Anyone porting this beast to the Openmoko (preferred SHR)?
Nikolaus
Am 17.01.2010 um 09:26 schrieb i...@fosdem.org:
In an effort to make FOSDEM even more paperless, there is now an
iPhone
application with the FOSDEM schedule. The application has a few
features that
make it nicer to
2010/1/16 Radek Polak pson...@seznam.cz:
You have to make binding for it. It's just like any other key (displayed on
the top of the keyboard picture).
Hope it helps
Regards
Radek
Thanks, it helped.
___
Openmoko community mailing list
2010/1/13 Radek Polak pson...@seznam.cz:
i have just finished porting of spectemu[1] to Qt and Freerunner.
Thanks. I have to check how my BASIC programs from ca. 1989-1990 work
on my Neo :)
-Timo
___
Openmoko community mailing list
Yann SLADEK wrote:
Hi Radek,
I found why I got this error, Karmic Koala has only QT 4.5.3. So I used
a PPA to get QT 4.6 and try to compile again.
I got another error immediatly after the 'make' althought before 'make'
was returning an error maybe 10 minutes after starting
Hi folks,
The link on openmoko.org to Qt Extended 4.4.3
(http://dashi-x02.karadog.net/~lihouyu/qtextended/4.4.3/) seems to be
down at the moment — do you know of anywhere else I can find it?
___
Openmoko community mailing list
Hi, thank you for your interesting in Qt Extended, but it's not
available now. Please refer to QtMoko. Thanks...
On Sun, Jan 17, 2010 at 9:15 PM, Åsmund Stavdahl smu...@gmail.com wrote:
Hi folks,
The link on openmoko.org to Qt Extended 4.4.3
2010/1/16 arne anka openm...@ginguppin.de:
looks, like the neither the modules nor the kernel itself do contain the
ar6000 driver necessary ...
--
You have to load 2 modules to enable wifi - s3cmci and ar6000.
as stated above, at least ar6000 is simply missing.
I have no sign of ar6000
Hi, I'm a new neo freerunner user, I installed Qtmoko v16B on the NAND.
I have few questions:
1) From http://activationrecord.net/radekp/qtmoko/
You should have FAT as first partition and swap on /dev/mmcblk0p4. Can be
changed in /etc/fstab
It is necessary to create a swap partion on the SD if I
I have no sign of ar6000 either - i.e. 'find /lib/modules -name
ar6*' gives no results, and 'lsmod' doesn't mention ar6000. But my
wifi is working all the same. I guess that means it's built into
Timo's kernel.
well, that's what i checked the config for ... and while looking for the
link
Joif wrote:
Hi, I'm a new neo freerunner user, I installed Qtmoko v16B on the NAND.
Hi :)
I have few questions:
1) It is necessary to create a swap partion on the SD if I use Qtmoko on the
NAND?
No it's not necessary, but it can help if you are using some memory hungry
apps.
2) I prefer
Hi,
a non-original microSD card that I bought doesn't perform too well in
my wikireader. the non-orig card is a type '6' like the orig (I think),
and scan_sd's at 129k like the orig, but sometimes it's slow/erratic
when copying files from my laptop.
possibly the non-orig card is just crap...
Am Samstag, den 16.01.2010, 16:19 +0100 schrieb arne anka:
every time after switching to a runlevel w/o X there's still one process
left:
/usr/lib/enlightenment/modules/battery/linux-gnueabi-arm-ver-svn-05/batget
64
and it's not even reused when restarting X, but a new one will be
if anyone is keen to get wikiquotes on their wikireader then this
one-liner sed script will reformat enwikiquote-*-pages-articles.xml
so that its articles and references come up as title (wikiquote).
sed 's+/title+ (wikiquote)/title+;s+text
.*#redirect.*\[\[.*\]\]+__MAGIC__+;s+text
2010/1/17 Joif fdvj...@vodafone.it:
7) issues with v16b: after a suspend the devtools do not work properly,
it's impossible to turn on GPS, Wifi, Bluetooth and also the bar at the
bottom of the screen (with the menu and green arrow) doesn't work properly
(clicking the green arrow open or
thanks for the answer!
Radek Polak wrote:
1) It is necessary to create a swap partion on the SD if I use Qtmoko on
the
NAND?
No it's not necessary, but it can help if you are using some memory hungry
apps.
and what about its dimension and file system (ext2?)? I have a 8 GB Kingston
Radek Polak wrote:
2) I prefer that GPS, bluetooth and wifi don't start automatically at the
boot, wich file I have to edit to do that?
You can add in /etc/inid.d/qpe.sh
echo 0 /sys/bus/platform/devices/neo1973-pm-gps.0/power_on
echo s3c2440-sdi
Hi all,
I'm using QtMoko V17 (great work, folks!), and I'm searching for a way to
update maps of TangoGPS, which is running in QX...
thanks ;)
--
Francesco de Virgilio
*Ubuntu-it team member*
mailto:frad...@ubuntu-it.org
http://wiki.ubuntu-it.org/FrancescoDeVirgilio
*Wikimedia projects
Hi,
Am Sonntag 17. Januar 2010 20:04:20 schrieb fradev...@gmail.com:
Hi all,
I'm using QtMoko V17 (great work, folks!), and I'm searching for a way to
update maps of TangoGPS, which is running in QX...
Have a look at http://wiki.openmoko.org/wiki/Yaouh!
Greetings, Carsten
--
Hier ist
David Wagner wrote:
hab keen oh ne a écrit :
You could extrakt the ipkg file and move the binary to /usr/bin. Otherwise
you could install the debian package, which should soon be available in the
Hackable:1 feeds.
It will be available tomorrow at
I don´t know why, but I have very bad battery life with one of the recent
shr-testing. About 20hrs of suspend time, with gsm off. Does anyone know
what can be the issue?
2010/1/16 William Kenworthy bi...@iinet.net.au
I was able to overcome it by stopping phonefsod. And when I restarted
Hi all,
I'm using QtMoko V17 (great work, folks!), and I'm searching for a way to
update maps of TangoGPS, which is running in QX...
I'm a Shr user but I think it will run with QtMoko.I use Yaouh!
http://wiki.openmoko.org/wiki/Yaouh
___
Openmoko
* joa...@verona.se joa...@verona.se [17.01.2010 07:45]:
Would it be possible to attach a secondary phone over BT to the
Freerunner and controll it with FSO, the same way as the inbuilt phone
device?
--
Joakim Verona
___
Openmoko community
Margo wrote:
I also have some problems with v16b version of qtmoko.
1) can't connect to wifi using the internet settings menu. First it
said Wireless LAN unavailable and there was no WLAN detection
option in the menu. After many reboots it said Wireless LAN offline
(as it should) and it
Joif wrote:
EDIT: it seems that a more determined click on the icon make the devtools
work :D
I plan better feedback, but it's on very long list :)
Ah, I forgot another issue: yesterday I sent a long sms but receiving an
error every time I tried to send it, but the recipient received
Frederik Sdun frederik.s...@googlemail.com writes:
* joa...@verona.se joa...@verona.se [17.01.2010 07:45]:
Would it be possible to attach a secondary phone over BT to the
Freerunner and controll it with FSO, the same way as the inbuilt phone
device?
I think over bluetooth is not possible.
Hi,
ok, thanks Radek, it's building now.
But, despite following what has been written into the wiki (adding
'-languages fr_FR*' *into configure-common file or '--add-language
fr_FR' to configure command after creating the right folder)* *, I have
no .ts file created.
Regards,
Yann
Yann
Radek Polak pson...@seznam.cz writes:
just little notice. Without debug stuff and preempt, Freerunner is now
capable
of playing ogg videos in 320x240 on framebuffer without frames dropped.
Sounds very cool. Were you using tremor to decode the audio?
Yann SLADEK wrote:
ok, thanks Radek, it's building now.
But, despite following what has been written into the wiki (adding
'-languages fr_FR*' *into configure-common file or '--add-language
fr_FR' to configure command after creating the right folder)* *, I have
no .ts file created.
You will
Timo Juhani Lindfors wrote:
Sounds very cool. Were you using tremor to decode the audio?
I think it's using ffmpeg. Anyway it's mplayer from debian stable and in my
~/.mplayer/config are these lines:
[default]
afm=ffmpeg
vfm=ffmpeg
Regards
Radek
Radek Polak pson...@seznam.cz writes:
I think it's using ffmpeg. Anyway it's mplayer from debian stable and in my
~/.mplayer/config are these lines:
With mplayer from debian unstable videos created with
ffmpeg2theora -x 320 -y 240 --videoquality 3 --speedlevel 2 --audioquality 3
--samplerate
I have switched to using QTMoko, currently running V16b and I cannot
seem to get the call volumes right. Caller is not loud enough and
caller struggles to hear me. do I need to fiddle with teh
gsmhandset.state file manually or is there a better way ? I have a
GTA02 A05 with buzzfix. Anyone have a
i just stumbled upon this screenshot [1]
could whoever took it elaborate?
br
[1] http://scap.linuxtogo.org/files/cf45ae4ee48f88d6f74504253f905843.png
___
Openmoko community mailing list
community@lists.openmoko.org
On Mon, 18 Jan 2010 02:30:16 +0100 Bernd Prünster bernd.pruens...@gmail.com
said:
i just stumbled upon this screenshot [1]
could whoever took it elaborate?
br
[1] http://scap.linuxtogo.org/files/cf45ae4ee48f88d6f74504253f905843.png
illume is being worked on in svn... if u havent noticed.
Carsten Haitzler (The Rasterman) wrote:
illume is being worked on in svn... if u havent noticed. hell e27 even has a
compositor module - really nice and simple one too that should work reliably
as
it requires no acceleration to work - i need to add acceleration as an option
next.
read
On Sun, 2010-01-17 at 14:24 +, Neil Jerram wrote:
2010/1/16 arne anka openm...@ginguppin.de:
looks, like the neither the modules nor the kernel itself do contain the
ar6000 driver necessary ...
--
You have to load 2 modules to enable wifi - s3cmci and ar6000.
as stated
On Mon, 18 Jan 2010 02:49:58 +0100 Bernd Prünster bernd.pruens...@gmail.com
said:
Carsten Haitzler (The Rasterman) wrote:
illume is being worked on in svn... if u havent noticed. hell e27 even has a
compositor module - really nice and simple one too that should work
reliably as it
Carsten Haitzler (The Rasterman) wrote:
i dont know how recent shr's build is - but in the wizard - select the
illume-home profile. that is the one that sets your config up right for
illume2
+friends
That was it! works under shr... it is quite awesome, some rough edges of
course, but
Paul Fertser fercer...@gmail.com writes:
Frederik Sdun frederik.s...@googlemail.com writes:
* joa...@verona.se joa...@verona.se [17.01.2010 07:45]:
Would it be possible to attach a secondary phone over BT to the
Freerunner and controll it with FSO, the same way as the inbuilt phone
device?
Wish: ability to copy from the Notes etc, and inserts in Dialer etc.
-
Thank you for your attention.
--
View this message in context:
http://n2.nabble.com/QtMoko-QtMoko-v16B-few-questions-and-issues-tp4408446p4412033.html
Sent from the Openmoko Community mailing list archive at Nabble.com.
Hi all,
I will attend FOSDEM 2010 and give a talk about experiments with
GNUstep running on the Freerunner. Here is the schedule:
http://fosdem.org/2010/schedule/events/gnustep_porting_quantumstep
But since I am sure there are many more attendants and activities, I
have started a
Denis Johnson wrote:
I have switched to using QTMoko, currently running V16b and I cannot
seem to get the call volumes right. Caller is not loud enough and
caller struggles to hear me. do I need to fiddle with teh
gsmhandset.state file manually or is there a better way ? I have a
GTA02 A05
Risto H. Kurppa wrote:
Do you use FR as your daily/primary phone?
Yes.
Do you use FR as your primary PDA?
Yes.
What distribution you run most of the time?
I use only QtMoko.
--
Sometimes I forget how to do small talk: http://xkcd.com/222/
“If you have to ask why, you’re not a member
42 matches
Mail list logo
