Hi Martix, thank you for the reply. > Hi, > I had this problem few months ago. > You should flash u-boot to NAND by nandwrite and run "dynpart" and > "dynenv set u-boot_env" in NAND u-boot console. > see: http://wiki.openmoko.org/wiki/Nandwrite > Then you can flash all partitions (including NAND u-boot) via dfu-util > from running NAND u-boot.
> > the issue described at > > http://docs.openmoko.org/trac/ticket/2348 I think we have different cases. In my case dfu-util downloads/uploads fine if you name the partition right. But it didn't list the partitions with dfu-util --list as it was in ran time mode. The partitions have different names in dfu-util/u-boot/qi so I didn't know how to upload(FR->PC) 'identity-ext2'(qi name) partition. I'v found a workaround dfu-util -a non-existent-partition -U anyfile dfu-util says bad words you on PC console FS screens says 'bla bla switching to DFU mode' dfu-util --list Found DFU: [0x1d50:0x5119] devnum=76, cfg=0, intf=0, alt=0, name="RAM 0x32000000" Found DFU: [0x1d50:0x5119] devnum=76, cfg=0, intf=0, alt=1, name="u-boot" Found DFU: [0x1d50:0x5119] devnum=76, cfg=0, intf=0, alt=2, name="u-boot_env" Found DFU: [0x1d50:0x5119] devnum=76, cfg=0, intf=0, alt=3, name="kernel" Found DFU: [0x1d50:0x5119] devnum=76, cfg=0, intf=0, alt=4, name="splash" Found DFU: [0x1d50:0x5119] devnum=76, cfg=0, intf=0, alt=5, name="factory" Found DFU: [0x1d50:0x5119] devnum=76, cfg=0, intf=0, alt=6, name="rootfs" _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community