Robin
If you are referring to the Campbell sailor prop their specs differ from a more
traditional prop. I have a Campbell prop. Spoke to the owner very
knowledgable.
Mike
C 37
Sent from my iPad
> On Jun 5, 2016, at 11:28 PM, Robin Drew via CnC-List
> wrote:
>
>
.
>
> Best regards,
>
> David Miles
>
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
> Persuasion37 via CnC-List
> Sent: June-01-16 5:11 PM
> To: cnc-list@cnc-list.com
> Cc: Persuasion37
> Subject: Re: Stus-List Vent Fans -- Where Do You
s,
>
>
>
> David Miles
>
>
>
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
> Persuasion37 via CnC-List
> Sent: June-01-16 5:11 PM
> To: cnc-list@cnc-list.com
> Cc: Persuasion37
> Subject: Re: Stus-List Vent Fans -- Where Do You Have Them?
>
Thanks Bettina
Mike
Sent from my iPad
> On May 29, 2016, at 11:44 PM, Bmue via CnC-List wrote:
>
> Hi Mike,
> Quikrete, polyurethane, self levelling
> Bettina
>
>> On May 28, 2016, at 10:46, Persuasion via CnC-List
>> wrote:
>>
>> Hi Bettina
t 8:11 PM, David Miles via CnC-List <cnc-list@cnc-list.com>
> wrote:
>
> Do you have some pictures you can post of the Vent Fans Mike?
>
> Best regards,
>
> David Miles
> Impulse
> C 30-2
>
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Beh
I just use white electrical tape to cover the spreader tip pin and retainer. I
do pull my mast every year though.
Mike
Persuasion
C 37 K/CB
Long Sault
Sent from my iPad
> On Jun 1, 2016, at 11:12 AM, Tom Alessi via CnC-List
> wrote:
>
> Hello all,
> Any
I can attest to the fact that Homeland Security is anal about reporting each
movement. On our trip south in 2014 I was travelling with another boat and the
captain said he never call in during is north bound trip the previous year. In
Annapolis they caught up with us and advised us of our
On Persuasion the cowls were removed and solar vents installed. Over the
galley sink another was installed.
Mike
Persuasion
C 37 K/CB
Long Sault
Sent from my iPad
> On Jun 1, 2016, at 1:37 PM, Edd Schillay via CnC-List
> wrote:
>
> Listers,
>
> After launching the
Hi Doug.
On my 37 I cannot install the bolts if I tune the mast first. I've done this a
couple of times now and the only thing to do is loosen everything, install the
bolts and re-tune.
Mike
C 37
Long Sault
Sent from my iPad
> On May 30, 2016, at 8:05 PM, doug.welch--- via CnC-List
>
Make that 2 data points. That is how mine is attached. I think it was
installed in ‘98. Two trips to the Bahamas (one PO) no issues with quadrant.
I would be curious how it would be installed otherwise.
Mike
S/V Persuasion
C 37 Keel/CB
Long Sault
From: Robert Boyer via CnC-List
Sent:
Your one hour rating is 20 hp. Whatever that means. Your constant rating is
16 hp at 3400 rpm.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Jun 16, 2016, at 1:36 PM, Lorne Serpa via CnC-List
> wrote:
>
> I have a 1988 C 30MKII. The engine plackard says 2GM20F and 16hp.
Easy Off oven cleaner. We have washed our boat several times with EasyOff and
have not seen any detrimental effects to the gelcoat. Be careful it will burn
your skin.
Polyglow you love then you hate it.
Mike
C 37
Long Sault, ON
> On May 15, 2016, at 11:41 AM, Jerome Tauber via CnC-List
>
I'm wondering if I could start receiving emails from the list again?
Thanks
Mike
Begin forwarded message:
> From: "Persuasion"
> Date: May 29, 2014 at 9:56:23 AM EDT
> To:
> Subject: Cruising
>
> Hi Stu
>
> Just wanted to let the list know
Jeremy
Holland Marine had them. You could check there web site. When I renewed some
of mine they had two styles. Make sure you get the right design, they are not
interchangeable.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Jul 25, 2016, at 7:56 PM, Jeremy Ralph via CnC-List
>
Stephen
Other things to consider: 1) over all height, there are some low bridges out
there, 2) width, some highways/roads may require an escort and 3) how would you
transport the mast?
Reminds me of having Persuasion trucked from Annapolis area to Kingston On.
Mike
PERSUASION
C 37 K/CB
Long
I found them at Home Depot or Lowes
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Jul 29, 2016, at 9:56 PM, Lorne Serpa via CnC-List
> wrote:
>
> I need to replace a few caps that cover the bolt holes on the interior of the
> cabin roof where the exterior teak handholds
;> On Tue, Aug 9, 2016 at 5:33 PM, Persuasion37 via CnC-List
>> <cnc-list@cnc-list.com> wrote:
>> Dennis
>>
>> I just had to answer your just gotta answer. LOL
>>
>> I used Home Depot FRP sheets to replace the original headliner panels that
>>
Hi Rick
I wasn't going to put my plug in but I know where there is a nice 37 footer for
sale. Keel centre/board draws 4' 6".
Not officially for sale yet but it might fit your schedule. Check out
Persuasion37.com
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Aug 14, 2016, at 11:47 AM, Rick
I fail to see the problem with the ladder. You don't want riff raff getting
back on the boat.
My apologies to all mother in laws
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Aug 13, 2016, at 10:28 AM, G Collins via CnC-List
> wrote:
>
> I will second the comments about
If it is anything like mine the cable is swagged to a 1/2" diameter rod (for
lack of better term). Within About 1/2" from the end there is a 1/4" hole.
The rod passes through a hole in the end of the centre board and a 1/4" bolt
goes through a hole in the centre board and through the rod.
Joel
If he might be interested in an 1985 you could direct him to my website
www.persuasion37.com
It is more of a cruiser than a racer.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Jul 8, 2016, at 9:58 AM, Joel Aronson via CnC-List
> wrote:
>
> The guy who bought my
Can you get Goop where you live. I've found Goop can seal/bond just about
anything.
http://eclecticproducts.com/products/amazing-goop.html
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Jul 7, 2016, at 5:56 PM, kelly petew via CnC-List
> wrote:
>
> One of my water tanks
Randy
The only thing I ever found to remove silicone was good old gasoline.
Mike
S/V Persuasion
C 37 Keel/CB
Long Sault
From: RANDY via CnC-List
Sent: Saturday, August 6, 2016 3:51 PM
To: cnc-list
Cc: RANDY
Subject: Stus-List Solvent for Silicone
Listers-
My exterior handrail replacement
Frank
When my gauge stop working it was only a loose ground.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Jul 22, 2016, at 8:45 PM, Franklin Schenk via CnC-List
> wrote:
>
> Is there a simple way to check out the fuel level sensor to see if it is
> working properly? The
Dennis
I just had to answer your just gotta answer. LOL
I used Home Depot FRP sheets to replace the original headliner panels that were
made of vinyl covered plywood. They were in deplorable shape from water
damage. After re-bedding everything and painting the headliner with Interlux
Blue
Sorry Edd
There are pictures at www.persuasion.com
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Feb 23, 2017, at 1:10 PM, Edd Schillay via CnC-List
> wrote:
>
> Listers,
>
> After watching the Brown family on Alaskan Bush People last night install a
> wind turbine to
Edd
I installed a 450 MarineKinetix in Annapolis on my way south in 2014. Install
was simple. I mounted it on a poll I purchased from e-marine. It's aluminum
and they coat the inside to reduce vibration and noise. I love it when the
wind is blowing 15+ kts. I chose this one because I saw
/ Generators
Mike — I think that link isn’t correct…
— Fred
Fred Street -- Minneapolis
S/V Oceanis (1979 C Landfall 38) -- on the hard in Bayfield, WI :^(
On Feb 23, 2017, at 2:27 PM, Persuasion37 via CnC-List
<cnc-list@cnc-list.com> wrote:
Sorry Edd
There are pi
My 2014 surveyor recommended it and my insurer insisted upon it.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Feb 23, 2017, at 10:37 AM, Alex Giannelia via CnC-List
> wrote:
>
> Do the current ABYC standards insist on GFCI outlets for 117 VAC branch
> circuits?
>
>
> When is a good time then? Was the cold water an issue? How was the weather?
>
> Jessica
>
>> On Monday, August 22, 2016, Persuasion37 via CnC-List
>> <cnc-list@cnc-list.com> wrote:
>> Hi Jessica
>>
>> I sail out the St. Lawrence in 2014. Officiall
For all of my fellow Canadians. Collodion Regs.
http://laws-lois.justice.gc.ca/eng/regulations/C.R.C.,_c._1416/
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Sep 12, 2016, at 11:42 AM, Andrew Burton via CnC-List
> wrote:
>
> Rob, I'm pretty sure the steaming light is
Bob
Have a great trip. Not sure if this is your first trip or not but I'm sure you
will make lots of memories. We made the trip in 14/15. Met many great
cruisers and cemented some great friendships.
We'll keep and eye on your blog.
Bon-yoyage
Mike
PERSUASION
Www.persuasion37.com
C 37
To the line screwed down. My manual states .7 litres.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Oct 7, 2016, at 6:22 PM, Pete Shelquist via CnC-List
> wrote:
>
> So I need to ask a rookie question – I’m replacing the tranny oil and the
> dipstick has one line on it.
Well I’ve finally started to repair my centreboard. Some of you might remember
that the pendant came out in my hand while in the Bahamas,fortunately it has
been jammed up for years. As soon as I returned to Canada I had the boat
pulled and removed the centreboard. I’ve share a few pictures
f it and
> drove the ~ 4" diameter SS pin through it to secure it to the trunk.
>
> Charlie Nelson
> Water Phantom
> C 36 XL/kcb
>
> cenel...@aol.com
>
>
> -Original Message-
> From: Persuasion37 via CnC-List <cnc-list@cnc-list.com>
>
Hi Richard
Several years ago during haul out I noticed the board was not up all the way
and the fibreglass at the end was frayed. The crane director asked me what I
wanted to do. I had no choice but to place Persuasion in her cradle. As she
was set down on her keel you could hear the
; s/v Bushmark4; C 37 CB; Ohio River, Mile 584.4
>
> Richard N. Bush
> 2950 Breckenridge Lane, Suite Nine
> Louisville, Kentucky 40220-1462
> 502-584-7255
>
>
> -----Original Message-
> From: Persuasion37 via CnC-List <cnc-list@cnc-list.com>
>
If you are then so am I. priced from $25.00 to $498.00
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Aug 23, 2016, at 9:42 PM, Ronald B. Frerker via CnC-List
> wrote:
>
> I must be dense; one place seems to indicate the book is around twenty bucks
> and another is in the
I’ve added more pictures of my centreboard repair. Find them here.
Mike
S/V Persuasion
C 37 Keel/CB
www.persuasion37.com
Long Sault___
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our
Don't forget the Delta Sure Set. Spent a year on the hook and 30 kt winds were
not uncommon and once saw gusts of 50 kts. Scope has everything to do with a
good set.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Aug 28, 2016, at 12:12 PM, Robert Boyer via CnC-List
>
Hi Jessica
I sail out the St. Lawrence in 2014. Officially retired May 31 and left June 1
from Long Sault. We went as far as the Bahamas. No ocean crossings but a lot
of coastal sailing. My only advise is the the St. Lawrence is very cold in
June.
Mike
S/V Persuasion
C 37 Keel/CB
Dwight
Have all the CMC locations stopped repairing Raymarine. They fixed my radar a
few years ago. Was very happy with the service. Here is a list of there
Locations. http://www.marineelectronics.com/companies/company/cmc-electronics
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Oct 2, 2016,
e
> themselves have no options for getting the Raymarine gear they sell
> fixed but for sending it to the USA.
> Dwight Veinot
> C 35 MKII, Alianna
> Head of St. Margaret's Bay, NS
> d.ve...@bellaliant.net
>
>
>
> On Sun, Oct 2, 2016 at 2:29 PM, Persuasion37 via CnC
Doesn't the engine anti-freeze contain rust inhibitors and the rv stuff doesn't?
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Oct 14, 2016, at 2:49 PM, Della Barba, Joe via CnC-List
> wrote:
>
> ???
> I think you are trying to find engine antifreeze. I have never tried
Greg
I have used a Delta Sure-set 35 exclusively for about 8 years. It has worked
well from the Thousand Islands to the Bahamas. I have sat through storms with
gusts to 50 kts. and never drug. I also carry a Bruce 45 and a Danforth 35 but
am strongly thinking of removing them from the boat.
HERE, HERE!!! (much table-pounding). Mr. piper's email did more damage than
anything I've read thus far. What ever happened to freedom of speech. As Dave
stated it is only one mans opinion.
Stu I think Mr. Piper should have aces to this discussion.
Stu we all appreciate your hard work and
Persuasion is not listed yet but in anyone is interested they can contacted me
off list. Latest survey spring of 2014. Cruiser not a racer. Well I've never
raced in the 10 years I've owned her.
Seriously one of these days I'll have to make a list of all the upgrades and
maintenance I've
Violeta
I can't help you with your toenail, but I do have a word of caution. I
strongly recommend that you use two lines on your mooring ball. There was a
fellow at our club that only used one line at the start of the season, shortly
after launch he had to be pulled off the rocks. Also one
Alan.
Isn't FRP "blasphemy" in a salon or so I thought that was the consensus when I
did mine. I tried the Velcro route and didn't like the look. Too bulky at the
edges. I used 4200 to secure the panels. So semi-permanent. I re-bedded
everything prior. Had to brace the panels in place
Before I went on my cruise to the Bahamas I researched tablets for
waterproofness. Only Sony advertised their tablet as water. I'm not naive, I
do not believe it to be truly water proof but splash proof yes. So I mounted
the Sony at the helm on a home made mount. I also carry an IPad,
My yanmar manual list Rotella T as one of the recommended oils for my 3HM30F
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Oct 12, 2016, at 12:17 PM, doug.welch--- via CnC-List
> wrote:
>
> Lots of different recommendations found via Google but favoring rotella t
> 15W40.
-list.com] On Behalf Of Marek
>> Dziedzic via CnC-List
>> Sent: Tuesday, November 29, 2016 1:36 PM
>> To: cnc-list@cnc-list.com
>> Cc: Marek Dziedzic
>>
>>
>> Subject: Re: Stus-List Kanzaki transmission oil change
>>
>>
>>
&
And that is why I don't race. Great video.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Dec 6, 2016, at 11:40 PM, Kevin Driscoll via CnC-List
> wrote:
>
> That video is an all time classic in my book. I can not believe it doesn't
> have a gazillion views.
>
>
>> On
Paul
We did that trip in 2014/15. Before we left I had Genco fabricate and install
a dodger/bimini/enclosure. I am very please with their work. Side panels are
removal or can be rolled up and they have screens. If you are going the same
route as me (out the St. Lawrence) you’ll want a full
That's the way I do it. Check for correct fluid type. Mine takes ATF. - .7
litres. A little less because it's hard to vacuum all of the fluid out.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Nov 29, 2016, at 8:31 AM, Hoyt, Mike via CnC-List
> wrote:
>
> HI
>
>
Mark
There are several varieties. Some will cure underwater. I have 2 or 3 on
Persuasion. I did do a repair on a waterline on a friends boat. To my
knowledge it became a permanent repair. Can't remember which ones I have.
Probably available at Harbour Freight or Princess Auto north of
https://www.emarineinc.com/
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Nov 30, 2016, at 7:24 PM, Ryan Doyle via CnC-List
> wrote:
>
> Hey all,
>
> I'm trying to price out a large solar system and new house battery bank for a
> 42' cruiser and I'm curious where fellow
Jacob
I installed a vertical windlass with capstan in the anchor locker. I
fabricated a plywood shelve in the anchor locker at the right height to ensure
proper windlass operation. The shelf is made of 2 layers of 3/4 inch plywood.
I had to cut the pieces of plywood in two to install. They
http://www.boatinternational.com/yachts/news/crewmember-dies-after-falling-on-sailing-yacht-germania-nova--33067
Enough said. Don't do it alone make sure you are attached to the mast at all
times
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Mar 16, 2017, at 11:01 AM, Ryan Doyle via CnC-List
Check the ground wire on top on the tank connect to the fuel gauge. That is
what was wrong with mine
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Aug 2, 2017, at 8:58 AM, Matthew L. Wolford via CnC-List
> wrote:
>
> FWIW, I also re-fuel using 5-gallon cans unless I’m
John
For short trips I keep the dinghy (10' RIB) on the dinghy tow. On longer trips
or over nighters I joist it to the fore deck. It's ok for sailing but a bit of
a pain when anchoring.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Aug 15, 2017, at 1:49 PM, john wright via CnC-List
Someone should tell my daughter she doesn't really have an Amazon Prime account樂
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Aug 13, 2017, at 10:49 AM, Bruce Whitmore via CnC-List
> wrote:
>
> You Canadians don't have the benefit of Amazon Prime? That would suck... OK,
And the Admiral's fingers. She was pointing to a spot that required washing on
the coach roof. Before she could move I blasted the spot and her. She still
bears the scar but has forgiven me
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Aug 14, 2017, at 3:00 PM, Joel Aronson via CnC-List
>
t;
> These grates are best left for the wooden boat guys.
>
> Jack Fitzgerald
> HONEY - C 39TM
> US12788
> Savannah, GA
>
>
>
>
>> On Mon, Aug 14, 2017 at 11:40 AM, Persuasion37 via CnC-List
>> <cnc-list@cnc-list.com> wrote:
>> David
&
David
Have you looked at boats with the teak grating. They look nice and we had one
but it was a PITA to clean. If you like looking at food crumbs, body hair and
the like go for it. A simple hosing won't suffice. You have to remove it to
do a thorough job.
Mike
PERSUASION
C 37 K/CB
Long
Edd
When my linear drive start acting sporadic it was the brushes. By sporadic I
mean the autopilot would turn the wheel to come back on course then it would
let go and just hold the last correction. Sometimes it would just go straight
sometimes it wanted to do circles. The brushes were
Tim
When I bought Persuasion in '05 she had 2- Group 4D Lifeline batteries has
house batteries. Served me very well. In 2014 I replaced them in kind. Very
happy with Lifeline and didn't find the price off putting
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Jul 9, 2017, at 12:28 PM, tim via
I would not of survived if the AP didn't do 90+% of the steering on our trip to
the Bahamas and back.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Jul 18, 2017, at 10:45 AM, Edd Schillay via CnC-List
> wrote:
>
> Fred,
>
> Understood — and I have a self-imposed rule
Donald
This happened to me in the Bahamas, fortunately my board was jammed in the up
position. If my board was down I would be concerned it could get damaged. I
believe the cable can be replaced while the boat is in the water. Your biggest
challenge will be getting the cable end made that's
I mounted mine in the anchor locker on a shelf I constructed from 1.5" plywood.
It is wedged shaped at the ends to fit the hull, and tabbed to the bulkhead. I
have a capstan with chain gypsy and used a hole saw to cut a hole in the anchor
locker lid to accommodate the capstan. No noticeable
>> On May 28, 2017 8:43 AM, "Persuasion37 via CnC-List" <cnc-list@cnc-list.com>
>> wrote:
>> I mounted mine in the anchor locker on a shelf I constructed from 1.5"
>> plywood. It is wedged shaped at the ends to fit the hull, and tabbed to the
>> bulk
I used PlasTeak, bought it from Defender. Only draw back is it cannot be
removed like the old panels. I screwed down epoxied coated plywood then
applied the PlasTeak. If you go this route make sure you make access panels to
access the full length of the bilge.
Mike
PERSUASION
C 37 K/CB
Long
Jim
I had the same issue. I cut the 2 pieces in two ensuring the cuts were offset.
Then I epoxied everything in place.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On May 29, 2017, at 2:10 PM, Jim Watts via CnC-List
> wrote:
>
> Josh, I also discovered that I couldn't get
steak and countersunk to stop the heads being
> proud?
>
> --
> Jonathan
> Indigo C 35III
> SOUTHPORT CT
>
>> On May 28, 2017, at 15:07, Persuasion37 via CnC-List <cnc-list@cnc-list.com>
>> wrote:
>>
>> I used PlasTeak, bought it from Defen
Bunny
When I removed my centre board the pin was bent. It is made of 1" stainless
steal. Couldn't tell just looking at the keel.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On May 30, 2017, at 3:46 PM, Bunky via CnC-List wrote:
>
> Just had the bottom of Luna, C painted
Chris
You've received lots of good advise. One recommendation I would make is get
Garmin Blue Charts then become an Active Captain member and download the data
base. I found Active Captain invaluable on our cruise to the Bahamas and back.
I use android tablet at the helm with Navionics, iPad
Let's not forget us Canadians do not give away free charts.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Sep 17, 2017, at 10:33 AM, Danny Haughey via CnC-List
> wrote:
>
> On or first boat, an oday 22, I used water repellant paper charts. These
> were fine as we didn't
Patrick
What's your sailing radius. Paper charts are heavy and take up a lot of space.
I was once told the paper charts to go from Toronto to St. John's weighed 60
lbs. Heck our coast guards don't use paper any more.
Been paperless and happy for at least 5 years.
Mike
PERSUASION
C 37
Agreed, however I've been boarded and inspected by 3 different countries and
have never been asked to show any charts of any type. In this day and age I
doubt anyone would take exception to anyone not carrying paper charts.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Sep 17, 2017, at 12:22 PM,
Kracor's catalogue.
https://www.kracor.com/support/holdingtanks.pdf
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Sep 20, 2017, at 7:18 AM, bushmark4--- via CnC-List
> wrote:
>
> That seems odd; I purchased my holding tank directly from Kracor without any
> issue..I just
Hi Bob
Here are a few pictures of my board. Approx weight is 300 - 400 lbs.
https://drive.google.com/drive/mobile/folders/0B1YsbvO03cClZkhpejlvbFNIUTQ
Any questions give me a shout.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Oct 10, 2017, at 10:46 AM, bobmor99 . via CnC-List
Wow! What am I doing with a 120 amp alternator?
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Sep 12, 2017, at 9:06 PM, Josh Muckley via CnC-List
> wrote:
>
> The alternator should be limited to the changing capabilities of the
> batteries. Standard lead-acid would be 20
Denis
I use a cheap transfer pump operated by a drill. Pumps 5 gals in a couple of
minutes. No more trying to for fuel through a funnel and no spills. Can pump
a jerry can dry, less than a tbsp. Now you purist hush. I'm pumping diesel.
Been doing it for 4 years.
Mike
PERSUASION
C 37
s last longer than a
> couple-three times.
>
> Marek
>
> Sent from Mail for Windows 10
>
> From: Persuasion37 via CnC-List
> Sent: Saturday, September 9, 2017 21:39
> To: cnc-list@cnc-list.com
> Cc: Persuasion37
> Subject: Re: Stus-List Fuel filter funnel search
>
Patrick
Those are massive hoses and through hull you have on your boat. I'm thinking
the strainer top is 2" and the hoses are in the 1/2" range.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Sep 11, 2017, at 1:51 PM, Joel Aronson via CnC-List
> wrote:
>
> Patrick,
>
>
Oops sorry this should have been directed to Joel.
Mike
PERSUASION
C 37 K/CB
Long Sault
Begin forwarded message:
> From: Persuasion37
> Date: September 11, 2017 at 4:54:24 PM EDT
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Perko sea strainer failed - almost
Did everyone get this email.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Oct 22, 2017, at 10:33 AM, Stu via CnC-List wrote:
>
> Your email address bounced 2 messages from me. Do you have another address?
>
> Stu
>
>
> ___
>
Ditto
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Oct 25, 2017, at 9:21 PM, G Collins via CnC-List
> wrote:
>
> I find the baby stay question an interesting one. We've got the adjustable
> babystay, but don't race, so usually it gets tensioned at the beginning of
> the
Joe
I was going to say the same. Years ago Practical Sailor tested radar
reflectors and those type tested poorly. Consider it a blessing now you can get
a proper one.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On May 21, 2018, at 11:27 AM, Joe Della Barba via CnC-List
>
Me too
Mike
PERSUASION
C 37 K/CB
Long Sault
> On May 23, 2018, at 9:06 PM, G Collins via CnC-List
> wrote:
>
> More than one!
> Graham Collins
> Secret Plans
> C 35-III #11
>> On 2018-05-23 10:46 AM, Edd Schillay via CnC-List wrote:
>> John,
>>
>> One lister here
Marek
I believe licensing in a provincial thing, numbers. TC registers vessels. I’m
with Rob I registered with TC in 2005. To do so you have to do a vessel search
to ensure the name you use has not already been registered. A friend tried to
register “Amazing Grace” and had to go with
Hi Tom
I also have a Harken roller and have been looking for roll pins. On mine the
pins are 1/8” dia and about an inch long. Canadian Tire has 1/8X3/4. Also
Princess Auto as a package of 120 roll pins of various sizes. Once I find a 1
inch one I’ll have to file/grind to the right length.
Al
You may be looking at the wrong standard.
From Transport Canada Marine
All extinguishers should be visually inspected each month, and serviced once a
year. All carbon dioxide extinguishers should be weighed annually. Dry chemical
extinguishers should occasionally be turned upside down and
it clearly. Any Canadians have an idea?
>
> Alan Liles
> SV Elendil
> Vancouver BC
>
>
>> On Jun 29, 2018, at 12:21 PM, Persuasion37 via CnC-List
>> wrote:
>>
>> Al
>>
>> You may be looking at the wrong standard.
>>
>> From Tra
Best before date. Where’s that found?
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Jun 30, 2018, at 7:34 PM, Marek Dziedzic via CnC-List
> wrote:
>
> I haven’t seen it, either. As far as I know, as long as your extinguisher has
> a best before date that is not past, it is good to go.
>
>
Richard
A few years back when I fixed the C smile I took my keel down to the bare
lead. At that time I read some where that epoxy wouldn’t stick to the lead
unless it was free of oxidation. Hard to do with lead. I also learned that
the best way to apply the epoxy and get it to bond was to
No debate here. Everyone knows that CQRs belong in the smelter. No information
on your problem though.
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Apr 29, 2018, at 1:35 PM, Brien Sadler via CnC-List
> wrote:
>
>
> Listers,
>
> Quick question to all the 35-3 owners.
gt; <cnc-list@cnc-list.com> wrote:
>
>> I did Mike.
>> Greg
>>
>> On Oct 22, 2017, at 1:20 PM, Persuasion37 via CnC-List
>> <cnc-list@cnc-list.com> wrote:
>>
>>> Did everyone get this email.
>>>
>>> Mike
>>>
Marek
You remind me of this skit.
https://m.youtube.com/watch?v=wkDvqQKGgDA
Mike
PERSUASION
C 37 K/CB
Long Sault
> On Jan 6, 2018, at 11:50 PM, Marek Dziedzic via CnC-List
> wrote:
>
> Quite bitter. I chickened out and skipped this morning skiing – it was -26 C
> an
Sean
If I may chime in here although I have a 37. In the last 12 years I have
probably put the board down 3 times. My board is currently out on the boat.
Has been out since 2015. This is the year to reinstall? Any way I thinking of
reinstalling and pinning it up and calling it a shoal
1 - 100 of 139 matches
Mail list logo