Re: Stus-List Boom insert

[Russ & Melody via CnC-List]

Smart people. Those guys at "sailingservices..."

:)

Cheers, Russ
ex- Sweet, 35mk-1



At 11:36 AM 8/10/2018, you wrote:
Jim, thanks, they don't have it; they suggested the same thing that 
Russ did...have slugs put on the boltrope!


Richard

Richard N. Bush Law Offices
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462
502-584-7255


-Original Message-
From: James Hesketh via CnC-List 
To: cnc-list 
Cc: James Hesketh 
Sent: Fri, Aug 10, 2018 12:37 pm
Subject: Re: Stus-List Boom insert

Richard,

One of the best rigging shops in the U.S. is in Miami, give them a 
call. They may have an idea what suppliers C used for spars over 
the years, or may even know what part asking about.


<http://sailingservices.com>sailingservices.com

Jim Hesketh
Miami, FL
C 26 -- Whisper



J need help identifying a piece of plastic that is an insert into 
the slot of my boom, (1985 C 37); this piece effectively makes the 
slot narrower so that the sail boltrope fits and stays in the 
slot.   I have a loose footed main, but the sail cover uses that 
slot (Doyle cradle cover). The insert was on the boat when I bought 
it 4 years ago and has not been an issue, however, now it is 
breaking into pieces, presumably from UV deterioration and I need to 
replace that piece of plastic...the Doyle folks say they aren't 
familiar with the piece; there are no sail makers or reps in our area...


anyone have any ideas? thought? suggestions? As always, many thanks!

Richard
s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584.4


Richard N. Bush
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462
502-584-7255



___

Thanks everyone for supporting this list with your contributions. 
Each and every one is greatly appreciated. If you want to support 
the list - use PayPal to send contribution -- 
<https://www.paypal.me/stumurray>https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your 
contributions.  Each and every one is greatly appreciated.  If you 
want to support the list - use PayPal to send contribution 
--   https://www.paypal.me/stumurray



---
This email has been checked for viruses by AVG.
http://www.avg.com
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Boom insert

[WILLIAM WALKER via CnC-List]

Google "flex a rail"..something like that?
Bill Walker
CnC 36

Bill Walker 

On Friday, August 10, 2018 bushmark4--- via CnC-List  
wrote:

Jim, thanks, they don't have it; they suggested the same thing that Russ 
did...have slugs put on the boltrope!


Richard


Richard N. Bush Law Offices 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255



-Original Message-

From: James Hesketh via CnC-List 
To: cnc-list 
Cc: James Hesketh 
Sent: Fri, Aug 10, 2018 12:37 pm
Subject: Re: Stus-List Boom insert

Richard,


One of the best rigging shops in the U.S. is in Miami, give them a call. They 
may have an idea what suppliers C used for spars over the years, or may even 
know what part asking about.


sailingservices.com


Jim Hesketh

Miami, FL

C 26 -- Whisper




J need help identifying a piece of plastic that is an insert into the slot of 
my boom, (1985 C 37); this piece effectively makes the slot narrower so that 
the sail boltrope fits and stays in the slot.   I have a loose footed main, but 
the sail cover uses that slot (Doyle cradle cover). The insert was on the boat 
when I bought it 4 years ago and has not been an issue, however, now it is 
breaking into pieces, presumably from UV deterioration and I need to replace 
that piece of plastic...the Doyle folks say they aren't familiar with the 
piece; there are no sail makers or reps in our area...


anyone have any ideas? thought? suggestions? As always, many thanks!


Richard

s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584.4



Richard N. Bush
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255




___

Thanks everyone for supporting this list with your contributions. Each and 
every one is greatly appreciated. If you want to support the list - use PayPal 
to send contribution -- https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions. Each and 
every one is greatly appreciated. If you want to support the list - use PayPal 
to send contribution -- https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Boom insert

[bushmark4--- via CnC-List]

 Jim, thanks, they don't have it; they suggested the same thing that Russ 
did...have slugs put on the boltrope!

 


Richard

Richard N. Bush Law Offices 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255

 

 

-Original Message-
From: James Hesketh via CnC-List 
To: cnc-list 
Cc: James Hesketh 
Sent: Fri, Aug 10, 2018 12:37 pm
Subject: Re: Stus-List Boom insert



Richard,


One of the best rigging shops in the U.S. is in Miami, give them a call. They 
may have an idea what suppliers C used for spars over the years, or may even 
know what part asking about.


sailingservices.com


Jim Hesketh
Miami, FL
C 26 -- Whisper









 J need help identifying a piece of plastic that is an insert into the slot of 
my boom, (1985 C 37); this piece effectively makes the slot narrower so that 
the sail boltrope fits and stays in the slot.   I have a loose footed main, but 
the sail cover uses that slot (Doyle cradle cover). The insert was on the boat 
when I bought it 4 years ago and has not been an issue, however, now it is 
breaking into pieces, presumably from UV deterioration and I need to replace 
that piece of plastic...the Doyle folks say they aren't familiar with the 
piece; there are no sail makers or reps in our area...



anyone have any ideas? thought? suggestions? As always, many thanks!

 


Richard
s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584.4




Richard N. Bush
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255

 

 








___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Boom insert

[bushmark4--- via CnC-List]

 Russ; good idea; that's probably where we are going to end up...thanks!

 


Richard

Richard N. Bush Law Offices 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255

 

 

-Original Message-
From: Russ & Melody via CnC-List 
To: cnc-list 
Cc: Russ & Melody 
Sent: Fri, Aug 10, 2018 1:25 pm
Subject: Re: Stus-List Boom insert



Hi Richard,

Why not get 1/2 dozen, or so, regular sail slugs that fir the largeropening and 
have them sewn to the Doyle cover? It's not like you need acontinuos bolt rope 
to do the intend job (of holding the bottom of thecover to the boom).

Cheers,Russ
ex-Sweet, 35 mk-1


At 05:47 AM 8/10/2018, you wrote:

J need help identifying a piece ofplastic that is an insert into the slot of my 
boom, (1985 C 37);this piece effectively makes the slot narrower so that the 
sail boltropefits and stays in the slot.   I have a loose footed main, butthe 
sail cover uses that slot (Doyle cradle cover). The insert was on theboat when 
I bought it 4 years ago and has not been an issue, however, nowit is breaking 
into pieces, presumably from UV deterioration and I needto replace that piece 
of plastic...the Doyle folks say they aren'tfamiliar with the piece; there are 
no sail makers or reps in ourarea...

anyone have any ideas? thought? suggestions? As always, manythanks!

Richard
s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584.4


Richard N. Bush
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255


-___

Thanks everyone for supporting this list with your contributions. Eachand every 
one is greatly appreciated. If you want to support the list -use PayPal to send 
contribution --https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions. Each and 
every one is greatly appreciated.  If you want to supportthe list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray





Virus-free. www.avg.com 


 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Boom Insert

[bushmark4--- via CnC-List]

 

 Len; thanks; I called Klacko, guess what? They are closed for vacation... (is 
that allowed?)!


Richard

Richard N. Bush Law Offices 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255

 

 

-Original Message-
From: Len Mitchell via CnC-List 
To: CNC List 
Cc: Len Mitchell 
Sent: Fri, Aug 10, 2018 1:16 pm
Subject: Stus-List Boom Insert

Richard, you could have a different spar but I would try Offshore Spars or 
Klacko Spars and I would bet Dan at Klacko probably provided your mast to C 
originally. Len

Sent from my iPad
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Boom insert

[Russ & Melody via CnC-List]

Hi Richard,

Why not get 1/2 dozen, or so, regular sail slugs that fir the larger 
opening and have them sewn to the Doyle cover? It's not like you need 
a continuos bolt rope to do the intend job (of holding the bottom of 
the cover to the boom).


Cheers, Russ
ex- Sweet, 35 mk-1


At 05:47 AM 8/10/2018, you wrote:
J need help identifying a piece of plastic that is an insert into 
the slot of my boom, (1985 C 37); this piece effectively makes the 
slot narrower so that the sail boltrope fits and stays in the 
slot.   I have a loose footed main, but the sail cover uses that 
slot (Doyle cradle cover). The insert was on the boat when I bought 
it 4 years ago and has not been an issue, however, now it is 
breaking into pieces, presumably from UV deterioration and I need to 
replace that piece of plastic...the Doyle folks say they aren't 
familiar with the piece; there are no sail makers or reps in our area...


anyone have any ideas? thought? suggestions? As always, many thanks!

Richard
s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584.4


Richard N. Bush
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462
502-584-7255


-___

Thanks everyone for supporting this list with your contributions. 
Each and every one is greatly appreciated. If you want to support 
the list - use PayPal to send contribution -- 
https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your 
contributions.  Each and every one is greatly appreciated.  If you 
want to support the list - use PayPal to send contribution 
--   https://www.paypal.me/stumurray



---
This email has been checked for viruses by AVG.
http://www.avg.com
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Boom insert

[Dennis C. via CnC-List]

Richard,

That might be a challenge.  You might start by searching the list
archives.  There have been a few mentions of spar manufacturers.  I suspect
that the key will be the build date of your boat.  That is, C may have
used a single spar supplier in the mid 80's.  Perhaps other owners of mid
80's C will respond.

I know that Touche's mast is a Klacko.  I sent a picture of a cross section
of it with measurements to a couple spar manufacturers.  Fortunately, a
representative of Klacko responded positively.  Doesn't do much for me
since they no longer make that extrusion.

I seem to recall a few owners stating their spars were made by Offshore.

A long shot is to call Rig Rite.  They know a lot about extrusions but
getting to talk to them is always a crapshoot.

Dennis C.



On Fri, Aug 10, 2018 at 11:09 AM bushmark4--- via CnC-List <
cnc-list@cnc-list.com> wrote:

> Joel; thanks; now, how do I find out the manufacturer of my mast? I have
> reviewed all of my purchase contract materials, my surveys, and the photo
> album  and cannot find the name of a manufacturer anywhere...any ideas?
> Thanks again
>
> Richard
> s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584.4
>
> Richard N. Bush
> 2950 Breckenridge Lane, Suite Nine
> Louisville, Kentucky 40220-1462
> 502-584-7255
>
>
> -Original Message-
> From: Joel Aronson via CnC-List 
> To: cnc-list 
> Cc: Joel Aronson 
> Sent: Fri, Aug 10, 2018 10:34 am
> Subject: Re: Stus-List Boom insert
>
> Richard,
>
> It will be specific to the spar manufacturer.
>
> Joel
>
> On Fri, Aug 10, 2018 at 8:48 AM bushmark4--- via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> J need help identifying a piece of plastic that is an insert into the slot
> of my boom, (1985 C 37); this piece effectively makes the slot narrower
> so that the sail boltrope fits and stays in the slot.   I have a loose
> footed main, but the sail cover uses that slot (Doyle cradle cover). The
> insert was on the boat when I bought it 4 years ago and has not been an
> issue, however, now it is breaking into pieces, presumably from UV
> deterioration and I need to replace that piece of plastic...the Doyle
> folks say they aren't familiar with the piece; there are no sail makers or
> reps in our area...
>
> anyone have any ideas? thought? suggestions? As always, many thanks!
>
> Richard
> s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584.4
>
>
> Richard N. Bush
> 2950 Breckenridge Lane, Suite Nine
> Louisville, Kentucky 40220-1462
> 502-584-7255
>
>
> -___
>
> Thanks everyone for supporting this list with your contributions. Each and
> every one is greatly appreciated. If you want to support the list - use
> PayPal to send contribution -- https://www.paypal.me/stumurray
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
> --
> Joel
> 301 541 8551
> ___
>
> Thanks everyone for supporting this list with your contributions. Each and
> every one is greatly appreciated. If you want to support the list - use
> PayPal to send contribution -- https://www.paypal.me/stumurray
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Boom insert

[James Hesketh via CnC-List]

Richard,

One of the best rigging shops in the U.S. is in Miami, give them a call.
They may have an idea what suppliers C used for spars over the years, or
may even know what part asking about.

sailingservices.com

Jim Hesketh
Miami, FL
C 26 -- Whisper



> J need help identifying a piece of plastic that is an insert into the slot
> of my boom, (1985 C 37); this piece effectively makes the slot narrower
> so that the sail boltrope fits and stays in the slot.   I have a loose
> footed main, but the sail cover uses that slot (Doyle cradle cover). The
> insert was on the boat when I bought it 4 years ago and has not been an
> issue, however, now it is breaking into pieces, presumably from UV
> deterioration and I need to replace that piece of plastic...the Doyle
> folks say they aren't familiar with the piece; there are no sail makers or
> reps in our area...
>
> anyone have any ideas? thought? suggestions? As always, many thanks!
>
> Richard
> s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584.4
>
>
> Richard N. Bush
> 2950 Breckenridge Lane, Suite Nine
> Louisville, Kentucky 40220-1462
> 502-584-7255
>
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Boom insert

[bushmark4--- via CnC-List]

 Joel; thanks; now, how do I find out the manufacturer of my mast? I have 
reviewed all of my purchase contract materials, my surveys, and the photo album 
 and cannot find the name of a manufacturer anywhere...any ideas? Thanks again

 


Richard
s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584.4

Richard N. Bush 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255

 

 

-Original Message-
From: Joel Aronson via CnC-List 
To: cnc-list 
Cc: Joel Aronson 
Sent: Fri, Aug 10, 2018 10:34 am
Subject: Re: Stus-List Boom insert



Richard,


It will be specific to the spar manufacturer.


Joel


On Fri, Aug 10, 2018 at 8:48 AM bushmark4--- via CnC-List 
 wrote:


 J need help identifying a piece of plastic that is an insert into the slot of 
my boom, (1985 C 37); this piece effectively makes the slot narrower so that 
the sail boltrope fits and stays in the slot.   I have a loose footed main, but 
the sail cover uses that slot (Doyle cradle cover). The insert was on the boat 
when I bought it 4 years ago and has not been an issue, however, now it is 
breaking into pieces, presumably from UV deterioration and I need to replace 
that piece of plastic...the Doyle folks say they aren't familiar with the 
piece; there are no sail makers or reps in our area...



anyone have any ideas? thought? suggestions? As always, many thanks!

 


Richard
s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584.4




Richard N. Bush
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255

 

 

-___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray






-- 

Joel 
301 541 8551

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Boom insert

[Joel Aronson via CnC-List]

Richard,

It will be specific to the spar manufacturer.

Joel

On Fri, Aug 10, 2018 at 8:48 AM bushmark4--- via CnC-List <
cnc-list@cnc-list.com> wrote:

> J need help identifying a piece of plastic that is an insert into the slot
> of my boom, (1985 C 37); this piece effectively makes the slot narrower
> so that the sail boltrope fits and stays in the slot.   I have a loose
> footed main, but the sail cover uses that slot (Doyle cradle cover). The
> insert was on the boat when I bought it 4 years ago and has not been an
> issue, however, now it is breaking into pieces, presumably from UV
> deterioration and I need to replace that piece of plastic...the Doyle
> folks say they aren't familiar with the piece; there are no sail makers or
> reps in our area...
>
> anyone have any ideas? thought? suggestions? As always, many thanks!
>
> Richard
> s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584.4
>
>
> Richard N. Bush
> 2950 Breckenridge Lane, Suite Nine
> Louisville, Kentucky 40220-1462
> 502-584-7255
>
>
> -___
>
> Thanks everyone for supporting this list with your contributions. Each and
> every one is greatly appreciated. If you want to support the list - use
> PayPal to send contribution -- https://www.paypal.me/stumurray
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>

-- 
Joel
301 541 8551
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Boom insert

[bushmark4--- via CnC-List]

 J need help identifying a piece of plastic that is an insert into the slot of 
my boom, (1985 C 37); this piece effectively makes the slot narrower so that 
the sail boltrope fits and stays in the slot.   I have a loose footed main, but 
the sail cover uses that slot (Doyle cradle cover). The insert was on the boat 
when I bought it 4 years ago and has not been an issue, however, now it is 
breaking into pieces, presumably from UV deterioration and I need to replace 
that piece of plastic...the Doyle folks say they aren't familiar with the 
piece; there are no sail makers or reps in our area...



anyone have any ideas? thought? suggestions? As always, many thanks!

 


Richard
s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584.4




Richard N. Bush
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255

 

 

-___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray