Radek Polak píše v Út 11. 01. 2011 v 22:20 +0100:
Hrabosh wrote:
I set the controls as you wrote and made a call to test it.
I found out that if my phone is ringing and I press Answer button, the
call is not answered, but dropped! After cca 1s, person who is calling
gets busy tone
I set the controls as you wrote and made a call to test it.
I found out that if my phone is ringing and I press Answer button, the
call is not answered, but dropped! After cca 1s, person who is calling
gets busy tone and I get missed call
I'm not able to receive calls !
Zbynek.
Hrabosh wrote:
I set the controls as you wrote and made a call to test it.
I found out that if my phone is ringing and I press Answer button, the
call is not answered, but dropped! After cca 1s, person who is calling
gets busy tone and I get missed call
I'm not able to receive
2011-01...@22:20 Radek Polak
Its probably not related to setting alsa controls. Is it always reproducible?
I had problems that the answer button after click becomes hang call
button
and you can very easily click twice. It's my plan to fix this somehow in
future.
on this topic I
Hrabosh zbynecek at volny.cz writes:
9/ People I call with are complaining about bad sound quality. Did it
happen to any of you?
Your Openmoko needs a BuzzFix for details see:
http://wiki.openmoko.org/wiki/Buzz_Fix
keep on
Willhelm
___
Le 31.12.10 01:05, Hrabosh a écrit :
9/ People I call with are complaining about bad sound quality. Did it
happen to any of you?
For me it was enough to use the following settings in NeoControl:
Playback: 125
Sidetone: 3
Mic2: 1
I nearly threw away my phone before finding out these
2010/12/31 Hrabosh zbyne...@volny.cz:
Hello guys,
I got my FreeRunner few weeks ago and since that I'm having fun
discovering it :-)
Hi and welcome to Openmoko community!
9/ People I call with are complaining about bad sound quality. Did it
happen to any of you?
Do people on other
Thanks for reply. Please see my notes below..
Radek Polak píše v So 01. 01. 2011 v 12:14 +0100:
Hrabosh wrote:
Hello guys,
I got my FreeRunner few weeks ago and since that I'm having fun
discovering it :-)
I am having this fun already for 2 years, Freerunner is certainly best
Thank you.
Tommorow at work I'll try to make a call from my desk phone to FR to
determine what people mean by where the hell are you calling from?.
I hope I can do buzzfix by myself. I work in Honeywell design center as
HW desing eng. so I have some experince with soldering :-) and we have
very
Hrabosh wrote:
Hrabosh: It works! Thanks! But media player seems not to be able to play
music fluently when phone is in use (reading SMS, using Arora... ) -
QMplayer is playing fluently no matter what you do with the phone.
It used to be even worse ;-) There must be something setup wrong.
Hrabosh wrote:
Hello guys,
I got my FreeRunner few weeks ago and since that I'm having fun
discovering it :-)
I am having this fun already for 2 years, Freerunner is certainly best toy i
ever had :)
1/ USB Host is not working in v30, v31 (in v26 is). Dmesg says unable
to enumerate
Thank you ! Please see my comments inside...
Alishams Hassam píše v Čt 30. 12. 2010 v 18:04 -0800:
On Thursday 30 December 2010 16:05:03 Hrabosh wrote:
1/ USB Host is not working in v30, v31 (in v26 is). Dmesg says unable
to enumerate device. I was trying to connect USB flash drive, BT
1/ USB Host is not working in v30, v31 (in v26 is). Dmesg says unable
to enumerate device. I was trying to connect USB flash drive, BT dongle
and USBtoRS232 converter (With PL2??something chip) - all these were
working on v26.
The FreeRunner's USB port can be switched from device to host
Stefan Monnier monn...@iro.umontreal.ca writes:
The FreeRunner's USB port can be switched from device to host separately
on the data and power pins, so my guess is that you set its data pins to
host mode but left the power in device mode, which means that the FR
will not provide power via USB
Hello guys,
I got my FreeRunner few weeks ago and since that I'm having fun
discovering it :-)
I had been trying OM, SHR, Debian, Android, QtMoko and decided to stay
with Qtmoko. I have v26,v30 and now v31 installed on several uSD cards
(v31 is in NAND memory).
Although QtMoko seems
On Thursday 30 December 2010 16:05:03 Hrabosh wrote:
1/ USB Host is not working in v30, v31 (in v26 is). Dmesg says unable
to enumerate device. I was trying to connect USB flash drive, BT dongle
and USBtoRS232 converter (With PL2??something chip) - all these were
working on v26.
not sure,
16 matches
Mail list logo