igging, and lack
of stretch in the Rod.
John
LF38
From: Mack McKinney [mailto:m...@woodnboats.com]
Sent: August-11-17 5:36 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Can't close the v-berth door
We had a similar, although not precisely the same, problem with ou
We had a similar, although not precisely the same, problem with our C
30 several years ago. We found that when the rig was in racing tune,
the head door would not close properly, and would often launch itself in
an unwanted attempt to close itself at high velocity whenever we were on
a port
I wouldn't say that's the opposite problem, that's the same as my
situation. Maybe you were referencing a couple of the other posts though
where they had the frame/door issue at the top/bottom edges.
My feeling is it doesn't indicate a serious issue, but you should check
bulkheads and rig just to
Hi all,
(Cheers, I'm new to the list - I got a 1980 C 36 a year ago in May and
have been sailing and fixing/improving her since. Calling from Helsinki,
Finland.)
It's kinda funny, I have an opposite problem. The V-berth door doesn't
close when the shrouds are tightened, but that's because the
rd <johnsandf...@eastlink.ca>
> To: "'Patrick Davin'" <jda...@gmail.com>, cnc-list@cnc-list.com
> Cc:
> Bcc:
> Date: Thu, 10 Aug 2017 18:33:27 -0300
> Subject: Re: Stus-List Can't close the v-berth door
>
> I have the same problem when the shrouds are tensioned t
Rats, sorry about my reply in the subject line. My Samsung galaxy pulled a fast
one on me.
Mike Amirault
C Lovely cruise___
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs,
Sent from my Samsung Galaxy smartphone.___
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly
And the boat's in the cradle and the silver cup
Little boat blue and the man drinking up
When you going sailing, Fred?
I don't know when
But we'll get together then
You know we'll have a good time then
Sorry, it's just where my mind went.
Dennis C.
On Thu, Aug 10, 2017 at 5:00 PM, Frederick G
I’m thinking that this might be a common issue along the C line, at least
from our vintage years. About a year after I acquired our boat and getting the
rig rebuilt (I bought it with the mast on the deck as an abandoned bank-repo)
and the boat in the water the v-berth door stopped closing.
eck tie downs allows the hull to flex
> more at that fwd section.
>
> -Patrick
>
>> -- Forwarded message --
>> From: "Dennis C." <capt...@gmail.com>
>> To: CnClist <cnc-list@cnc-list.com>
>> Cc:
>> Bcc:
>> Dat
I have the opposite issue with the v-berth door on my Landfall 38; with the
boat in the water and the rig under tension, it’s fine, but when the boat’s in
the cradle for the winter it won’t close… Kind of a non-issue, I guess… :^)
— Fred
Fred Street -- Minneapolis
S/V Oceanis (1979 C
f just flopping around. So I dont
From: Patrick Davin [mailto:jda...@gmail.com]
Sent: August-10-17 3:44 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Can't close the v-berth door
I've had this (minor) issue over a year where we can't fully close the v-berth
door on our Landfall 38.
At
.@gmail.com>
>> To: CnClist <cnc-list@cnc-list.com>
>> Cc:
>> Bcc:
>> Date: Thu, 10 Aug 2017 14:08:47 -0500
>> Subject: Re: Stus-List Can't close the v-berth door
>> Years ago, I installed a hydraulic backstay adjuster on Touche'. Hot
>> dog! P
: Patrick Davin via CnC-List
<cnc-list@cnc-list.com> Date: 8/10/17 13:18 (GMT-08:00) To:
cnc-list@cnc-list.com Cc: Patrick Davin <jda...@gmail.com> Subject: Re:
Stus-List Can't close the v-berth door
Interesting. I inspected my mast step closely when the mast was out, since I
kno
To: CnClist <cnc-list@cnc-list.com>
> Cc:
> Bcc:
> Date: Thu, 10 Aug 2017 14:08:47 -0500
> Subject: Re: Stus-List Can't close the v-berth door
> Years ago, I installed a hydraulic backstay adjuster on Touche'. Hot
> dog! Picked the boat up from the yard and went out on the
Years ago, I installed a hydraulic backstay adjuster on Touche'. Hot dog!
Picked the boat up from the yard and went out on the lake to try it out.
Cranked it down and, oops, the head door wouldn't open. Temporary boat
rule: nobody uses the head going upwind. Downwind, backstay off, door
opened
I've had this (minor) issue over a year where we can't fully close the
v-berth door on our Landfall 38.
At first I thought it was just due to heat expansion of the wood in the
summer, but it started roughly after I tightened the main shrouds a couple
turns (due to masthead fall off in higher
17 matches
Mail list logo
