Re: Stus-List CC 26 Prop Zinc
You have to keep in mind zinc is for salty waters, for fresh water you need to use magnesium or at least cast aluminum. Merry Christmas to all. Yanni Boatless in Ontario Not for long… 92 Lebaron 3.0 convertible 95 LeBaron 3.0 turbo convertible 90 Dodge Spirit soon to be turbo 07 Yamaha Straotoliner S SCRC 011059 SRO 26-6483 TURBO!cause bottles are for babies and superchargers blow!!! Which would you rather have, go fast goodies or shiny shoes? Your feet may look good but if your engine blows you ain't going nowhere From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Sam Salter via CnC-List Sent: December 24, 2014 11:06 AM To: CnC Subject: Re: Stus-List CC 26 Prop Zinc My zincs are spherical with a 7/8 hole. Yours may have a different shaft size so check. They are available at any chandlery. If you have to replace the prop, this might be the time to upgrade to a folder. I recently replaced mine with a 2 blade Flexofold. Better speed under sail in light air, improved reverse thrust. Not cheap, but if you have to replace anyway, you're partway there anyway. My shaft is 7/8 with an SAE standard taper for the prop. sam :-) CC 26 Liquorice Ghost Lake Alberta From: Dan via CnC-List Sent: Wednesday, December 24, 2014 8:17 AM To: CnC-List@cnc-list.com mailto:CnC-List@cnc-list.com Reply To: Dan Subject: Stus-List CC 26 Prop Zinc Diver who cleaned the hull of my CC says I need to change out the zinc and replace the prop. The prop had buildup and while clean now has the residue that will enhance further growth. The since is just normal wear and need replacing. Anyone have any idea where to find both the prop and zinc? Merry Christmas Everyone!! Dan ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List CC 26 Prop Zinc
I was using "zincs" as a collective noun.Magnesiums or Aluminums doesn't trip off the to tongue like "zincs ". sam :-) From: Letsgo SailingSent: Thursday, December 25, 2014 9:45 AMTo: sam.c.sal...@gmail.com; cnc-list@cnc-list.comSubject: RE: Stus-List CC 26 Prop ZincYou have to keep in mind zinc is for salty waters, for fresh water you need to use magnesium or at least cast aluminum.Merry Christmas to all.Yanni Boatless in OntarioNot for long…92 Lebaron 3.0 convertible95 LeBaron 3.0 turbo convertible90 Dodge Spirit soon to be turbo07 Yamaha Straotoliner SSCRC 011059SRO 26-6483TURBO!cause bottles are for babies and superchargers blow!!!Which would you rather have, go fast goodies or shiny shoes?Your feet may look good but if your engine blows you ain't going nowhereFrom: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Sam Salter via CnC-ListSent: December 24, 2014 11:06 AMTo: CnCSubject: Re: Stus-List CC 26 Prop ZincMy zincs are spherical with a 7/8" hole. Yours may have a different shaft size so check.They are available at any chandlery.If you have to replace the prop, this might be the time to upgrade to a folder. I recently replaced mine with a 2 blade Flexofold. Better speed under sail in light air, improved reverse thrust. Not cheap, but if you have to replace anyway, you're partway there anyway. My shaft is 7/8" with an SAE standard taper for the prop.sam :-)CC 26 LiquoriceGhost Lake AlbertaFrom: Dan via CnC-ListSent: Wednesday, December 24, 2014 8:17 AMTo: CnC-List@cnc-list.comReply To: DanSubject: Stus-List CC 26 Prop ZincDiver who cleaned the hull of my CC says I need to change out the zinc and replace the prop. The prop had buildup and while clean now has the residue that will enhance further growth. The since is just normal wear and need replacing. Anyone have any idea where to find both the prop and zinc?Merry Christmas Everyone!!Dan ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List CC 26 Prop Zinc
interestingly, magnesium anodes are much more difficult to find, even in the chandleries serving fresh water sailing From: Sam Salter via CnC-List Sent: Thursday, December 25, 2014 2:02 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List CC 26 Prop Zinc I was using zincs as a collective noun.Magnesiums or Aluminums doesn't trip off the to tongue like zincs . sam :-) From: Letsgo Sailing Sent: Thursday, December 25, 2014 9:45 AM To: sam.c.sal...@gmail.com; cnc-list@cnc-list.com Subject: RE: Stus-List CC 26 Prop Zinc You have to keep in mind zinc is for salty waters, for fresh water you need to use magnesium or at least cast aluminum. Merry Christmas to all. Yanni Boatless in Ontario Not for long… 92 Lebaron 3.0 convertible 95 LeBaron 3.0 turbo convertible 90 Dodge Spirit soon to be turbo 07 Yamaha Straotoliner S SCRC 011059 SRO 26-6483 TURBO!cause bottles are for babies and superchargers blow!!! Which would you rather have, go fast goodies or shiny shoes? Your feet may look good but if your engine blows you ain't going nowhere From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Sam Salter via CnC-List Sent: December 24, 2014 11:06 AM To: CnC Subject: Re: Stus-List CC 26 Prop Zinc My zincs are spherical with a 7/8 hole. Yours may have a different shaft size so check. They are available at any chandlery. If you have to replace the prop, this might be the time to upgrade to a folder. I recently replaced mine with a 2 blade Flexofold. Better speed under sail in light air, improved reverse thrust. Not cheap, but if you have to replace anyway, you're partway there anyway. My shaft is 7/8 with an SAE standard taper for the prop. sam :-) CC 26 Liquorice Ghost Lake Alberta From: Dan via CnC-List Sent: Wednesday, December 24, 2014 8:17 AM To: CnC-List@cnc-list.com Reply To: Dan Subject: Stus-List CC 26 Prop Zinc Diver who cleaned the hull of my CC says I need to change out the zinc and replace the prop. The prop had buildup and while clean now has the residue that will enhance further growth. The since is just normal wear and need replacing. Anyone have any idea where to find both the prop and zinc? Merry Christmas Everyone!! Dan ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List CC 26 Prop Zinc
Not hard to find here. http://www.boatzincs.com/shaft-magnesium.html On Dec 25, 2014 2:56 PM, Marek Dziedzic via CnC-List cnc-list@cnc-list.com wrote: interestingly, magnesium anodes are much more difficult to find, even in the chandleries serving fresh water sailing *From:* Sam Salter via CnC-List cnc-list@cnc-list.com *Sent:* Thursday, December 25, 2014 2:02 PM *To:* cnc-list@cnc-list.com *Subject:* Re: Stus-List CC 26 Prop Zinc I was using zincs as a collective noun. Magnesiums or Aluminums doesn't trip off the to tongue like zincs . sam :-) *From: *Letsgo Sailing *Sent: *Thursday, December 25, 2014 9:45 AM *To: *sam.c.sal...@gmail.com; cnc-list@cnc-list.com *Subject: *RE: Stus-List CC 26 Prop Zinc You have to keep in mind zinc is for salty waters, for fresh water you need to use magnesium or at least cast aluminum. Merry Christmas to all. Yanni Boatless in Ontario Not for long... 92 Lebaron 3.0 convertible 95 LeBaron 3.0 turbo convertible 90 Dodge Spirit soon to be turbo 07 Yamaha Straotoliner S SCRC 011059 SRO 26-6483 TURBO!cause bottles are for babies and superchargers blow!!! Which would you rather have, go fast goodies or shiny shoes? Your feet may look good but if your engine blows you ain't going nowhere *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Sam Salter via CnC-List *Sent:* December 24, 2014 11:06 AM *To:* CnC *Subject:* Re: Stus-List CC 26 Prop Zinc My zincs are spherical with a 7/8 hole. Yours may have a different shaft size so check. They are available at any chandlery. If you have to replace the prop, this might be the time to upgrade to a folder. I recently replaced mine with a 2 blade Flexofold. Better speed under sail in light air, improved reverse thrust. Not cheap, but if you have to replace anyway, you're partway there anyway. My shaft is 7/8 with an SAE standard taper for the prop. sam :-) CC 26 Liquorice Ghost Lake Alberta *From: *Dan via CnC-List *Sent: *Wednesday, December 24, 2014 8:17 AM *To: *CnC-List@cnc-list.com *Reply To: *Dan *Subject: *Stus-List CC 26 Prop Zinc Diver who cleaned the hull of my CC says I need to change out the zinc and replace the prop. The prop had buildup and while clean now has the residue that will enhance further growth. The since is just normal wear and need replacing. Anyone have any idea where to find both the prop and zinc? Merry Christmas Everyone!! Dan -- ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Stus-List CC 26 Prop Zinc
Diver who cleaned the hull of my CC says I need to change out the zinc and replace the prop. The prop had buildup and while clean now has the residue that will enhance further growth. The since is just normal wear and need replacing. Anyone have any idea where to find both the prop and zinc? Merry Christmas Everyone!! Dan ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List CC 26 Prop Zinc
Dan, you can get the Zinc get any chandlery. You need to know the shaft size. Wildcats would be three-quarter inch. The prop just needs to be cleaned well. There is no reason to spend hundreds of dollars on A new one On Wednesday, December 24, 2014, Dan via CnC-List cnc-list@cnc-list.com wrote: Diver who cleaned the hull of my CC says I need to change out the zinc and replace the prop. The prop had buildup and while clean now has the residue that will enhance further growth. The since is just normal wear and need replacing. Anyone have any idea where to find both the prop and zinc? Merry Christmas Everyone!! Dan -- Joel 301 541 8551 ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List CC 26 Prop Zinc
Lots of prop choices. Are you looking for a like for like replacement or are you using this as an opportunity to upgrade? I recommend an upgrade to a 3 blade feathering/folding prop. The zinc can be found anywhere. West Marine, Defender, etc. You need to know the shaft diameter. Boatzincs.com is one option that will give options on aluminum, magnesium, and zinc alloy variants. They also explain why you should use one over another. If you don't know the shaft size then use calipers on the inside of the boat to measure the shaft near the stuffing box. Josh Muckley S/V Sea Hawk 1989 CC 37+ Solomons, MD On Dec 24, 2014 10:17 AM, Dan via CnC-List cnc-list@cnc-list.com wrote: Diver who cleaned the hull of my CC says I need to change out the zinc and replace the prop. The prop had buildup and while clean now has the residue that will enhance further growth. The since is just normal wear and need replacing. Anyone have any idea where to find both the prop and zinc? Merry Christmas Everyone!! Dan ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List CC 26 Prop Zinc
Why not just remove the prop and buff it clean? As long as the zinc is not eaten away from the bronze – the prop will be pinkish -- it should be fine. Jack Brennan Former CC 25 Shanachie, 1974 Bristol 30 Tierra Verde, Fl. From: Dan via CnC-List Sent: Wednesday, December 24, 2014 10:17 AM To: CnC-List@cnc-list.com Subject: Stus-List CC 26 Prop Zinc Diver who cleaned the hull of my CC says I need to change out the zinc and replace the prop. The prop had buildup and while clean now has the residue that will enhance further growth. The since is just normal wear and need replacing. Anyone have any idea where to find both the prop and zinc? Merry Christmas Everyone!! Dan ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List CC 26 Prop Zinc
My zincs are spherical with a 7/8" hole. Yours may have a different shaft size so check.They are available at any chandlery.If you have to replace the prop, this might be the time to upgrade to a folder. I recently replaced mine with a 2 blade Flexofold. Better speed under sail in light air, improved reverse thrust. Not cheap, but if you have to replace anyway, you're partway there anyway. My shaft is 7/8" with an SAE standard taper for the prop. sam :-)CC 26 LiquoriceGhost Lake Alberta From: Dan via CnC-ListSent: Wednesday, December 24, 2014 8:17 AMTo: CnC-List@cnc-list.comReply To: DanSubject: Stus-List CC 26 Prop Zinc Diver who cleaned the hull of my CC says I need to change out the zinc and replace the prop. The prop had buildup and while clean now has the residue that will enhance further growth. The since is just normal wear and need replacing. Anyone have any idea where to find both the prop and zinc?Merry Christmas Everyone!! Dan ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List CC 26 Prop Zinc
If a diver is telling you to replace a prop which just has some build-up on it, replace the diver. Like this letter says, take it off and buff it out. I use emery cloth or sandpaper. Unless it is corroded to the point of falling apart, it can be cleaned forever. Gary - Original Message - From: Sam Salter via CnC-List To: CnC Sent: Wednesday, December 24, 2014 11:06 AM Subject: Re: Stus-List CC 26 Prop Zinc My zincs are spherical with a 7/8 hole. Yours may have a different shaft size so check. They are available at any chandlery. If you have to replace the prop, this might be the time to upgrade to a folder. I recently replaced mine with a 2 blade Flexofold. Better speed under sail in light air, improved reverse thrust. Not cheap, but if you have to replace anyway, you're partway there anyway. My shaft is 7/8 with an SAE standard taper for the prop. sam :-) CC 26 Liquorice Ghost Lake Alberta From: Dan via CnC-List Sent: Wednesday, December 24, 2014 8:17 AM To: CnC-List@cnc-list.com Reply To: Dan Subject: Stus-List CC 26 Prop Zinc Diver who cleaned the hull of my CC says I need to change out the zinc and replace the prop. The prop had buildup and while clean now has the residue that will enhance further growth. The since is just normal wear and need replacing. Anyone have any idea where to find both the prop and zinc? Merry Christmas Everyone!! Dan -- ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com -- ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com