I traced the wire yesterday, and it does not look like there is a solenoid for
the glow plugs. I will have to think about adding one (perhaps when I remove
the connector this winter). Dave
On Aug 17, 2015, at 1:06 AM, Josh Muckley via CnC-List cnc-list@cnc-list.com
wrote:
Thanks for
-list@cnc-list.com
*Cc: *David Knecht davidakne...@gmail.com
*Sent: *Thursday, August 20, 2015 1:02:38 PM
*Subject: *Re: Stus-List Universal Engine panel wiring- Problem Solved!
I traced the wire yesterday, and it does not look like there is a solenoid
for the glow plugs. I will have to think
cnc-list@cnc-list.com
To: CnC CnC discussion list cnc-list@cnc-list.com
Cc: David Knecht davidakne...@gmail.com
Sent: Thursday, August 20, 2015 1:02:38 PM
Subject: Re: Stus-List Universal Engine panel wiring- Problem Solved!
I traced the wire yesterday, and it does not look like
On Aug 17, 2015, at 1:06 AM, Josh Muckley via CnC-List cnc-list@cnc-list.com
wrote:
Thanks for letting us know what you found. I'm still curious to know if you
have a glo-plug solenoid.
There is certainly none indicated in the wiring diagram from Universal, but to
be fair, the starter
...@gmail.com
To: CC List cnc-list@cnc-list.com
Subject: Re: Stus-List Universal Engine panel wiring- Problem Solved!
Message-ID:
CA+zaCRBoNCn=eGtKFXTOD7By2eJC4jriBjHwKTjOE1=flrv...@mail.gmail.com
Content-Type: text/plain; charset=utf-8
Thanks for letting us know what you found. I'm still curious
Yes, if you have a glo-plug solenoid then it should be where the glo-plugs
are getting power from. I would look on the engine but its no guarantee.
The concern is that without one you may continue to burn the the
connector, contacts, or worse the wires.
Josh
On Aug 17, 2015 7:09 AM, David Knecht
TefGel!
Dennis C.
Sent from my iPhone
On Aug 16, 2015, at 4:13 PM, David Knecht via CnC-List
cnc-list@cnc-list.com wrote:
I wanted to report back on the latest on my engine panel. I was able to get
the connector in the engine compartment apart today. Two of the pins were
Thanks for letting us know what you found. I'm still curious to know if
you have a glo-plug solenoid.
If you don't have, can't fine, can't wait for tefgel then silicone
dielectric grease (spark plug boot grease) can be found at any auto parts
store and is a good alternative.
Josh Muckley
S/V
I wanted to report back on the latest on my engine panel. I was able to get
the connector in the engine compartment apart today. Two of the pins were
particularly black and all looked corroded. I cleaned them all and put it back
together and remarkably, the engine started with both buttons
