age-
> From: Andy Frame via CnC-List
> To: cnc-list@cnc-list.com
> Cc: Andy Frame
> Sent: Sat, May 28, 2022 4:26 pm
> Subject: Stus-List Re: Antenna cable woes
>
>
> Where is the cut?
>
> On 5/28/2022 12:07 PM, Charlie Nelson via CnC-Li
at our club take down mast every year and
> are set up this way. Basically same connector as at radio and antenna ends
> of the cable with a barrel connector
>
>
>
> *From:* Charlie Nelson via CnC-List
> *Sent:* May 28, 2022 7:27 PM
> *To:* cnc-list@cnc-list.com
> *Cc:
Coleman
Entrada, Erie, PA
From: cenelson--- via CnC-List [mailto:cnc-list@cnc-list.com]
Sent: Monday, May 30, 2022 9:44 AM
To: Hoyt, Mike; Stus-List
Cc: cenel...@aim.com
Subject: Stus-List Re: Antenna cable woes
A great idea although my mast is not routinely removed—twice since new
@cnc-list.com
Cc: cenel...@aol.com
Subject: Stus-List Re: Antenna cable woes
About 8" from where it enters the bottom of the mast in the bilge (dry). Except
for working on my old knees and removing part of the sole, it is reachable. I
have not found the other end that goes to the radio
-List
Sent: May 28, 2022 7:27 PM
To: cnc-list@cnc-list.com
Cc: cenel...@aol.com
Subject: Stus-List Re: Antenna cable woes
About 8" from where it enters the bottom of the mast in the bilge (dry). Except
for working on my old knees and removing part of the sole, it is reachable. I
have not
AMEN!!
Neil Andersen, W3NEA
Rock Hall, MD 21661
484-354-8800
From: Joe Della Barba via CnC-List
Sent: Sunday, May 29, 2022 9:43:04 AM
To: 'Stus-List'
Cc: j...@dellabarba.com
Subject: Stus-List Re: Antenna cable woes
THIS is the correct answer, he who cut
fix it!
>
> Joe
>
> *From:* Josh Muckley via CnC-List
> *Sent:* Saturday, May 28, 2022 10:47 PM
> *To:* Stus-List
> *Cc:* Josh Muckley
> *Subject:* Stus-List Re: Antenna cable woes
>
> Lots of options. You could terminate the 2 ends with the typical connectors
> a
THIS is the correct answer, he who cut it can fix it!
Joe
From: Josh Muckley via CnC-List
Sent: Saturday, May 28, 2022 10:47 PM
To: Stus-List
Cc: Josh Muckley
Subject: Stus-List Re: Antenna cable woes
Lots of options. You could terminate the 2 ends with the typical connectors
Lots of options. You could terminate the 2 ends with the typical
connectors and then use a joiner. You could use you're splicer. Nothing
will ever be as good as the cable was before it was cut. I'd ask the yard
to replace the cable. Period. They broke it, they should fix it...
Correctly.
ut I
> suspect it is hidden under the sole that I must remove to see/find it.
>
> Charlie
>
>
> -Original Message-
> From: Andy Frame via CnC-List
> To: cnc-list@cnc-list.com
> Cc: Andy Frame
> Sent: Sat, May 28, 2022 4:26 pm
> Subject: Stus-List Re: Antenna
arlie
-Original Message-
From: Andy Frame via CnC-List
To: cnc-list@cnc-list.com
Cc: Andy Frame
Sent: Sat, May 28, 2022 4:26 pm
Subject: Stus-List Re: Antenna cable woes
Where is the cut?
On 5/28/2022 12:07 PM, Charlie Nelson via CnC-List wrote:
> The yard that removed my mast to
Where is the cut?
On 5/28/2022 12:07 PM, Charlie Nelson via CnC-List wrote:
> The yard that removed my mast to replace the rod rigging just cut the
> mast antenna cable and so I either have to have another cable run or
> 'splice' the current cable using one of the Sheakspeare fittings that
>
I have used the Shakespeare connectors. If you make SURE you do not put them on
crooked and short the coax they work fine.
Joe Della Barba
Coquina C 35 MK I
Kent Island MD USA
From: Charlie Nelson via CnC-List
Sent: Saturday, May 28, 2022 12:07 PM
To: cnc-list@cnc-list.com
Cc:
13 matches
Mail list logo
