On Tuesday 05 August 2008, arne anka wrote:
The ferrite is increasing the common mode inductance of the cable
because the
ferrite has a better magnetic permeability than air. Taping the ferrite
to
the cable is a bit like a half turn on a ferrite rod. It will still
affect
the
Is there anyone we can contact, as community members, to attempt to
get the documentation freed up? Anything we can do at all for that
matter? Whether or not it's likely to succeed.
I considered this for a while and sent a quite long e-mail to
[EMAIL PROTECTED] - the company that makes the
Neng-Yu Tu (Tony Tu) wrote:
Yes, we don't have unified warranty policy yet, but this does not mean
we don't take the responsibility for user get bad devices.
Define bad...
It's a little vague -- does 'bad' simply mean DOA like was announced by
Steve several months ago regarding the
Andy Green wrote:
| Has anyone
| figured out how to kick the GPS receiver into UBX mode? I would be
| curious to see if that changes anything.
It's actually documented by Ublox in here (Okular eats it)
On Tue, Aug 5, 2008 at 6:52 PM, Timo Juhani Lindfors
[EMAIL PROTECTED] wrote:
Ha, I had a cold joint. When I touched green with a multimeter the
device started to work! :-)
When everything's settled, would you agree to write some schematics or
a even a small howto on your work? It seems pretty
French aswell, ordered two and a half week ago, still didn't receive a
thing despite the fact that I did receive the shipping confirmation
(two days after my order).
I'm french. I received the shipping confirmation on 29/07 and the
shield on 01/08. I ordered about a week before the shipping
I can tell the exact same story as all of you do! But last friday night at 8
o'clock I got this mail, which makes me think mine will finally arrive tomorrow
or the day after tomorrow:
Hallo,
Gute Neuigkeiten zu ihrer Bestellung bei www.Pulster.de:
Ihr Pakerl ist seit heute unterwegs !
Wir
Hi all,
Just to let you know, I tried the above script and am not quite sure the
gpsr is completely reset ( e.g. a real cold start occurs ) . However, since
I DID apply the HW cap fix that might also be a reason for the results...
In short, no matter which settings are used I get a TTFF of
On Tuesday 05 August 2008, Stroller wrote:
Me, too. An exactly similar experience so far. But I think I will
give them a few more days.
I can recommend giving them a call. It takes a while until they pick up
the phone, but they are very kind. They immediately agreed to send a
replacement for
Olivier Migeot [EMAIL PROTECTED] writes:
When everything's settled, would you agree to write some schematics or
a even a small howto on your work? It seems pretty interesting :)
Yes, I am currently trying to figure out how to upload images to wiki. We have
card, no Paypal, only bank transfer that cost me 3,50€ and take a lot
more time.
from where in europe are you ordering?
if you're inside emu when using iban your transfer is not allowed to cost
more than a national transfer.
___
Openmoko community
Hello OpenMoko community,
we are a group of people organizing the second Barcamp in Bangkok,
Thailand on August 30 and 31, 2008.
As the whole event is centered around open source technology, we would
be very excited to learn more about the OpenMoko project.
For our next Barcamp we already have
I reported a problem to the openmoko bug tracker a little while ago and I
haven't received any feedback yet. I'm hoping I will get more feedback here.
When I try using A2DP on my freerunner, I get performance so bad that it's
completely unlistenable. The performance is similar to what I get
On Tue, Aug 5, 2008 at 6:43 AM, Cédric DUFOUIL [EMAIL PROTECTED]wrote:
Hi community,
I ordered an InvibleShield protection at Zagg.com for my freerunner the
18th of july and have been charged on my credit card but have no news about
my order (despite the fact that I sent them emails !!)
I
When you are collecting data you might also keep in mind conditions
vary a lot according to the current satellite constellation. You
should include the count of satellites in view and the pdop number
with your results data.
You can do some planning to make sure you don't run one test when
Cédric DUFOUIL [EMAIL PROTECTED] writes:
Hi community,I ordered an InvibleShield protection at Zagg.com for my
freerunner the 18th of july and have been charged on my credit card but have no
news about my order (despite the fact that I sent them emails !!)I would like to
know if any of you had
I recently received my freerunner, and am enjoying it so far!
I have mainly been using the qtopia image from qtopia.net, but have
been regularly updating my kernel from buildhost.openmoko.org.
On doing some testing, I find the following: I can receive SMS messages
perfectly whilst the phone is
If you are without a keyboard, I would suggest removing matchbox
entirely and starting over. See
http://wiki.openmoko.org/wiki/Switching_Keyboards .
1) Remove existing:
opkg remove matchbox-keyboard-inputmethod matchbox-keyboard-im
matchbox-keyboard-applet
2) Then follow the instructions for
2008/8/5 Yorick Moko [EMAIL PROTECTED]:
this installs another version of navit that does not start when I press it
I could install navit with
opkg install http://www.mikeasoft.com/~mike/ipk/armv4t/navit_0.0.4-r0_armv4t.ipk
but running it gives:
** (process:1582): WARNING **: failed to
2008/8/5 Jeffrey Ratcliffe [EMAIL PROTECTED]:
** (process:1582): WARNING **: failed to instantiate gui '(null)'
On reflection, this is probably because I threw too big a map at it.
Without a map, at least it starts.
Jeff
___
Openmoko community
On Tue, Aug 5, 2008 at 10:40 PM, Dylan Reilly [EMAIL PROTECTED] wrote:
If you are without a keyboard, I would suggest removing matchbox
entirely and starting over. See
http://wiki.openmoko.org/wiki/Switching_Keyboards .
1) Remove existing:
opkg remove matchbox-keyboard-inputmethod
On Aug 5, 2008, at 10:40 PM, Dylan Reilly wrote:
opkg install
http://atariland.net/~dreilly/openmoko/matchbox-keyboard-inputmethod_0.1-finger_armv4t.ipk
hrmm ...
[EMAIL PROTECTED]:~# opkg remove matchbox-keyboard-inputmethod matchbox-
keyboard-im
Removing package
I would gladly compare notes with you, but I'm missing
bluez-utils-alsa. Where'd you get that package? As soon as I get
that package, I should have A2DP running and can report the results.
-Steven
On Tue, Aug 5, 2008 at 2:03 PM, Daniel Benoy [EMAIL PROTECTED] wrote:
I reported a problem to
On Tue, Aug 5, 2008 at 11:44 PM, Jay Vaughan [EMAIL PROTECTED] wrote:
On Aug 5, 2008, at 10:40 PM, Dylan Reilly wrote:
opkg install
http://atariland.net/~dreilly/openmoko/matchbox-keyboard-inputmethod_0.1-finger_armv4t.ipk
hrmm ...
[EMAIL PROTECTED]:~# opkg remove
you can install the things that fail from the feed:
yupp, the md5 error means that there's a package in the feed with the same
version but a different md5sum.
since this wasn't the case when i build those packages no one ever hit
that snag -- seems the buildhost's glitch resulted somehow in
arne anka wrote:
from where in europe are you ordering?
if you're inside emu when using iban your transfer is not allowed to cost
more than a national transfer.
I'm ordering from France (my bank is Société Générale), and they charged
me 3,05€ (not 3,50€ as I said before, I've just
I can confirm this; it's been happening for the last week or so.
Tim
On Tue, Aug 5, 2008 at 9:36 PM, Dan Weatherill
[EMAIL PROTECTED] wrote:
I recently received my freerunner, and am enjoying it so far!
I have mainly been using the qtopia image from qtopia.net, but have
been regularly
just very annoying if you have the keyboard up and the phones locks
you have to ssh in to remove it to be able to unlock the phone
very annying, indeed.
seriously... what is wrong with the dim, no lock option in 2007.2,
it looks rather easy to fix but has been around for as long as i know
I would gladly compare notes with you, but I'm missing
bluez-utils-alsa. Where'd you get that package? As soon as I get
that package, I should have A2DP running and can report the results.
see
http://www.ginguppin.de/node/22
and i sincerely hope bt audio will become useful in a near
Al Johnson wrote:
For a bit more consistency of timing, less manual intervention, and enough
readings to get an idea of the run to run variation in that location, can I
suggest a script? It could do with a timeout when waiting for a fix since
with deivestrength 3 and idleclk 1 this can take
Are you able to send OK with the Qtopia image? I can receive but not send.
Could be an issue with my provider which is T-Mobile. Haven't tested receiving
in suspend vs. awake mode but will try it.
- Original Message -
From: Tim Coggins [EMAIL PROTECTED]
To: List for Openmoko
2008/8/6 Ryan Meador [EMAIL PROTECTED]:
Hi community,I ordered an InvibleShield protection at Zagg.com for my
freerunner the 18th of july and have been charged on my credit card but have
no
news about my order (despite the fact that I sent them emails !!)I would like
to
know if any of you
arne anka wrote:
I'm not sure if I'm doing something incredibly stupid here, but:
...
[EMAIL PROTECTED]:/media/card# opkg install
matchbox-keyboard-0.1-finger.tar.gz
yes, you do. twice, actually :-)
There are days when a bit of humble pie is good for one.
*blush*
On Tuesday 05 August 2008 4:06:47 arne anka wrote:
I would gladly compare notes with you, but I'm missing
bluez-utils-alsa. Where'd you get that package? As soon as I get
that package, I should have A2DP running and can report the results.
see
http://www.ginguppin.de/node/22
and i
All,
I've been taking it easy with the FSO Milestone 2 image - nice piece
of work, not as fully functional as 2007.2, but appears to me more
stable and intuitive. I don't think the questions below are unique to
this environment, but that's what I'm using on my Neo Freerunner.
When I
Ok, where did you get that file?? You must share your secret. Cause
I really did look and couldn't find anything that looked right.
-Steven
On Tue, Aug 5, 2008 at 6:06 PM, arne anka [EMAIL PROTECTED] wrote:
I would gladly compare notes with you, but I'm missing
bluez-utils-alsa. Where'd you
Hello,
Due to unexpected circumstances, I would like to sell my just purchased
FreeRunner. I have the GSM 850 FreeRunner model for use in the United
States. It is completely new, barely used. I Just turned it on a couple of
times, made a few phone calls, sent some text sms messages, and
Kevin Dean wrote a great review of the FSO Milestone 2 release, and
some commentary about the new OM direction that I think expresses the
opinion of a lot of us. It's not really surprising, but it is well
said.
Alex Kavanagh wrote:
Jay Vaughan wrote, On 05/08/08 16:32:
It would be a terrible shame if, after all the 'more important work'
gets done, Glamo gets ignored because 'now its time to build new
hardware'. I think it'd be rotten, in fact.
I'd agree with that, if that happens - but that
Daniel
On Tue, Aug 5, 2008 at 1:03 PM, Daniel Benoy [EMAIL PROTECTED] wrote:
I reported a problem to the openmoko bug tracker a little while ago and I
haven't received any feedback yet. I'm hoping I will get more feedback here.
there are two sources of possible trouble for quality, cpu load
Florian Hackenberger wrote:
On Tuesday 05 August 2008, Stroller wrote:
Me, too. An exactly similar experience so far. But I think I will
give them a few more days.
I can recommend giving them a call. It takes a while until they pick up
the phone, but they are very kind. They immediately
Are you able to send OK with the Qtopia image? I can receive but not send.
Could be an issue with my provider which is T-Mobile. Haven't tested
receiving in suspend vs. awake mode but will try it.
I can send txt messages with the Qtopia image with Virgin mobile
(Optus network) in Australia,
101 - 142 of 142 matches
Mail list logo