How do I get the top off?___
This List is provided by the CC Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Stick something long and skinny in the handle hole and push down as you pull up
on the winch body. If my 18s are the same this will work for you.
Brent D
27-5
Lake Winnipeg
Sent from my iPhone
On Jul 17, 2014, at 2:43 PM, Bev Parslow via CnC-List cnc-list@cnc-list.com
wrote:
How do I
carefully so as not to
damage it. Curved nose needle nose pliers may help.
Steve Thomas
CC27 MKIII
- Original Message -
From: Bev Parslow via CnC-List
To: cnc-list@cnc-list.com
Sent: Thursday, July 17, 2014 3:43 PM
Subject: Stus-List Barient 19 winch.
How do I get the top
If there are 2 holes in the top use your gas key.
Joel
On Thursday, July 17, 2014, Brent Driedger via CnC-List
cnc-list@cnc-list.com wrote:
Stick something long and skinny in the handle hole and push down as you
pull up on the winch body. If my 18s are the same this will work for you.
Bev - there's info on the photoalbum site:
http://www.cncphotoalbum.com/winches/bar19_2sp.htm
Wal
___
This List is provided by the CC Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go
Crowbar. Use a pad so you don't damage the coaming.
Jim Watts
Paradigm Shift
CC 35 Mk III
Victoria, BC
On 17 July 2014 14:07, Wally Bryant via CnC-List cnc-list@cnc-list.com
wrote:
Bev - there's info on the photoalbum site:
http://www.cncphotoalbum.com/winches/bar19_2sp.htm
Wal
Hey Jim!
Shouldn't you be cruisin' right now?... inna this weather!
I have an excuse to be here, since I'm still working for a living.
Cheers, Russ
At 10:05 PM 17/07/2014, you wrote:
Crowbar. Use a pad so you don't damage the coaming.
Jim Watts
Paradigm Shift
CC 35 Mk III
Victoria,
