These are my understandings from lots of reading and previous posts
between myself and Andy Green and others on the subject - should all be
in the archives. With 2007.2 I was hit one out of every 3 overnight
suspends ending in a flat battery. At least with 2008.9 its rarer (but
does happen :(
Hello,
I installed the openmoko on qemu, it's worked well. But its
emulation part is too
Slow. When I clicked on any application it takes around 1 minute to
start the application.
Second one is there is no close application logo on the application
itself, so I have to close
El día Wednesday, October 01, 2008 a las 02:04:16PM +0800, William Kenworthy
escribió:
Minicom works, as does cu (part of uucp)
However, there are a few GPRS guides around that tell you how to do it.
check the wiki. There are few wrinkles like stopping the GSM daemon
when talking to the
On Sun, Sep 28, 2008 at 3:18 PM, Valerio Valerio [EMAIL PROTECTED] wrote:
Hi,
Can you also provide me the output of ReMoko ?
Sure, here you go, sorry for the delay i was really busy for the last 3 days
[EMAIL PROTECTED]:~# DISPLAY=:0 remoko
dbus_objectInit...
proxy ok
interface ok
failcount=
ok i don't know if this might be useful but the line -- BlueZ input
service started is only showin in the terminal through ssh after i press
the X button
___
Openmoko community mailing list
community@lists.openmoko.org
Matthias Apitz wrote:
El día Tuesday, September 30, 2008 a las 02:38:51PM +0100, Arigead escribió:
Hello all,
Want to play with the wifi icon on the FR either in [2008.09] or
[FSO] Perhaps [FSO] makes more sense in the long run.
Anyhow can I from a C Program set the icon? And can I
El día Wednesday, October 01, 2008 a las 08:30:00AM +0100, Arigead escribió:
Matthias Apitz wrote:
El día Tuesday, September 30, 2008 a las 02:38:51PM +0100, Arigead escribió:
Hello all,
Want to play with the wifi icon on the FR either in [2008.09] or
[FSO] Perhaps [FSO]
Hi David and Linus,
I have the same problem...
After registering if I try to open the phone book I see only message
Loading Sim...
I can't see my phone book content in Sim and my FR behaves very
strangely also.
I can't receive calls if somebody calls. My FR rings, but I am unable
to press the
I know that I've email on this subject before but I got no response to
my last post, or perhaps it just didn't get through.
Regardless of what distro I use my FR is constantly locking up and has
to have the battery removed. I tried to communicate with Pulster who
supplied the phone but they're
On Wed, 01 Oct 2008, madis wrote:
After registering if I try to open the phone book I see only message
Loading Sim...
I can't see my phone book content in Sim and my FR behaves very
strangely also.
I can't receive calls if somebody calls. My FR rings, but I am unable
to press the answer
El día Tuesday, September 30, 2008 a las 08:52:14PM +0800, William Kenworthy
escribió:
On Tue, 2008-09-30 at 14:37 +0200, Matthias Apitz wrote:
El día Tuesday, September 30, 2008 a las 08:11:48PM +1000, Alex Osborne
escribió:
Matthias Apitz wrote:
I'm trying to bring up the eth0
2008/10/1 Tha_Man [EMAIL PROTECTED]:
Great find! I ran into this yesterday as well, but I have another question:
I'm using Om2008.9 to install Debian on my Freerunner, how do I 'install'
libcaca0 and libcucul0?
I know I can access the card, but how do I install these libs to it?
You have to
Ok thats why I was unable to reproduce the issue, I allways have
dissabled auto suspend, I suspend manually and I usually do a lot of
things once the neo boots up before and I deatached it from the pc.
Any one with same experience on a raw 2008.9 instalation?, if not maybe
amstrong demux has
Matthias Apitz wrote:
El día Wednesday, October 01, 2008 a las 08:30:00AM +0100, Arigead escribió:
Matthias Apitz wrote:
El día Tuesday, September 30, 2008 a las 02:38:51PM +0100, Arigead escribió:
Hello all,
Want to play with the wifi icon on the FR either in
On Wed, 2008-10-01 at 10:10 +0200, Matthias Apitz wrote:
El día Tuesday, September 30, 2008 a las 08:52:14PM +0800, William Kenworthy
escribió:
On Tue, 2008-09-30 at 14:37 +0200, Matthias Apitz wrote:
...
Hi William,
A bit inspired by your commands since yesterday I have
Matthias Apitz wrote:
El día Wednesday, October 01, 2008 a las 08:30:00AM +0100, Arigead escribió:
Matthias Apitz wrote:
El día Tuesday, September 30, 2008 a las 02:38:51PM +0100, Arigead escribió:
Hello all,
Want to play with the wifi icon on the FR either in [2008.09] or
[FSO]
Hi
I am looking for programmers who can start and complete a project for me.
I am sure you know of www.fring.com .
Unfortunately Fring management and I cannot agree to my request as they
cannot do OEM/ODM. I am not willing to brand their name in my phone.
Simply speaking,
1.
Another thing is I bought a 2G uSD and I want to move my debian system to
that card. If I manually partition it (8MB fat and rest ext2) and just
copy
contents of 512M, would it work? Or maybe i can copy an image using dd
and
then somehow resize the partition. Anyone tried migrating from
Hi there on of our colleges[1] of the spanish list has provided us with
an gsmhanset state file that solves low volume on call reciver , I
have barelly tested it alone with a phone en each ear :). I will test it
further along the day and post the results, any one else willing to try
is wellcome to
I usually do cp -ax ... with success. I've cloned entire operating
systems like this in the past without problems. Haven't tried with OM
yet, but it worked with a couple of Ubuntu installations. Takes a long
time, though... ;)
Obviously, you preferably do it with the filesystem offline...
On Wed, Oct 1, 2008 at 6:05 AM, Sarton O'Brien [EMAIL PROTECTED]wrote:
I use testing and have varied success with wifi. I don't bother with trying
to
identify what going on by what's being reported. It has been stated on here
that the issues with the driver are great enough that statistics
Hello,
The Wiki page http://wiki.openmoko.org/wiki/GPRS describes how to make
GPRS working by hand in Om2007.2 and most of the stuff for chat-scripts
and PPP options seems to be correct (compared with what I was using with
my cellphone connected via V.24 to my laptop);
in 2007.2 there was a
Hi,
2008/10/1 Flyin_bbb8 [EMAIL PROTECTED]
ok i don't know if this might be useful but the line -- BlueZ input
service started is only showin in the terminal through ssh after i press
the X button
this is the normal behavior, ReMoko stop the input service because use the
same channels to
On Wed, 2008-10-01 at 16:58 +0530, Nishit Dave wrote:
All this discussion does not help if you realize that even after
placing the FR *next* to the blooming router, you get reported a
signal strength of 65%. What does the hardware expect, building the
router *inside* the FR?
Note that
On Wed, Oct 1, 2008 at 5:22 PM, Xavier Bestel [EMAIL PROTECTED] wrote:
On Wed, 2008-10-01 at 16:58 +0530, Nishit Dave wrote:
All this discussion does not help if you realize that even after
placing the FR *next* to the blooming router, you get reported a
signal strength of 65%. What
On Wed, 2008-10-01 at 17:36 +0530, Nishit Dave wrote:
On Wed, Oct 1, 2008 at 5:22 PM, Xavier Bestel [EMAIL PROTECTED]
wrote:
On Wed, 2008-10-01 at 16:58 +0530, Nishit Dave wrote:
All this discussion does not help if you realize that even
after
On Wed, Oct 1, 2008 at 5:49 PM, Xavier Bestel [EMAIL PROTECTED] wrote:
On Wed, 2008-10-01 at 17:36 +0530, Nishit Dave wrote:
On Wed, Oct 1, 2008 at 5:22 PM, Xavier Bestel [EMAIL PROTECTED]
wrote:
On Wed, 2008-10-01 at 16:58 +0530, Nishit Dave wrote:
All this
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello community, I've got a little problem.
The last times, when i made opkg update/upgrade I got this error:
FATAL: Error inserting snd_soc_neo1973_wm8753
(/lib/modules/2.6.24/kernel/sound/soc/s3c24xx/snd-soc-neo1973-wm8753.ko):
No such device
May
On Wed, 2008-10-01 at 16:58 +0530, Nishit Dave wrote:
On Wed, Oct 1, 2008 at 6:05 AM, Sarton O'Brien
[EMAIL PROTECTED] wrote:
...
All this discussion does not help if you realize that even after
placing the FR *next* to the blooming router, you get reported a
signal strength of
A small bug - I can't enter my APN in the GPRS settings because there is
a size limit on the field. Based on reading the GSM spec, the maximum
length allowed seems to be 100 characters. The spec i found is at
www.3gpp.org/ftp/TSG_SA/WG2_Arch/TSGS2_05/SMG12_and_QoSah/TDocs/C-99-466.doc
if anyone
I am using gyspy it seem to be very simple. I like it! :)
Michele Renda
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
I know It is very complicated to fit it to stay in a little screen
(or may be I use a big font). I was thinking to the poor person that
will localize it in German.
I every case I will release for this evening (I hope) a 2.0 pre
alpha where I improved a lot the GPS section (now it show the
On Wednesday 01 October 2008 07:51:48 am Valerio Valerio wrote:
Hi,
2008/10/1 Flyin_bbb8 [EMAIL PROTECTED]
ok i don't know if this might be useful but the line -- BlueZ input
service started is only showin in the terminal through ssh after i press
the X button
this is the normal
Neil Jerram wrote:
2008/10/1 Tha_Man [EMAIL PROTECTED]:
Great find! I ran into this yesterday as well, but I have another
question:
I'm using Om2008.9 to install Debian on my Freerunner, how do I 'install'
libcaca0 and libcucul0?
I know I can access the card, but how do I install these
El día Wednesday, October 01, 2008 a las 01:37:52PM +0200, Matthias Apitz
escribió:
Hello,
The Wiki page http://wiki.openmoko.org/wiki/GPRS describes how to make
GPRS working by hand in Om2007.2 and most of the stuff for chat-scripts
and PPP options seems to be correct (compared with
Alastair Johnson wrote:
Matthias Apitz wrote:
El día Wednesday, October 01, 2008 a las 08:30:00AM +0100, Arigead escribió:
Matthias Apitz wrote:
El día Tuesday, September 30, 2008 a las 02:38:51PM +0100, Arigead
escribió:
Hello all,
Want to play with
Will this version actually report when I have voicemail?
On September 30, 2008 03:09:43 pm Lorn Potter wrote:
Thomas Bertani wrote:
wow! confirmed new features? gtalk, webbrowser, gps?
In videos I can't see screen orientation, it is aviable?
Yes. dynamic rotation is available.
Thanks a
On Wed, 1 Oct 2008 15:32:23 +0200, Matthias Apitz [EMAIL PROTECTED] wrote:
El día Wednesday, October 01, 2008 a las 01:37:52PM +0200, Matthias
Apitz
escribió:
Hello,
The Wiki page http://wiki.openmoko.org/wiki/GPRS describes how to make
GPRS working by hand in Om2007.2 and most of the
I can use two card readers, no problem. would you suggest me tar /dev/sdb2
and untar it into /dev/sdc2? Or is
'dd if=/dev/sdb of=/dev/sdc' better
On Wed, Oct 1, 2008 at 1:15 PM, [EMAIL PROTECTED] wrote:
I usually do cp -ax ... with success. I've cloned entire operating
systems like this in
2008/10/1 Atilla Filiz [EMAIL PROTECTED]
I can use two card readers, no problem. would you suggest me tar /dev/sdb2
and untar it into /dev/sdc2? Or is
'dd if=/dev/sdb of=/dev/sdc' better
You may dd if=/dev/sdb2 of=/dev/sdc2, and after resize2fs /dev/sdc2.
Nicola
El día Wednesday, October 01, 2008 a las 09:55:31AM -0400, Joel Newkirk
escribió:
On Wed, 1 Oct 2008 15:32:23 +0200, Matthias Apitz [EMAIL PROTECTED] wrote:
El día Wednesday, October 01, 2008 a las 01:37:52PM +0200, Matthias
Apitz
escribió:
Hello,
The Wiki page
Well, I'm out of options. I left my fr plugged into the trickle charger
overnight. Still won't boot.
Then I read this last post, about removing the battery long enough for a reset,
plugging into USB for 5-10 min, unplug/pause/plug back in. Still won't boot.
The only thing I haven't done that
try again and it will eventually workthe usb cable connected to the
computer is usually the way to go...and when it boots, quickly swap it
to the ac charger...at least that's what i just did (my neo died during
the night)
Vince M. Clark escribió:
Well, I'm out of options. I left my fr
Hello Timo, All
may be you can help me... you have experience about Debian Source package?
I'd like a lot to be able to make a Deb-Src package... in this way
it'd be possible to tke the sources with:
dpkg-get source sephora
and to push in a repository with
dput
It is possible to do it with
I also have this problem. I'm glad I'm not the only one. I was worried
my sim card reader broke. (As the contacts were being imported
correctly before.
When I first boot up the phone, it connects to the network and can make
calls and suspend fine. However, if I try to goto the contacts
On Wed, 1 Oct 2008, Matthias Apitz wrote:
I've read this before, but all this information is outdated because it
talks about starting gsmd (which is not there anymore in Om2008.9) and I
don't even know if the Qtopia's qpe is aware of handling this device of
Multiplexing;
i have it working
Hi,
Am Mittwoch, den 24.09.2008, 13:32 +0200 schrieb [EMAIL PROTECTED]:
Angus Ainslie [EMAIL PROTECTED]
On Tue, Sep 23, 2008 at 3:37 PM, [EMAIL PROTECTED] wrote:
Angus Ainslie [EMAIL PROTECTED]
writes:
On Tue, Sep 23, 2008 at 12:23 PM, [EMAIL PROTECTED] wrote:
2008/10/1 Claus Christmann [EMAIL PROTECTED]
On Wednesday 01 October 2008 07:51:48 am Valerio Valerio wrote:
Hi,
2008/10/1 Flyin_bbb8 [EMAIL PROTECTED]
ok i don't know if this might be useful but the line -- BlueZ input
service started is only showin in the terminal through ssh
On Wed, 01 Oct 2008, Dan Staley wrote:
I also have this problem. I'm glad I'm not the only one. I was worried
my sim card reader broke. (As the contacts were being imported
correctly before.
When I first boot up the phone, it connects to the network and can make
calls and suspend fine.
On Oct 01, Maciej Piechotka wrote:
What's currently the most stable?
I'd need to:
- Entry pin (I haven't manage to do it in 2008.8 despite moving pen up)
- Phone/Recive SMS
- Have GPS/WiFi
- Have USB Networking for initial setup
You can try FDOM. It's somewhat bloated, but works nicely for
On Wed, 01 Oct 2008 14:39:08 +0100, Arigead [EMAIL PROTECTED]
wrote:
Sorry Yes I would like to use the Icon on the top of the illume bar. I
was thinking interfacing this to my daemon so regardless of app you can
see the wifi status the same as you can see the GSM status at present.
If
hi all,
if I connect the earphones at the fr i can hear only from one side... is
that and hardware or a software problem? I tried with asu and qtopia with
the same result
(the earphones are ok...)
thanks
d
___
Openmoko community mailing list
I did
dd if=/dev/sdb2 of=/dev/sdf2
and it booted but i still have a problem. sdb was a 512M card and sdf is 2G.
After copying, my pc sees it as 2G but FR sees it as 512M. Runing some
partition software now(testdisk).
On Wed, Oct 1, 2008 at 4:09 PM, Nicola Mfb [EMAIL PROTECTED] wrote:
2008/10/1
David Samblas a écrit :
Hi linus,
the only modification done vs the OM 2008.9 regarding gsm is the
addition of the
http://www.angstrom-distribution.org/feeds/2008/ipk/glibc/armv4t/base/gsm0710muxd_0.9.1+r0-gitr3ff86b129640b647ccba3d86eb243d864671b039-r0_armv4t.ipk
OK, 1st dirty fix:
# rm
Am 29.09.2008 um 16:04 schrieb Dr. H. Nikolaus Schaller:
I will pack the latest sources tomorrow (don't have time today). It
will include
an improved makefile that autmatically does all the ssh steps between
two
Macs to start the kernel debugging mode.
Well, it took a little longer.
Here
What kind of earphones are you trying to use? I thought FR uses a special 4
pin jack for which you need an adapter if you want to use normal headphones
Davide Scaini wrote:
hi all,
if I connect the earphones at the fr i can hear only from one side... is
that and hardware or a software
those shipped with fr ;-)
d
On Wed, Oct 1, 2008 at 6:02 PM, Thor [EMAIL PROTECTED] wrote:
What kind of earphones are you trying to use? I thought FR uses a special 4
pin jack for which you need an adapter if you want to use normal headphones
Davide Scaini wrote:
hi all,
if I connect
Alex does bring up some excellent points, and I would like to point to
the (unfortunately closed source) media centre app for the Nokia
Internet Tablet called Canola as an example, which was written in
Python (distributed as byte compiled python) and uses EFL for the
graphics. Everything in the
Hi,
Am Mittwoch 20. August 2008 9:39:29 pm schrieb enaut:
I recieved my Gummi bears yesterday :)...
Yeah, one hour ago I pick up the parcel from the post office and, of course,
with the Gummi bears, too. :-)
Thank you, Christoph!
Greetings, Carsten
--
Hier ist mein öffentlicher
On Wed, 1 Oct 2008 16:18:33 +0200, Matthias Apitz [EMAIL PROTECTED] wrote:
El día Wednesday, October 01, 2008 a las 09:55:31AM -0400, Joel Newkirk
escribió:
What you need is referred to as Multiplexing - the wiki page you
referenced
talks about it. The multiplexer allows multiple bindings
Davide Scaini wrote:
hi all,
if I connect the earphones at the fr i can hear only from one side... is
that and hardware or a software problem? I tried with asu and qtopia
with the same result
(the earphones are ok...)
thanks
d
qtopia and 2008.x don't switch alsa state files on insertion
Thanks a lot I'll try!
why there's no wiki about that?
thanks again
d
On Wed, Oct 1, 2008 at 6:40 PM, Alastair Johnson [EMAIL PROTECTED]wrote:
Davide Scaini wrote:
hi all,
if I connect the earphones at the fr i can hear only from one side... is
that and hardware or a software problem? I
I made this as a work around to this issue for the moment. It works OK for me.
http://lists.openmoko.org/pipermail/community/2008-September/029599.html
On Wed, Oct 1, 2008 at 12:45 PM, Davide Scaini [EMAIL PROTECTED] wrote:
Thanks a lot I'll try!
why there's no wiki about that?
thanks again
Davide Scaini wrote:
Thanks a lot I'll try!
why there's no wiki about that?
Because nobody's added it yet ;-) If it sorts the problem for you then
please add the details to the wiki.
thanks again
d
On Wed, Oct 1, 2008 at 6:40 PM, Alastair Johnson [EMAIL PROTECTED]
mailto:[EMAIL
Hello list
No matter what I'm doing, Debian won't wake up from suspend. I have
installed a recent FSO3 kernel, I tested both sd_idleclk scripts
mentioned at http://wiki.openmoko.org/wiki/Debian.
The first script ends with the command touch /home/root/.profile. When
I reboot my phone after an
Thank you both for the hints! Had to do it like Tha_Man, dpkg -i instead of
aptitude...
Installing fso now, hope without further interuptions :)
Tha_Man wrote:
Neil Jerram wrote:
2008/10/1 Tha_Man [EMAIL PROTECTED]:
Great find! I ran into this yesterday as well, but I have another
2008/9/30 Joel Newkirk [EMAIL PROTECTED]
In the course of working on my development VM, I installed qemu using
Mokomakefile. It seems it installs a Qtopia image.
Can someone lead me by the hand, or point out a howto/faq I missed, that
clearly tells me how to set up other images with it,
Yes.
I did some small update of that to run on the Eclipse Ganyemed which had
different settings.
What would be nice is a plugin which have all the stuff included, like
the toolchain, maybe an emulator. What's so nice with eclipse is that it
has nice features to update plugins automatic.
Got to join the happy crowd with thanks to Christoph Pulster.
If only I had a bit more time to play with FR - oh, well next week
will be better.
Boštjan
On 1.10.2008, at 18:26, Carsten Gerlach wrote:
Hi,
Am Mittwoch 20. August 2008 9:39:29 pm schrieb enaut:
I recieved my Gummi bears
I've tried multiple times with no success.
- Original Message -
From: Tomas Riveros Schober [EMAIL PROTECTED]
To: List for Openmoko community discussion community@lists.openmoko.org
Sent: Wednesday, October 1, 2008 8:26:57 AM (GMT-0700) America/Denver
Subject: Re: dead battery
try
Suspend is broken again in the latest fso kernels. But with the latest
openmoko kernel suspend works. But zhone is reacting a bit weird after
resuming. ;)
Ciao,
Rainer
Sven Bretfeld wrote:
Hello list
No matter what I'm doing, Debian won't wake up from suspend. I have
installed a recent
Apparantly a phone with the Android OS has recently been released. I know
Android is also based on Linux. Are there any plans to get openmoko running on
that device?
Is it even feasible? I wonder if we'd be able to use their kernel with
openmoko code. (I'm also imagining that if they don't
Vince M. Clark a écrit :
My battery is completely drained so I cannot boot to charge it.
I usually just take out the battery and try to start it with the charger
plugged in (never tried with the USB). A combination of
- letting it without power for 30 seconds (no battery and no charger)
-
Fox Mulder [EMAIL PROTECTED] writes:
Suspend is broken again in the latest fso kernels. But with the latest
openmoko kernel suspend works. But zhone is reacting a bit weird after
resuming. ;)
You are right. It's working now. Thank you very much.
Greetings
Sven
pgpTAyj2c73VR.pgp
2008/10/1 Sven Bretfeld [EMAIL PROTECTED]
Suspend is broken again in the latest fso kernels. But with the latest
openmoko kernel suspend works. But zhone is reacting a bit weird after
resuming. ;)
Do you know if they are different kernels, or different version of the same
kernel tree?
On Wednesday 01 October 2008, Vince M. Clark wrote:
I've tried multiple times with no success.
If the various 'leave it charging' methods don't work then your best bet is
the nokia battery or charger for nokia battery.
Stick the charged nokia battery in the freerunner, plug in the usb lead or
You can try FDOM. It's somewhat bloated, but works nicely for me.
Nice, I will try this as well. Even Qtopia didn't work out for me. Other
users have the same experience? It usually takes a while before problems
show, and I'm really hoping I will be able to at least phone and sms with a
normal
As of now, I'm using asterisk on debian to connect to an IAX2 provider.
(diamoncard.us)
There is a far end echo, that is being caused by asterisk on the Freerunner.
Other than that,
it is working perfectly. I don't know much about the FSO framework or
zhone, but it would be trivial
(from the
My eperience with the headset: If you plug it all the way in, you hear from
one side. You pull it out a bit, you hear from teh other side. There is a
sweet spot where you can get sound from both sides. Experiment slowly.
On Wed, Oct 1, 2008 at 8:02 PM, Alastair Johnson [EMAIL PROTECTED]wrote:
A consistency check with fdisk yielded that the size of the partition and
the size of the filesystem do not match, and advised me to run e2fsck.
e2fsck said there are no problems. I ran fdisk and e2fsck on FR-debian.
gparted on my py sees the partition as 2GB. darn it.
On Wed, Oct 1, 2008 at 5:39
A consistency check with fdisk yielded that the size of the partition and
the size of the filesystem do not match, and advised me to run e2fsck.
e2fsck said there are no problems. I ran fdisk and e2fsck on FR-debian.
gparted on my py sees the partition as 2GB. darn it.
so? your partition
I'm assuming you are referring to Qtopia 4.3 right? It was close but not quite
there. I have very high hopes for 4.4.
- Original Message -
From: t m [EMAIL PROTECTED]
To: List for Openmoko community discussion community@lists.openmoko.org
Sent: Wednesday, October 1, 2008 2:56:00 PM
I believe a lot of us are keeping our breath and crossing the fingers.
for that promising 4.4, but I'm a little confused about the openess of
the premium modules.
El mié, 01-10-2008 a las 15:56 -0600, Vince M. Clark escribió:
I'm assuming you are referring to Qtopia 4.3 right? It was close but
On Wed, 1 Oct 2008 11:20:23 -0400 Joel Newkirk [EMAIL PROTECTED] babbled:
On Wed, 01 Oct 2008 14:39:08 +0100, Arigead [EMAIL PROTECTED]
wrote:
i'm baffled. that bar wt the top is always visible - it's not part of your app
(and it only is invisible if your app goes fullsreen). note that the
On Wed, 2008-10-01 at 08:16 -0600, Vince M. Clark wrote:
Well, I'm out of options. I left my fr plugged into the trickle
charger overnight. Still won't boot.
Can you jump start it as per the wiki?
Borrow (friend/partners/... phone) a nokia bl4c, bl5c or bl6c battery?
Boot the FR using this.
It seems that OM and FSO apply different patches to the standard kernel
so they behave a little different. At the moment i stick to OM kernels
because they are build daily instead of FSO which build new kernels only
in longer intervals.
And as long as OM kernels work with the fso framework it is
Lorn Potter wrote:
Marco Trevisan (Treviño) wrote:
Cool... Btw I've seen that there are also some commercial (premium)
modules that could be integrated with Qtopia, also if they're not open
source. Well, will be there a way to get the torch mobile browser, for
example?
This is the full
i have the same versions as Claus, and no i never tryed connecting bluetooth
mouse or keyboard, thanx alot valerio for your help
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
In the enlightenment archives there's a new Rasterman image:
- openmoko-illume-image-glibc-ipk--20080929-om-gta02.rootfs.jffs2 [1]
It looks so cool with the new illume theme [2] [3] [4] [5] [6], but
practically it has no telephony related software installed in since it
seems a simple OE built
On Wed, Oct 1, 2008 at 7:18 PM, Marco Trevisan (Treviño)
[EMAIL PROTECTED]wrote:
In the enlightenment archives there's a new Rasterman image:
- openmoko-illume-image-glibc-ipk--20080929-om-gta02.rootfs.jffs2 [1]
It looks so cool with the new illume theme [2] [3] [4] [5] [6], but
practically
On Wed, 1 Oct 2008 20:32:34 -0600, Ori Pessach [EMAIL PROTECTED]
wrote:
I have a question about the predictive keyboard shown in one of those
movies - what on earth is the justification for providing the following
predictions - User input is on the left, prediction is on the left:
w - a
On Wed, Oct 1, 2008 at 8:57 PM, Joel Newkirk [EMAIL PROTECTED] wrote:
On Wed, 1 Oct 2008 20:32:34 -0600, Ori Pessach [EMAIL PROTECTED]
wrote:
I have a question about the predictive keyboard shown in one of those
movies - what on earth is the justification for providing the following
On Wed, 1 Oct 2008 22:57:10 -0400 Joel Newkirk [EMAIL PROTECTED] babbled:
On Wed, 1 Oct 2008 20:32:34 -0600, Ori Pessach [EMAIL PROTECTED]
wrote:
I have a question about the predictive keyboard shown in one of those
movies - what on earth is the justification for providing the
On Wed, Oct 1, 2008 at 9:11 PM, The Rasterman Carsten Haitzler
[EMAIL PROTECTED] wrote:
On Wed, 1 Oct 2008 22:57:10 -0400 Joel Newkirk [EMAIL PROTECTED]
babbled:
On Wed, 1 Oct 2008 20:32:34 -0600, Ori Pessach [EMAIL PROTECTED]
wrote:
I have a question about the predictive
On Wed, 1 Oct 2008 21:05:53 -0600 Ori Pessach [EMAIL PROTECTED] babbled:
I understand what it's doing. It's not doing it well. I tried it for shell
i disagree. it works like a charm for me - as per my previous mail - i can use
it while walking down the street. more than i can say for pretty
On Wed, 1 Oct 2008 21:35:40 -0600 Ori Pessach [EMAIL PROTECTED] babbled:
Making the user compensate for the algorithm's mistakes before it made them
doesn't sound very useful. Sounds like it assumes that the user has intimate
knowledge of the correction algorithm, which you have, and I don't.
On Thu, 2 Oct 2008 13:11:21 +1000, Carsten Haitzler (The Rasterman)
[EMAIL PROTECTED] wrote:
for entering sms/email/human stuff its great. if the word is not in
your
dict
- it will be listed always at the top of the long-suggestions list (tap
the
top-left arrow). it will then be added to
On Thu, 2 Oct 2008 00:19:50 -0400 Joel Newkirk [EMAIL PROTECTED] babbled:
On Thu, 2 Oct 2008 13:11:21 +1000, Carsten Haitzler (The Rasterman)
[EMAIL PROTECTED] wrote:
for entering sms/email/human stuff its great. if the word is not in
your
dict
- it will be listed always at the top of
98 matches
Mail list logo
