, like to put the image into a uSD and then boot and
flash (like the Android for example) ?
Thank you in advance,
Chris
--
View this message in context:
http://openmoko-public-mailinglists.1958.n2.nabble.com/Unable-to-flash-using-nandwrite-tp4997919p4997919.html
Sent from the Openmoko Community
xChris csynt8...@gmail.com writes:
as I read on the wiki, the #cat /proc/mtd should show a 'rootfs' ... but
when I run this command on my h:1
What parameters are you passing to Linux? (cat /proc/cmdline to see)
So, that means is impossible to flash the device using the nandwrite
command?
xChris wrote:
there is no rootfs and the mtd6 is called 'system' needless to say when
I attempt to flash the /mtd6 the command
fails as it says the Input file does not fit into device
So, that means is impossible to flash the device using the nandwrite
command?
I don't have my
Hi,
What parameters are you passing to Linux? (cat /proc/cmdline to see)
i use the cat /proc/mtd
and nandwrite -p /dev/mtd6 to write the nand
chris
--
View this message in context:
http://openmoko-public-mailinglists.1958.n2.nabble.com/Unable-to-flash-using-nandwrite
--
View this message in context:
http://openmoko-public-mailinglists.1958.n2.nabble.com/Unable-to-flash-using-nandwrite-tp4997919p4998737.html
Sent from the Openmoko Community mailing list archive at Nabble.com.
___
Openmoko community mailing list
5 matches
Mail list logo