I'm now trying to just run the Neo with no Wifi encryption (the AP doesn't like something about the Neo's WPA handshake... next weeks problem) and with a static IP address (the Neo's dhcp client s/w doesn't like something about the DHCPOFFER message from the AP... next month's problem).
So I have the following in the interface file under "/etc/network": # Wired or wireless interfaces auto eth0 iface eth0 inet static wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf address 192.168.1.20 network 192.168.1.0 netmask 255.255.255.0 gateway 192.168.1.1 up route del default gw 192.168.0.200 And here is the contents of the "wpa_supplicant.conf" file: ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0 eapol_version=1 ap_scan=1 fast_reauth=1 # Open: network={ ssid="Asterisk" key_mgmt=NONE priority=80 } Now, when the Neo boots, it appears that the wpa_supplicant.conf file does get accessed and the AP can be seen allowing it into the network. However, once the Wifi part is done the default route through the usb0 interface is still there. The last line "up route del default gw 192.168.0.200" does not have any effect and, the usb cable is not even plugged in but when I use the Neo's terminal to look at the route table, there's the default route which I believe confuses the TCP/IP stack on the Neo and I can't shell into it (I have read the Wifi page about Neo and have done the subsequent mods.). Has anyone been able to get the Neo to setup properly for Wifi access at boot? Cheers!! -- "To Err is human, to forgive is NOT company policy." John Dowd S/W Contractor email: jdowd at gmail dot com Cell: (613)316-7884 Home: (613)234-7884
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community