Hello all,
For those of you with aluminum goosenecks like ours, I took the suggestion
from Joel and Graham, and found bronze bushings at our local ACE hardware.
I then drilled out the 1/2" hole to 5/8", and pressed in the bushing. One
bushing was a tiny bit loose in the aluminum, so I mixed up so
Hello all,
Our gooseneck fitting is starting to wear, and the holes in it where the
bolt fits down the center vertically are starting to wear egg-shaped. You
can see a photo here:
https://www.dropbox.com/s/re5kalfn9slfidr/Gooseneck%20Fitting.jpg?dl=0
Does anyone know where to get a new fitting?
;Take Five"
Lake Lanier, GA
> Message: 1
> Date: Tue, 15 Mar 2016 18:56:17 -0400
> From: Josh Muckley
> To: "C&C List"
> Subject: Re: Stus-List Gooseneck fitting
> Message-ID:
>
> Content-Type: text/plain; charset="utf-8"
>
>
FYI my bolt was too short on the unthreaded portion and the threaded
portion wore into the lower mast fitting.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Mar 12, 2016 12:22 PM, "Alan Liles via CnC-List"
wrote:
> Preparing to remove my rig, I found the gooseneck fitting (toggle?) worn
CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alan
Liles via CnC-List
Sent: Saturday, March 12, 2016 12:22 PM
To: Stuslist
Cc: Alan Liles
Subject: Stus-List Gooseneck fitting
Preparing to remove my rig, I found the gooseneck fitting (toggle?) worn
around the vertical pin. Where m
I suggest check with Offshore spars, they are probably the manufacturer and
have spare parts.
Bruno lachance
Becassine
33 mk II 87
New Richmond, Qc
Envoyé de mon iPad
> Le 12 mars 2016 à 12:22, Alan Liles via CnC-List a
> écrit :
>
> Preparing to remove my rig, I found the gooseneck fitting
-list@cnc-list.com
Cc: Alan Liles
Subject: Re: Stus-List Gooseneck fitting - now searching cnc list archives
I am amazed at how well this list works. Thanks to everyone who helps out.
Cheers, Al
On Mar 12, 2016, at 11:59 AM, Dennis C. via CnC-List
wrote:
Two methods.
1. Go here and
I am amazed at how well this list works. Thanks to everyone who helps out.
Cheers, Al
> On Mar 12, 2016, at 11:59 AM, Dennis C. via CnC-List
> wrote:
>
> Two methods.
>
> 1. Go here and enter your search string in the search window at the top:
> https://www.mail-archive.com/cnc-list@cnc-l
Two methods.
1. Go here and enter your search string in the search window at the top:
https://www.mail-archive.com/cnc-list@cnc-list.com/
2. Go to google and enter "cnc-list.com" plus your search string. For
example, if you want posts about a rudder, enter "cnc-list.com rudder".
Dennis C.
On
Rig-Rite NY
Do a search!
sam :-)
Original Message
From: Alan Liles via CnC-List
Sent: Saturday, March 12, 2016 10:22 AM
To: Stuslist
Reply To: cnc-list@cnc-list.com
Cc: Alan Liles
Subject: Stus-List Gooseneck fitting
Preparing to remove my rig, I found the gooseneck fitting (toggle?) worn
-Original Message-
From: Alan Liles via CnC-List
To: Stuslist
Cc: Alan Liles
Sent: Sat, Mar 12, 2016 12:22 pm
Subject: Stus-List Gooseneck fitting
Preparing to remove my rig, I found the gooseneck fitting (toggle?) worn around
the vertical pin. Where might I source a new one. The boat
Preparing to remove my rig, I found the gooseneck fitting (toggle?) worn around
the vertical pin. Where might I source a new one. The boat is a '94 37/40+. I'm
not sure of the manufacturer.
On another note, is there a way to search subjects in the list archive? I'm
sure this has come up before
12 matches
Mail list logo