Re: Stus-List PVC Handrails, 12" On Center

I read somewhere on the forum that the holes mounting those rails are not a standard distance apart. I would have them reproduce from the original! My wife takes great pride in her varnish on those rails! I am a lucky man! Rick Paikea 37/40 Rick Rohwer 509 306 1094 > On Aug 9, 2017, at

Stus-List Harken Roller furler

Hello all, I'm having some trouble with my old Harken Roller furler. It seems to get stuck whne unfurling the sail. It doesn't take much to get it past the sticking point and I can still roll it in by hand without too much effort. I'm going down in Saturday to play around with it. Do any

Re: Stus-List Refit for a 1981 Landfall 38

Hi John, Using Blogger (i.e. blogspot) is rather easy and it is free. Much of my recent efforts I have not bothered to write up as they are mostly never ending tasks: little cosmetics projects, engine maintenance, leak hunting, brightwork, … I am working on a water heeling bag system so

Re: Stus-List PVC Handrails, 12" On Center

Rick, You are correct. The holes are not standard. They were apparently drilled in place. As such each one has minute differences in placement. That's why the templates are so important. I will say that despite the appearance of the wood rails the SS ones are so much stronger and easier to

Re: Stus-List Wikipedia. featuring a few different C models

Ken, Very well written. Mine doesn't have ball bearing genoa cars, however. :-(. Gary S/V Kaylarah '90 C 37+ East Greenwich, RI, USA ~~~_/)~~ On Tue, Aug 8, 2017 at 11:01 PM, Marek Dziedzic via CnC-List < cnc-list@cnc-list.com> wrote: > It seems that the edits are coming from

Re: Stus-List Wikipedia. featuring a few different C models

Absolutely well done, Ken! We've only had our C 37/40+ for about 6 months now, and hope that in another year or so ours will start to look almost as good as yours!  Thanks for sharing! Bruce Whitmore (847) 404-5092 (mobile) bwhitm...@sbcglobal.net From: Gary Russell via CnC-List

Re: Stus-List CnC-List Digest, Vol 139, Issue 47

Nice, So where are the keys…. Have you thought about adding a section on the running rigging? I.e. details specific to Touche’ - Paul E. 1981 C 38 Landfall S/V Johanna Rose Fort Walton Beach, FL http://svjohannarose.blogspot.com/ > On Aug 9, 2017, at 3:50 PM,

Re: Stus-List Bow light

I tried that. It jammed and parted. That's why is was such a PIA. Good luck David! Virus-free. www.avg.com

Re: Stus-List Harken Roller furler

Mark has identified two probable culprits. Drop the sail and flush both the swivel and the drum. Flush liberally with water from multiple angles. Spray some McLube in both if you like. It's optional but a good idea. While the sail is down, inspect, as best you can, all the joints in the

Re: Stus-List Harken Roller furler

forgot to mention, no halyard restrainer. the sheave is right behind the headstay, where the halyard exist the mast On 8/9/2017 3:42 PM, Dennis C. via CnC-List wrote: Mark has identified two probable culprits. Drop the sail and flush both the swivel and the drum. Flush liberally with

Re: Stus-List Harken Roller furler

My old Harken furler was sticking 2 yrs ago - one day at an anchorage I decided to investigate by pulling the sail in and out a couple times by hand - the "stick" seemed subtle but suddenly a hundred Torlon balls rained down from the mast head! Seems my retaining ring clamp on the upper

Re: Stus-List PVC Handrails, 12" On Center

Ditto to all Dennis said. From: Dennis C. via CnC-List Sent: Wednesday, August 09, 2017 11:54 AM To: CnClist Cc: Dennis C. Subject: Re: Stus-List PVC Handrails, 12" On Center I used Whitewater for SS handrails on a J30. Turned out great. Just have to be VERY careful about measuring and

Re: Stus-List Harken Roller furler

Ok, so, I did check the swivel before raising the sail and it seemed fine. That was only about 3 weeks ago. I think dropping the sail and flushing is probably the best, 1st, line of action. Someone else mentioned maybe supporting the mast with the halyard and releasing the head stay and

Re: Stus-List Anchor alarms

Funny story about Drag Queen...my buddy downloaded it for me right before I had to go to the Verizon store for some problem...he goes right to apps..I felt compelled to explain the latest download. Although with the heels he wasn't buying it... Sent from my Verizon 4G LTE smartphone

Re: Stus-List PVC Handrails, 12" On Center

Second that too. My originals were drilled in place at the factory. My replacements needed to be oriented correctly fore and aft and port and starboard or they would not fit. Dave 33-2 Sent from my iPhone > On Aug 9, 2017, at 12:50 PM, Josh Muckley wrote: > > Rick,

Re: Stus-List CnC-List Digest, Vol 139, Issue 47

Sent from my Samsung Galaxy smartphone. For those of you who installed the stainless steel grab rail.  Did anybody nurl the rail and did it prevent the slippage problem Paul Hood81 C 34 - RefugeGeorgian Bay Rick, You are correct.  The holes are not standard.  They were apparently drilled

Re: Stus-List Bow light

And per my prior post...wire is not moving. This is a fall job. Ugh. Sent from my Verizon 4G LTE smartphone Original message From: Joel Aronson via CnC-List Date: 8/9/17 3:22 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Joel Aronson

Re: Stus-List PVC Handrails, 12" On Center

I had mine built so that there were 1/4x20 studs that extended from the bottom of each standoff. This allowed full reuse of the existing holes and through bolting. Many of the other replacements are a type of 3 screw flange for the standoffs and straight tubing. I completely dug out the

Stus-List Boat operating manual

How many listers have operating instructions specific to their boat? Good for someone who doesn't know the boat. Good to impress a potential buyer or helpful for a new owner (I ain't selling!) Touche' has a manual that, in addition to the operating instructions, contains the boat's USCG and

Re: Stus-List PVC Handrails, 12" On Center

Thanks Josh,  pictures would be great. Sent from my Verizon, Samsung Galaxy smartphone Original message From: Josh Muckley via CnC-List Date: 8/9/17 11:27 AM (GMT-05:00) To: C List Cc: Josh Muckley Subject:

Re: Stus-List Bow light

I used the old wire to pull the new! It may have been dumb luck though! Sometimes even I get some dumb luck! Rick Paikea 37/40 Friday Harbor until 10:00 today and then off to Orcas. Rick Rohwer 509 306 1094 > On Aug 9, 2017, at 06:24, Joel Aronson via CnC-List >

Re: Stus-List PVC Handrails, 12" On Center

Many of us have gone with stainless steel handrails. I had mine custom made by whitewatermarine.com they turned great. If you remove the old ones first and send them with a cardboard template of each side you can better guarantee the results. I don't think I have any pictures but will probably

Re: Stus-List PVC Handrails, 12" On Center

I used Whitewater for SS handrails on a J30. Turned out great. Just have to be VERY careful about measuring and sending them old ones. Your old rails may be both curved and crowned. They may "unflex" a bit once you remove them. Like Josh says, templates for the curve AND the crown will help.

Re: Stus-List PVC Handrails, 12" On Center

Second on stainless. It's easier to get custom fitted than you might think. Local shop took my old ones, used them to create a hole-Template on a length of angle aluminum, then fabricated new ones on that. Perfect fit. Increased the stand off height as well. Shoulda done it sooner. Dave,

Stus-List tus-List PVC Handrails, 12" On Center

Bruce Alera came with SS grab rails. Her's a pic. https://flic.kr/p/cuGBro Tom Buscaglia S/V Alera 1990 C 37+/40 Vashon WA P 206.463.9200 C 305.409.3660 www.sv-Alera.com > On Aug 9, 2017, at 8:39 AM, cnc-list-requ...@cnc-list.com wrote: > > Message: 6 > Date: Wed, 09 Aug 2017 11:38:39 -0400

Re: Stus-List Harken Roller furler

I find my Furlex furler gets hard to wind the sail in when I have the jib halyard fully tight. If I ease the Halyard a couple of inches, it turns much easier. It is one more step when dousing the sail, but my halyard leads aft to the cockpit so it isn't a huge issue. I also suspect the furler

Re: Stus-List PVC Handrails, 12" On Center

Turns out that I had pictures the whole time. Well now there are more. Part of the series of pictures is of the hole which was needed in order to remove the port aft fastener. Naturally I used that same access port to attach the new 1/4x20 stud. In retrospect I would not include that stud.

Stus-List Bow light

So I am trying to replace the bow light wire in the pulpit. Tried to work the wire from both ends. Nuthin. Popped the pulpit leg where wire exits thru deck and it looks like a feeder tube thru the deck to lead the wire. It seems I need to remove the whole pulpit to feed a new wire. Am

Stus-List PVC Handrails, 12" On Center

Hello all, I'm looking for someone to correct me if I'm going down a bad path... Our 1994 C 37/40+ has grayed out teak grab rails, 12' on center with 6 loops.  We're in Florida, where sun likes to strip varnish away with ruthless abandon, and the boat has a sleek, modern look on the outside

Re: Stus-List Bow light

It is a PIA job! I manged to feed the wire from the bottom and grab the end of the wire with needle nose pliers at the exit hole. Spray the wire with McLube. It will feed easier. Joel On Wed, Aug 9, 2017 at 8:53 AM, David via CnC-List wrote: > So I am trying to