I will bet that Garhauer would do it as well. I had them custom fabricate a
set of stainless steel bow chocks for my boat last winter and they were great
and relatively inexpensive compared to what I thought it would cost. Dave
On Jul 30, 2014, at 10:44 PM, Dennis C. via CnC-List
wrote:
> S
Steve,
The guys at http://www.whitewatermarineinc.com/ can do both but South Shore
may be a better bet for the stanchion.
Walk down your pier to the J30 "Jalapeno" and look at the SS handrails on
it. I had whitewater make those for me to install. Sent them the old teak
ones for a pattern.
Denn
ll
> that stuff hanging on the end of itI guess the list moderator was
> asleep
> at the switch..
>
>
>
>
>
> -Original Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com ] On
> Behalf Of Stephen
> Thorne via CnC-List
> Sent: Wednesday, July 30,
To: cnc-list@cnc-list.com
Subject: Stus-List Stainless Grab Rails & New Stanchion
Guys,
I need to replace on of my stanchions which got bent in a not so sexy
departure from a dock recently. Any ideas where I can source stanchions
same as my 1990 34+?
Also I am interested in replacing t
Steve - Umm, you accidentally attached about two weeks of old emails
onto your message.
You might be able to repair that stanchion, depending on how bad it's
bent. I've been hit by a few big powerboats (with Mexican captains who
think all boats are like fishing pangas and a collision is fu
Steve,
Check with South Shore http://southshoreyachts.com , Rob has most parts ...
Sent from my iPad
> On Jul 30, 2014, at 3:01 PM, "Stephen Thorne via CnC-List"
> wrote:
>
>
>
>
> Guys,
>
> I need to replace on of my stanchions which got bent in a not so sexy
> departure from a dock rec
Guys,
I need to replace on of my stanchions which got bent in a not so sexy departure
from a dock recently. Any ideas where I can source stanchions same as my 1990
34+?
Also I am interested in replacing the old teak grab rails with a stainless rail
and wanted to know if anyone has done thi
