Found a show stopper for the Feb 20 Image
Invalid Magic While Ipkg install gllin_1.0+r350-r0_fic-gta01.ipk
___
OpenMoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
As it would seem Bluetooth HID as a service is not implemented at this time. I
found some code to do this, but Im not so good at porting code. If someone
would be willing to cross compile this that would be great.
http://anselm.hoffmeister.be/computer/hidclient/hidclient.c
My GTA01 will be for sale soon, I know there is no official date for the GTA02
but if i can get an unofficial answer from an official source on if it looks
good or bad for march, same for April. This will dictate when my Neo gets
listed
Michael Shiloh [EMAIL PROTECTED] 02/19/08 6:42 PM
Yes I know how to use a HID just need to know how to set the Neo into HID
mode(e.g act as a Input Device)
kenneth marken [EMAIL PROTECTED] 02/18/08 1:17 PM
On Monday 18 February 2008 18:54:17 Shawn Rutledge wrote:
On Feb 18, 2008 10:31 AM, Christopher Earl [EMAIL PROTECTED] wrote:
I want my
to me because I need such a keyboard.
Thanks,
Michael
Christopher Earl wrote:
I bought a PS3 wireless keyboard, this BTKB has a mouse pad and buttons, its
a full qwerty keyboard. This Works Great with the GTA01, the mouse pad even
works, only issue is that it has a timeout that causes moko
apt-get install gpsd
Audrius Meskauskas [EMAIL PROTECTED] 02/17/08 6:09 AM
#!/bin/sh
killall ld-linux.so.2
The installation fails with the message:
ERROR: Cannot satisfy the following dependencies for tangoGPS:
libgps16 (= 2.34)
Any ideas where this library is and how to get it? I
Ha Ha Yup, guess you can tell who uses Debian
Tim Knapp [EMAIL PROTECTED] 02/17/08 5:22 PM
On Sun, 2008-02-17 at 16:08 -0500, Christopher Earl wrote:
apt-get install gpsd
Don't you mean ipkg install gpsd :)
-Tim
Audrius Meskauskas [EMAIL PROTECTED] 02/17/08 6:09 AM
#!/bin/sh
killall
I bought a PS3 wireless keyboard, this BTKB has a mouse pad and buttons, its a
full qwerty keyboard. This Works Great with the GTA01, the mouse pad even
works, only issue is that it has a timeout that causes moko to disconnect ,
which i will fix with a script. just thought I would let everyone
Ian,
There is a good possibility that your neo is in deep discharge. Plug it
into the USB port and let it charge a couple hours, then try and boot it, dont
press the power before at least an hour, if you have pressed the power button,
remove the battery for 5 seconds and replace it,
/08 5:10 PM
Hi Christopher, and the entire community,
Christopher Earl wrote:
I read the Raiders Realm interview with Michael Shiloh Here is the excerpt I
will am talking about
RR: So is all of the hardware you have for this FCC certified and ready to
use on different networks?
MS: Yup
possible
to change the hardware in a GTA01 to support the 850 Mhz band. The
best option you have is probably to sell your GTA01 and get a GTA02
that supports 850 Mhz when they become available.
Ortwin
On 2/12/08, Christopher Earl [EMAIL PROTECTED] wrote:
I read the Raiders Realm interview
I read the Raiders Realm interview with Michael Shiloh Here is the excerpt I
will am talking about
RR: So is all of the hardware you have for this FCC certified and ready to use
on different networks?
MS: Yup. Absolutely. Now it is a GSM based phone, both models, which means
they both use a
A 0.8x1.6 cell delivers 0.3 amps @0.55 VDC if you do the math, ~10 would be
needed for the right voltage. Obviously some control is needed. IF this was
made the remaining voltage could be used to power the device while not
consuming much power from the battery. This could add a significant
, Christopher.
Michael
Christopher Earl wrote:
Michael,.
I swaer to god I would be there if i didnt live in Ohio, you get
me to LA and ill go LOL
Michael Shiloh [EMAIL PROTECTED] 02/06/08 5:19 PM
I should point out that these are full access passes, entitling you to
attend
anyone know where I can cut the Microphone Gain? If its in the alsamixer whats
the label??
Joe Pfeiffer [EMAIL PROTECTED] 02/08/08 10:11 AM
Jonathan Spooner writes:
So you want to patent any unique tech in the neo to prevent some scum
from patenting your ideas then taking openmoko to court?
I think he had the right intentions about this idea, however it would require
vast CPU resources or a coprocessor dedicated to firware/driver layer
managment. This is unlikley to happen, However trying to unlock the virtual
lips of companies would be a huge step forward. Not to play devils
When you port Dfu-util to windows keep all the switches the same(not that i
thought you would change them) and I can write the UI this weekend, It will
call on dfu-util, so any changes to dfu can be easily applied to the UI without
the need to recode anything, let me know the name of your
Forgot to add this link. This will outline the American procedure for patenting.
http://www.inventionpatent.net/patent/process.cfm
Steven Milburn [EMAIL PROTECTED] 02/07/08 5:35 PM
As a first step, get anything you think is patent worthy documented and
dated. In the US, a common practice is
www.openmoko.com
Today I noticed a change that OM has released their CAD files for the case of
the GTA01, This opens a major door to Case modding. I guess im used to closed
hardware and tight-liped companies, but i was supprised. I will never again own
a closed phone.
of having a few different
designs made.
Steven Le Roux [EMAIL PROTECTED] 02/06/08 9:53 AM
On Wed, 06 Feb 2008 07:59:01 -0500, Christopher Earl [EMAIL PROTECTED]
wrote:
www.openmoko.com
Today I noticed a change that OM has released their CAD files for the case
of the GTA01, This opens a major
I said very slightly
Ben Burdette [EMAIL PROTECTED] 02/06/08 11:57 AM
So what is it that is different from the old spec? Is it just the 850
mhz version?
Christopher Earl wrote:
the specs have changed (very slightly)
* Atheros 802.11 b/g WiFi
* Samsung S3C2442 B54 SoC @ 400Mhz
* SMedia
Marcus,
Where is the config located , stupid new unstable OM image has a
new OSKB with no slashes
Marcus Bauer [EMAIL PROTECTED] 02/05/08 4:53 AM
On Tue, 2008-02-05 at 08:58 +0100, jan korinek wrote:
Very good!!! fast and working. Is there a way to predownload some maps
in
I found this update on the GTA02 wiki and thought I would share it.
GTA02v5 design finalized - DONE
GTA02v5 small number produced for OpenMoko internal developer evaluation - Done
(around 20)
GTA02v5 thorough evaluation by OpenMoko internal developers - In progress
Also, I think it would be
the specs have changed (very slightly)
* Atheros 802.11 b/g WiFi
* Samsung S3C2442 B54 SoC @ 400Mhz
* SMedia Glamo3362 Graphics Accelerator
* 2x ST 3D Accelerometers
* 256MB Flash
* 128MB SDRAM
* 2MB NOR Flash
* 1200mAh Battery
* 2 LEDs illuminating the two buttons.
* u-blox/Atmel ATR0635 GPS
*
http://wiki.openmoko.org/wiki/Repositories
[EMAIL PROTECTED] 02/05/08 9:13 AM
Qtopia download images and the latest OpenMoko images ?
Thx
___
OpenMoko community mailing list
community@lists.openmoko.org
Add a powered Hub, and there you go, also somewhere on the Wiki is how to Mod
the GTA01 to add Bus power
Mikko J Rauhala [EMAIL PROTECTED] 02/05/08 11:21 AM
On ti, 2008-02-05 at 16:01 +, JW wrote:
if you are talking about GTA01 then there is no host mode (I believe).
Bzzt, there is,
Thats whats listed in the WiKi
Denis [EMAIL PROTECTED] 02/05/08 5:08 PM
1200mAh battery? Is it a mistake?! It use to be 1700mAh! I think
1200mAh is too few for 400 mhz CPU, wi-fi and everything...
2008/2/5, Christopher Earl [EMAIL PROTECTED]:
the specs have changed (very slightly)
* Atheros
Maybe a typo in the GTA02 hardware wiki, here is the link
http://wiki.openmoko.org/wiki/Neo1973_GTA02_Hardware
Denis [EMAIL PROTECTED] 02/05/08 8:04 PM
The wiki history showes that Feb, 3rd it still was 1700mAh. Can
anybody from OpenMoko confirm whether it is correct?
May i suggest a button to A) stop trails and b) always auto center/follow. Good
work though
Ian Darwin [EMAIL PROTECTED] 02/04/08 8:00 AM
Marcus Bauer wrote:
Quick answer: on a N810 you are happier with maemo-mapper, on the Neo
with tangogps. You have more buttons on the N810 and a
. /etc/profile
export OM=/home/john/moko
export PATH=$OM/build/tmp/cross/arm-angstrom-linux-gnueabi/bin:$PATH
export
PKG_CONFIG_PATH=$OM/build/tmp/staging/arm-angstrom-linux-gnueabi/lib/pkgconfig
echo Type exit to leave cross compilation environment.
/bin/bash
On 01/02/2008, Christopher Earl
Hope someone here can be of assistance. I want to develop apps for OM without
using qemu or xoo or any of the other convoluted methods for application
development. is there any easy way of developing apps on my desktop and compile
it for OM, i was hoping that it would be simple gcc switches but
PKG_CONFIG_PATH=$OM/build/tmp/staging/arm-angstrom-linux-gnueabi/lib/pkgconfig
echo Type exit to leave cross compilation environment.
/bin/bash
On 01/02/2008, Christopher Earl [EMAIL PROTECTED] wrote:
Hope someone here can be of assistance. I want to develop apps for OM
without using qemu
to transfer files to the device use scp file [EMAIL PROTECTED]:/location
ian chu [EMAIL PROTECTED] 02/01/08 12:32 PM
Hello~
I have two simple questions about Openmoko develop.
Is it correct to transfer our projects ( like GPS ) from PC to
Openmoko by dfu ? and how? scp?
and should I flash
Porting all the Linux stuff to OSX should be pretty easy afterall , OSX is just
a Unix clone too
Peter Lyle [EMAIL PROTECTED] 02/01/08 7:00 PM
I'm in a very similar situation as described below.
Although I think the situation just got a lot more complicated with Nokia's
acquisition of
A BT control center would be great, that is needed for sure
Brad Midgley [EMAIL PROTECTED] 01/31/08 7:18 PM
doh
there does need to be a conrol panel for neo for pairing
sorry, being lazy. a control panel is needed just for openmoko. :)
--
Brad
Ok everone, I got the Handset today and GSM 850 WORKS! Audio sounds good and
Test call was a success. I will be sending the phone off to its next stop soon.
Thanks to Michael Shiloh for arranging the test and i hope this leads to good
things for the 850Mhz band
I like the unstable OM images from 1/27/08 if your not in a GSM 800 area this
should work for you
andy [EMAIL PROTECTED] 01/28/08 4:19 PM
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Guys,
I don't want to start a whole I've just bought a neo - what do I do
thread.. so I'm going to keep
you can do calls with asterisk, its just all console for now the command is
'console dial [EMAIL PROTECTED]'
and it is also a server
Colan Schwartz [EMAIL PROTECTED] 01/30/08 11:47 AM
On Tue, Jan 29, 2008 at 06:13:17PM -0700, Jeremiah Flerchinger wrote:
Has anyone who actually has hardware
may as well just wait for the asterisk GUI cause OM uses GTK not QT so it would
require some serious editing, however the serverless idea is good
Michael Schmidt [EMAIL PROTECTED] 01/30/08 12:00 PM
the serverless instant messenger http://retroshare.sf.net (Qt gui)
will have soon as well VOIP
secure VOIP, then go the way for an adjusted gui for
the PGP-Messenger with soon Voip... and as it is not in, but the launch of
OM is soon, ... if someone gets the flu, then use Qt still, as this might be
quicker done... and Voip can be added later as an update...
On Jan 30, 2008 6:06 PM, Christopher
the GTA02 will provide 5v at 100mA on the USB
Tilman Baumann [EMAIL PROTECTED] 01/30/08 1:27 PM
Jeff Andros wrote:
On Jan 30, 2008 6:07 AM, Tilman Baumann [EMAIL PROTECTED] wrote:
snip
This is a usual question. Although you could configure the USB port in
host mode. It would be unpowered.
, 2008 9:11 AM, Tim Shannon [EMAIL PROTECTED] wrote:
That's great. I really hope those handsets are available at the same time
as the 900 band phones.
On Jan 28, 2008 8:03 PM, Christopher Earl [EMAIL PROTECTED] wrote:
Ok everone, I got the Handset today and GSM 850 WORKS! Audio sounds good
PM, Lally Singh [EMAIL PROTECTED] wrote:
Whoops, I meant RAM (128 mb on the current unit).
Yeah, I was afraid it was just the two. At least t-mob's been good to
me in the past.
On Jan 30, 2008 10:48 PM, Christopher Earl [EMAIL PROTECTED] wrote:
Upgrading the Memory is not a problem, just
43 matches
Mail list logo