dealer cal screen.

Re: Stus-List v berth sheets and mattress pads

I had a custom matters pad (came with my new matress), and found the custom sheets didn't work well on my LF38.  I used a king fitted sheet folded and tucked under matters, and a queen flat sheet for top tucked under as far as possible. Used full size blankets.  Doug Mountjoy Rebecca Leah 

Stus-List LF39 mast

Does anyone know it the rectangular plate under the mast of the LF39 is attached to the mast or does the mast just sit on it? Doesn't look like the plate will clear mast hole in deck.  Sent from my T-Mobile 4G LTE DeviceDoug Mountjoy Port Orchard YC Rebecca Leah 

Re: Stus-List 38 Landfall stemhead/ bow roller cracked

Paul, a friend had a stainless one made for his Pretorian (old one was stolen). I think he used 3/16 or 1/4 inch stainless plate, made a pattern from 1/4 plywood. Came out a work of art.  Doug Mountjoy Rebecca Leah LF39 POYC, WA. Original message From: Dreuge via CnC-List

Re: Stus-List LF39 mast removal

, svrebeccaleah via CnC-List wrote: Thanks Lloyd, looks to be what I need to do.I bought this boat a year ago and am still figuring it out. I would love to compare notes and pick your brain about the LF39.  Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA. Original message From: LKL

Re: Stus-List LF39 mast removal

arrangements on the 39, so hopefully we have the same layout and my comments apply.Hope all works out. Lloyd Lippe FinesseLF 39 Sent from my iPad On May 28, 2018, at 5:06 PM, svrebeccaleah via CnC-List wrote: Hi Lloyd,  Do you have to remove the table top and leaves? That's what it's looking like

Re: Stus-List LF39 mast removal

Subject: Re: Stus-List LF39 mast removal Hello Doug,If it is like mine, would suggest you removing the whole table. It really is not all that hard. Lloyd Lippe FinesseLF 39 Sent from my iPad On May 28, 2018, at 4:19 PM, svrebeccaleah via CnC-List wrote: I am getting ready to pull my mast

Stus-List LF39 mast removal

I am getting ready to pull my mast in July and am wondering how much of the table I need to dissamble. There is a bottle storage area fwd of the mast with slide out pieces fwd and aft of the cover. Any thoughts on this? Sent from my T-Mobile 4G LTE DeviceDoug Mountjoy Port Orchard YC Rebecca

Re: Stus-List thermostat on 3QM30H

Bill, my old 3qm30 had 2 thermostats. My understanding between the raw water cooled and fresh water cooled is the opening temperature of the thermostats. This was from my local Yanmar dealer.  Doug Mountjoy Rebecca Leah LF39 POYC, WA. Original message From: William Walker

Re: Stus-List Coupling bolts shearing

If bolts are coming loose. I would drill heads for safety wire. Install with Red lock tight and safety wire so the wire gets tighter when bolts loosen. I keep a can of 0.032 dua stainless safety wire on board comes in handy for all sorts of projects.  Doug Mountjoy Rebecca Leah LF39 POYC, WA.

Re: Stus-List Reading lines

ll correctly. Rick BrassWashington, NC   From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of svrebeccaleah via CnC-List Sent: Sunday, May 20, 2018 6:53 PM To: cnc-list@cnc-list.com Cc: svrebeccaleah <svrebeccal...@gmail.com> Subject: Stus-List Reading lines Looking for advice.

Stus-List Reading lines

Looking for advice. I need to replace the main reefing lines on my LF39. Currently I have for #1 reef pt is a 9/16 line and #2 &3 are 1/2 line, not sure of line type. Want something thinner and lighter. I don't race, just go cruising. Plan on a lot of offshore in near future. What are your

Re: Stus-List Anyone Have A Stack Pack?

I put one on my LF39 DUE to the center cockpit. It has a line at the mast that allows me to open and close it. Worth every penny. Mine is from Doyle.  Doug Mountjoy Rebecca Leah LF39 POYC, WA. Original message From: Edd Schillay via CnC-List Date:

Re: Stus-List Harken original roller furler parts

ecured with red Loctite).  Sorry.   With the exception of the foil pieces, I do have the other various screws.  Does that help?   From: svrebeccaleah via CnC-List Sent: Tuesday, May 15, 2018 7:40 PM To: cnc-list@cnc-list.com Cc: svrebeccaleah Subject: Re: Stus-List Harken original roller furler pa

Re: Stus-List Harken original roller furler parts

Matt, were your foils aka torque tube connections secures with rivets or screws? I need 6 screws for my old harken furler.  Doug Mountjoy Rebecca Leah LF39 POYC, WA. Original message From: "Matthew L. Wolford via CnC-List" Date: 5/15/18 10:42

Stus-List Barient winch parts

In cleaning and lubing my barient winches I found one with the self tailer tension screws broken. Does any one know where the might be found? I need minimum 2 screws and 2 springs for a 21ST. I haven't checked to see if they are the same size on all of my winches.  Sent from my T-Mobile 4G

Re: Stus-List Gold Stripe...

Looks good.  Doug Mountjoy Rebecca Leah LF39 POYC, WA. Original message From: "Dennis C. via CnC-List" Date: 5/13/18 10:34 (GMT-08:00) To: CnClist Cc: "Dennis C." Subject: Re: Stus-List Gold Stripe...

Re: Stus-List How do you tow your Dinghy and bring it aboard

Hi Dan,Having towed, and hauled a dinghy all over the Pacific NW. I can say that davits are the easiest. I use the spin halyard  for hoisting on deck for long passages.  For short towing I tow (without the motor) the dinghy pulled up close with the bow as far up on the mothership transom as

Re: Stus-List Battery CCA Rating for a "Cold" Diesel Engine

Edd, I would go with nothing less than 750 cca, space permitting.  The more the better. The bigger  battery will last longer. I am using a group 27 to start my Yanmar 4jhe44. I took out a 20 year old group 31 that was still working.  Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.

Re: Stus-List Fresh Water Conversion Yanmar 3HM

 Pegasus my old 38LF had been converted to fresh water cooling. Dont remember who made the heat exchanger. It used the cam driven vane pump (old raw water pump) as the recirculating pump. Replaced the impeller once in 10 years of ownership. Yes access did suck. Never had an issue of that pump

Re: Stus-List SHARX™ SCREWS FOR MARINE USE

I haven't heard of these but after a quick search they look like they would work great.  Doug Mountjoy Rebecca Leah LF39 POYC, WA. Original message From: Danny Haughey via CnC-List Date: 3/28/18 05:19 (GMT-08:00) To: cnc-list@cnc-list.com Cc: Danny

Re: Stus-List water heater

I installed an Isotherm in Pegasus and was very happy with it for 10 years I had the boat. Have an old Raritan in Rebecca Leah and not too impressed. From a live aboard stand point.  Doug Mountjoy Rebecca Leah LF39 POYC, WA. Original message From: Marek Dziedzic via CnC-List

Re: Stus-List Battery power

Fred, will the link 2000 work on a Prosine 2.5 inverter/charger?  Doug Mountjoy Rebecca Leah LF39 POYC  Sent from my T-Mobile 4G LTE Device Original message From: Frederick G Street via CnC-List Date: 2/12/18 12:39 (GMT-08:00) To:

Re: Stus-List Portable generator question

I use a Honda 2000i companion (has 30 amp plug) as a backup power source. At least until I get my solar up and running. The Honda is quiet and wind disturb neighbors in anchorage. I would Put the honda on the bow and not hear it in the cockpit. The 2000 will also power a hot water heater, or

Stus-List Batteries

When I bought Rebecca Leah in June I knew she needed new batteries, 6 group 31 agm's. The PO told me that the batteries were the same as when he bought her in 2003. Knowing I had to pull up the floor boards to easily access them I waited. Today I pulled out the old ones. They were west marine

Re: Stus-List C 37+ window replacement

The only thing can add (after doing 10 windows) is that the surface need to be flat and smooth, install and seal out of direct sunlight, minimum 3/16 gap for sealing, slight bevel on both sides of plexi ( more on tape side) outside just enough to remove sharp edge, and when sealing push sealant

Re: Stus-List Source for LDP Water Tank Inspection Port Caps & O-Rings?

Try marinesan.com, they are the local marine sanitation dealer here in Seattle.  Doug Mountjoy Rebecca Leah LF39 POYC, WA Sent from my T-Mobile 4G LTE Device Original message From: Bruce Whitmore via CnC-List Date: 2/5/18 18:47 (GMT-08:00) To: C List

Re: Stus-List insurance

I am with Red Sield $850 for $60k. This is also live aboard, think my deductible is $1000.  Doug Mountjoy Rebecca Leah LF39POYC, WA Sent from my T-Mobile 4G LTE Device Original message From: ahycrace ahycrace via CnC-List Date: 2/3/18 12:50