;CNC boat owners, cnc-list"
Sent: Saturday, July 12, 2014 10:41:05 PM
Subject: Re: Stus-List Stanchion inserts
How about those heat shrink tubes over the line at the stanchions?
Ron
Wild Cheri
C&C 30-1
STL
On Sat, 7/12/14, Dennis C. via CnC
I finally located inserts to fit the middle hole in lifeline stanchions.
Some of mine are gone leaving a rough edged hole in the metal.
They're Heyco SB-437-5 snap bushings. Heyco part number 2044 (white) and
2043 (black) . The specs are:
Mounting hole size: 0.437 inches (7/16)
Inside diameter:
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ronald B.
Frerker via CnC-List
Sent: July 12, 2014 11:41 PM
To: Dennis C.; cnc-list@cnc-list.com
Subject: Re: Stus-List Stanchion inserts
How about those heat shrink tubes over the line at the stanchions?
Ron
Wild Cheri
C&C 30-1
How about those heat shrink tubes over the line at the stanchions?
Ron
Wild Cheri
C&C 30-1
STL
On Sat, 7/12/14, Dennis C. via CnC-List wrote:
Subject: Stus-List Stanchion inserts
To: "CnClist"
Date: Saturday, July 12, 2014, 12:59
76 C&C 38
> Oriental, NC
>
> - Original Message -
> *From:* Dennis C. via CnC-List
>
> *To:* CnClist
> *Sent:* Saturday, July 12, 2014 1:59 PM
> *Subject:* Stus-List Stanchion inserts
>
> Speaking of making sure the holes in the stanchions are smooth so t
I think I saw them in the CS Johnson catalog, but have no idea where to buy
them from.
James
Delaney
1976 C&C 38
Oriental, NC
- Original Message -
From: Dennis C. via CnC-List
To: CnClist
Sent: Saturday, July 12, 2014 1:59 PM
Subject: Stus-List Stanchion inserts
Spea
Hi Dennis,
I made tapered S/S stanchions, using sched 40
pipe, on a previous boat and formed chafe inserts out of copper tubing.
I flared one end with a tool, cut to length,
insert in stanchion hole and flare other end with
a centre punch (you may have to use a center
punch though :), then
Speaking of making sure the holes in the stanchions are smooth so the
lifelines don't get chafed, anybody know where to get those little plastic
inserts or come up with a good solution for this? Like flared SS tubing,
etc.?
Dennis C.
Touche' 35-1 #83
Mandeville, LA
___
