Jim
I had the same issue. I cut the 2 pieces in two ensuring the cuts were offset.
Then I epoxied everything in place.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On May 29, 2017, at 2:10 PM, Jim Watts via CnC-List
> wrote:
>
> Josh, I also discovered that I couldn't get
Actually, I installed a Tigres Lofrans on a 35 MkII. That's a horizontal
windlass. The installation isn't completely finished, as it still needs
wiring. Because I wanted to include a lot of chain, I have a PVC pipe
receiving the chain and leading it back to v-berth lockers. I also
included
Josh, I also discovered that I couldn't get the full-width shelf into the
locker, so I tabbed supports to either side and bolted the shelf to those.
The angled insert gives the right entry angle for the chain to the
windlass. http://imgur.com/HHLi2nR.jpg
Jim Watts
Paradigm Shift
C 35 Mk III
not recommend it
>
> John and Maryann
> Legacy III
> 1982 C 34
> Noank, CT
> -Original Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of DON
> JONSSON via CnC-List
> Sent: Saturday, May 27, 2017 11:47 PM
> To: cnc-list@cnc-list.com
>
> >
>> > John and Maryann
>> > Legacy III
>> > 1982 C 34
>> > Noank, CT
>> > -Original Message-
>> > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of DON
>> > JONSSON via CnC-List
>> > Sent
t;> > Legacy III
>> > 1982 C 34
>> > Noank, CT
>> > -Original Message-
>> > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of DON
>> > JONSSON via CnC-List
>> > Sent: Saturday, May 27, 2017 11:47 PM
>> > To
>
>> > John and Maryann
>> > Legacy III
>> > 1982 C 34
>> > Noank, CT
>> > -Original Message-
>> > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of DON
>> > JONSSON via CnC-List
>> > Sent: Saturday,
edge of the chain locker. As I recall, the aft section of the locker cover
>> > was cut off to accommodate. Would not recommend it
>> >
>> > John and Maryann
>> > Legacy III
>> > 1982 C 34
>> > Noank, CT
>> > -Original Message-
>> >
34
> > Noank, CT
> > -Original Message-
> > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of DON
> > JONSSON via CnC-List
> > Sent: Saturday, May 27, 2017 11:47 PM
> > To: cnc-list@cnc-list.com
> > Cc: DON JONSSON
> > Subject:
t; Legacy III
> 1982 C 34
> Noank, CT
> -Original Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of DON
> JONSSON via CnC-List
> Sent: Saturday, May 27, 2017 11:47 PM
> To: cnc-list@cnc-list.com
> Cc: DON JONSSON
> Subject: Stus-List
-List One more kick at windlass for C 34
Hi All
I asked before if anyone has an electric windlass on a C 34. Although I
got great advice no pictures of one mounted on a 34. I'm hoping someone out
there has a C 34 with an electric windlass that they think has been set up
well and could either
Hi All
I asked before if anyone has an electric windlass on a C 34. Although I got
great advice no pictures of one mounted on a 34. I'm hoping someone out there
has a C 34 with an electric windlass that they think has been set up well and
could either provide a description of where it is or
12 matches
Mail list logo