> I'm currently having difficulties connecting to the Neo Freerunner (running
> OM2009) from Ubuntu 9.04.
On ubuntu 9.04 I have found that USB networking only works after rebooting my
desktop. Other than that I have had no problems connecting
--
Adolph J. Vogel BEng(Hons)
windows, Linux gives you the whole house.
> From: ch...@csamuel.org
> To: community@lists.openmoko.org
> Date: Sun, 9 Aug 2009 14:07:04 +1000
> Subject: Re: Unabel to SSH into Neo Freerunner
>
> On Sun, 9 Aug 2009 06:08:12 am Niels Heyvaert wrote:
>
> > Basically
On Sun, 9 Aug 2009 06:08:12 am Niels Heyvaert wrote:
> Basically these were the same steps I was already doing (except I need to
> modprobe g_ehter first).
Um, don't you mean cdc_ether ? That's what I'm using..
--
Chris Samuel : http://www.csamuel.org/ : Melbourne, VIC
This email may co
u the whole house.
> From: dfokk...@ileos.nl
> To: community@lists.openmoko.org
> Date: Sat, 8 Aug 2009 22:37:27 +0200
> Subject: RE: Unabel to SSH into Neo Freerunner
>
> On Sat, 2009-08-08 at 20:08 +, Niels Heyvaert wrote:
>&
On Sat, 2009-08-08 at 20:08 +, Niels Heyvaert wrote:
> Hi there,
>
> So far no luck with getting an SSH connection to the FreeRunner.
>
> I've followed the wiki man pages to the letter
> (http://wiki.openmoko.org/wiki/USB_Networking) as Angus suggests. But
> this did not change the result.
moko.org
> To: community@lists.openmoko.org
> Date: Fri, 7 Aug 2009 08:44:16 -0600
> Subject: Re: Unabel to SSH into Neo Freerunner
>
> On August 6, 2009 09:07:40 pm c_c wrote:
>> Hi,
>> I also get the following error :-
>>
>> usb 2-2: new full speed USB device using
On Fri, 7 Aug 2009 01:37:00 pm Mikhail Umorin wrote:
> AFAIK android does not have ssh server. you can use adb to connect.
You're quite correct, Tom will need to do "adb shell" instead.
cheers,
Chris
--
Chris Samuel : http://www.csamuel.org/ : Melbourne, VIC
This email may come with a PGP
On Thu, Aug 06, 2009 at 09:56:04PM -0500, c_c wrote:
> It's been a little flaky for me too after the last two SHR-U updates.
> unplugging and re-plugging seems to work every 3rd plug or so. But doesn't
> last long. Had a tough time upgrading yesterday to latest SHR-U.
> Any Ideas?
FWIW, of
On August 6, 2009 09:07:40 pm c_c wrote:
> Hi,
> I also get the following error :-
>
> usb 2-2: new full speed USB device using ohci_hcd and address 7
> usb 2-2: configuration #1 chosen from 2 choices
> eth1: register 'cdc_ether' at usb-:00:0b.0-2, CDC Ethernet Device,
> 00:1f:11:01:2a:26
i have serious issues, to distinguish what you do on your pc and what on
the freerunner.
the pc should have ip .200 and the fr .202.
so, please explain more carfully what you are doing and mention the
distribution you are using on your fr.
___
Openm
On Fri, 2009-08-07 at 01:12 +, Niels Heyvaert wrote:
> Hi,
>
> I'm currently having difficulties connecting to the Neo Freerunner (running
> OM2009) from Ubuntu 9.04.
>
> Initially I did not get the usb0 ethernet connection when plugging in the
> booted device, so I used
Correct. Om2009
On Thursday 06 August 2009 21:48:48 tom wrote:
> mhh, i dont know what to do,
> - latest ubuntu
> - android 1.5 alpha
AFAIK android does not have ssh server. you can use adb to connect. check
http://wiki.openmoko.org/wiki/Android_usage
Mikhail.
___
Op
and then it disappears after a few seconds...seems like after the
gnome-network-manager couldnt establish a connectiion...
argh..
On Thu, Aug 6, 2009 at 11:11 PM, tom wrote:
> eth1 shows up additional after a freerunner-boot while connected. but it
> didnt get an ip
> ...
>
>
___
eth1 shows up additional after a freerunner-boot while connected. but it
didnt get an ip
...
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Hi,
I also get the following error :-
usb 2-2: new full speed USB device using ohci_hcd and address 7
usb 2-2: configuration #1 chosen from 2 choices
eth1: register 'cdc_ether' at usb-:00:0b.0-2, CDC Ethernet Device,
00:1f:11:01:2a:26
eth1: no IPv6 routers present
Something to do wi
What does dmesg on the host side tell you when you plug the device in. After
the first boot it should show up as ethx.
Angus
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Hi,
It's been a little flaky for me too after the last two SHR-U updates.
unplugging and re-plugging seems to work every 3rd plug or so. But doesn't
last long. Had a tough time upgrading yesterday to latest SHR-U.
Any Ideas?
--
View this message in context:
http://n2.nabble.com/Unabel-to-SS
is the interface usbX or ethX? (on both pc and freerunner)
tom wrote:
> mhh, i dont know what to do,
> - latest ubuntu
> - android 1.5 alpha
> cant ping it, ip (200) seems to be there (local), though the
> ubuntu-network-manger cant connect to it...
> regardless what i specify in /etc/interface fo
mhh, i dont know what to do,
- latest ubuntu
- android 1.5 alpha
cant ping it, ip (200) seems to be there (local), though the
ubuntu-network-manger cant connect to it...
regardless what i specify in /etc/interface for usb0.
are there any "checklists"? hints?
thx
__
no, i cant ping it...think i was too fast. having trouble with usb0 / latest
ubuntu
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
On August 6, 2009 07:38:25 pm tom wrote:
> im basically having the same, though my machine says:
> connection refused
> ideas?
Connect refused is a different problem . Can you ping the ip address of the FR?
Have you changed the dropbear config on the FR side ?
Angus
___
im basically having the same, though my machine says:
connection refused
ideas?
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
On Thu, Aug 6, 2009 at 6:12 PM, Niels Heyvaert wrote:
> Hi,
>
> I'm currently having difficulties connecting to the Neo Freerunner (running
> OM2009) from Ubuntu 9.04.
>
> Initially I did not get the usb0 ethernet connection when plugging in the
> booted device, so I used
>
> modprobe g_ether
>
> t
23 matches
Mail list logo
