Sounds like it's a keeper for now. Is there a way to test this AP on shore.
Mast is down.
Thanks,Paul Hood416.799.5549 c
Date: Mon, 13 Jun 2016 16:56:37 +
From: "Della Barba, Joe"
Subject: Re autopilot
The digest mode is making this hard to follow, but if it is what I think it is,
modern
Im trying to send wiring (Transducer and vhf/power) to the Chart plotter and
alao to a ram mike at the pedestal Wire ends are factory and told by Standard
Horizon not to cut. They are 3/4" and 7/8" diameter each Pedestal Guard rail
is barely 1" O.D. I'm looking for recommendations. Do I1) mak
ed without being properly filled with epoxy.
I would not cut the wires for the depth transducer.
good luck
Marek
1994 C270 ?Legato?
Ottawa, ON
From: paul.hood via CnC-List
Sent: Tuesday, June 28, 2016 01:03
To: cnc-list-requ...@cnc-list.com ; cnc-list@cnc-list.com
Cc: paul.hood
Subject: Stus
Sent from my Samsung Galaxy smartphone.
For those of you who installed the stainless steel grab rail. Did anybody nurl
the rail and did it prevent the slippage problem
Paul Hood81 C&C 34 - RefugeGeorgian Bay
Rick,
You are correct. The holes are not standard. They were apparently drilled
I was out Saturday on georgian bay with 20knot winds gusting get to over 25 and
water temps of 9 celcius. sure is cooling quick . Air was 11c. First day for
myself to solo. Boat is coming out today.
Paul HoodC&C 34 '82
From: "Della Barba, Joe"
To: "'cnc-list@cnc-list.com'"
Subject: Re:
Hey Chris
Do you have pictures of the table brackets?
Thanks,Paul Hood81 C&C 34 Georgian Bay
Hi All -
Well, it took until last week for our insurance to finally take our beloved C&C
34 for salvage after Hurricane Matthew in October!
We had a few parts still kicking around that were getting clea
Hey GaryI think I found what I was looking for. Sorry its local to me. My
error. Message: 7Date: Mon, 11 Feb 2019 10:10:00 -0500From: Gary Russell Hi
Paul, Which one was it? It may be mine. Kaylarah?GaryKaylarah'90 C&C
37+East Greenwich, RI, USA~~~_/)~~Paul Hood 416.799.5549 c
nu
I was in contact with Peter and got the survey. Ok boat but 4 year old survey
shows entire deck one side wet and cracks and light damage on one side hull.
The motor appearance to be just fine. Had a few people spew over the survey
and they said run away. 4 year ago survey suggested 9k value
Hi Rod,I might have one. You can call or email me. Paul Hood 416.799.5549 c
Original message From: John Read via CnC-List
Date: 2021-12-22 9:07 a.m. (GMT-05:00) To:
'Stus-List' Cc: John Read
Subject: Stus-List Re: Used Tuff Luff or Harken carbo foil Hi Rod A bit far
away
I tried the Lifesafe beside the Bed-It and there's really no comparison.
Bed-It is way betterPaul Hood 416.799.5549 c
Original message From: Marek Dziedzic via CnC-List
Date: 2022-04-24 8:14 p.m. (GMT-05:00) To: Stus-List
Cc: Marek Dziedzic Subject:
Stus-List Re: butyl ta
Looks like Trex to me. If so, tree was made with a Composite of hardwoods and
plastic. Its kind of a chippy matrrial. I wouldn't use it if that is what it
is. Paul Hood
Original message From: "steven.hickel--- via CnC-List"
Date: 2022-10-31 6:55 p.m. (GMT-05:00) To:
cnc-l
John,You'll need to cut gently down the side from top, from bottom up and
loosen it up till it comes out. Paul Hood 416.799.5549 c
Original message From: John Read Date:
2022-12-10 4:35 p.m. (GMT-05:00) To: 'Stus-List' Cc:
'Paul Hood' Subject: RE: Stus-List Re: Hatch in hea
Hey RandyAre you maybe thinking of a Passport. That's the only one I can think
of that starts with PSent from my Galaxy
Original message From: Randy Stafford via CnC-List
Date: 2023-02-23 2:24 p.m. (GMT-05:00) To: Stus-List
Cc: Randy Stafford
Subject: Stus-List Re: Boatle
Inquiring for a buddy who has a 1979 C&C40 mkiiHis Rudder post is sloppy and
we're dropping it out today. Has anyone done this? Does anyone have
fabrication knowledge, drawings, part suppliers, suggestions to fix, etc? Paul
Hood416.799.5549C&C34 Refuge - Georgian Bay
Please show your appreciat
Inquiring for a buddy who has a 1979 C&C40 mkiiHis Rudder post is sloppy and
we're dropping it out today. Has anyone done this? Does anyone have
fabrication knowledge, drawings, part suppliers, suggestions to fix, etc? Paul
Hood416.799.5549C&C34 Refuge - Georgian Bay
Please show your appreciat
s noticeable fore and aft play. Before we discovered the construction
error, our original plan of attack was to work on the bushings, which in my
case are glassed-in fiberglass tubes. Glad we didn’t do that. MattC&C 42
Custom From: paul.hood via CnC-List Sent: Saturday,
November 4, 2023 1
Went to a specialty hydralics shop to get mine fixed. They couldn't don't.
Went elsewhere and they did fine. Still wasn't cheap. Done work on the 2
hydralics and the pump. Seems I do have periodic failures in the backstay and
pump (seals) too often and usually experienced after the winter. No
I had my pump, backstay and boomvang all serviced by Western Hydralics in
Ontario Canada. They did servicing at different times from $275 cdn to $425 cdn
for each piece. For the American, if shipping is feasible, that's seems to be
much less with the exchange rate. I had the boomvang snap in hal
I don't see the listing. What's althea sale price. Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu
19 matches
Mail list logo