SCarlson [EMAIL PROTECTED] writes:
What is the remedy for this? Reboot? (Like MS-Windows?)..
Don't use wifi :-)
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Sebastian Ohl wrote:
Hi,
On Fri, 2008-11-07 at 10:15 -0500, Stefan Monnier wrote:
BTW, I also noticed that the USB icon (and corresponding control
panel) disappeared here. Is that intentional?
The usb icon vanished because we don't get it working as indented. You still
can't switch the
Hi community,
Hi John Lee, thank you for the great update :) Great work, thank you!
I haven't tried yet but today want to download the testing quick boot
image from last week to see the difference :)
Jeremy looked into the two issues about suspend/resume that we may fix
in userspace. One is
Happened again today while I had time to play. events/0 reached 60% at
times, though mostly 30% in top - I noticed it because I suddenly
realised the phone was getting noticeably hot in my pocket (visions of
those flaming laptops popped into my mind :) - oddly, the battery wasnt
any hotter than
On Sat, Nov 08, 2008 at 01:07:58PM +0100, David Samblas wrote:
El sáb, 08-11-2008 a las 12:38 +0100, David Samblas escribió:
Count with an Spanish translation in short too :)
I want to use it in more general presentation of openmoko not FDOM
focused, Can I make a smooth version regarding
silly answer:
sudo apt-get install zhone-session
?!?
ciao
d
On Sat, Nov 8, 2008 at 1:14 PM, Paul [EMAIL PROTECTED] wrote:
I am trying to set up XFCE, following the info on
http://wiki.openmoko.org/wiki/Debian
Since the install of last night, default things are working well, but
after
Hello list members,
here another FR success story: Booting and usage of a large 16GB SDHC
works!
My configuration and recipe:
- QtExtend on flash
- Debian on microSD (ext2+ext2) [1]
- u-boot daily (8 Nov 2008) from [2]
- Applied configure-uboot.sh from [3]
- Kernel for Debian from [4] (but the
Count with an Spanish translation in short too :)
El sáb, 08-11-2008 a las 01:34 +, Tim Dobson escribió:
Rui Miguel Silva Seabra wrote:
I will try to make a pt_PT translation.
Done! While there isn't a wiki page, it's at:
Hello Joachim and all,
I rebooted, Zhone came up and that does not desire to go beyond
Connecting w/ dbus...
May be related to the frameworkd.conf file from another thread
It was indeed the frameworkd problem. I ran the install command
(apt-get --reinstall install fso-config-gta02)
and
On Fri, 7 Nov 2008 11:40:15 pm Tha_Man wrote:
According to Lorn Potter, it does. And as you wrote earlier in this thread,
it only appears to send these commands with outgoing calls, since incoming
calls still have the echo (and the phone set to handsfree/speaker instead
of handset).
Yup,
cp /etc/init.d/zhone-session /etc/init.d/xfce shouts at me that there is
no file called zhone-session.
when using xfce zhone-session is meaningless -- instead use nodm and
create ~/.xsession accordingly.
wiki and archives should offer plenty of information if needed, but i
think nodm
On Fri, 7 Nov 2008 18:09:31 -0500
Joel Newkirk [EMAIL PROTECTED] (JN)
wrote:
On Fri, 07 Nov 2008 19:55:44 +0100, Marco Trevisan (Treviño)
[EMAIL PROTECTED] wrote:
Christophe Badoit wrote:
Andreas Wallin a écrit :
Im having problems with answer phone calls on android..
Its ringing but how to
rhn [EMAIL PROTECTED] writes:
If they are encrypted, they probably are encrypted on the way to the
operator only, so the operator can probably see the content.
Of course.
About calls - I remember I saw a documentary in which the calls
interfered with TV sets, which allowed to hear the
Hiho!
Few years went on since i had to bother with such simple issues, but i
played arounf for some time and didn't get anywhere ( i have no clue
what to do)
my question is: how do i read our data from the accelerometers in java?
my first approach was to use and modify the pothon script from
El sáb, 08-11-2008 a las 12:38 +0100, David Samblas escribió:
Count with an Spanish translation in short too :)
I want to use it in more general presentation of openmoko not FDOM
focused, Can I make a smooth version regarding other distributions...
you have been ummh eemmhh a little mh
Sudharshan S [EMAIL PROTECTED] writes:
I think, there are DBus bindings for java. So you could probably take a look
at the services offered by FSO for reading accelerometers output.
Wouldn't that cause huge overhead? Reading 100 (or 400) events per
second from two accelometers can not be
Od: Timo Juhani Lindfors [EMAIL PROTECTED]
rhn [EMAIL PROTECTED] writes:
About calls - I remember I saw a documentary in which the calls
interfered with TV sets, which allowed to hear the
conversations. That would imply unencrypted.
That sounds quite unlikely, even if you had configured
Marian Flor wrote:
Hello list members,
here another FR success story: Booting and usage of a large 16GB SDHC
works!
Wow!! Good show!!!
Paul
--
Success generally depends upon knowing how long it takes to succeed.
-Charles de Montesquieu
http://www.nlpagan.net
Running on Mandriva Linux
; this gives you a better view to the maps with tangoGPS,
of course :-)
I have a photo here which shows how the 'gpsd' in the FR supports at the
same time the tangoGPS in the FR and in the laptop:
http://www.unixarea.de/20081108-164226.jpg
I did a small walk in my town having the FR connected to my eeePC
Bernd Prünster [EMAIL PROTECTED] writes:
my question is: how do i read our data from the accelerometers in java?
You open the file[1] and read data[2].
[1] /dev/input/event{2,3}
[2] data is a steady flow of
struct input_event {
struct timeval time;
__u16 type;
__u16 code;
__s32
Hi,
On Fri, 2008-11-07 at 10:15 -0500, Stefan Monnier wrote:
BTW, I also noticed that the USB icon (and corresponding control
panel) disappeared here. Is that intentional?
The usb icon vanished because we don't get it working as indented. You still
can't switch the usb modes... but sudo should
I am trying to set up XFCE, following the info on
http://wiki.openmoko.org/wiki/Debian
Since the install of last night, default things are working well, but
after apt-getting the XFCE packages there's something amiss:
cp /etc/init.d/zhone-session /etc/init.d/xfce shouts at me that there is no
Vinzenz Hersche [EMAIL PROTECTED] writes:
because they are uncrypt. and the gsm-connection isn't secure, some
I thought they are encrypted just like calls. I asked this on
#gnuradio too:
18:36 lindi- hi, i looked at the openbts SMS stack to figure out if
SMS messages are encrypted or not but
On Sat, Nov 08, 2008 at 08:32:16PM +0900, William Kenworthy wrote:
those flaming laptops popped into my mind :) - oddly, the battery wasnt
any hotter than the rest of the phone, though the screen did seem so
(perhaps whatever is behind the screen?)
It's hot because of the intense activity, not
Hi all,
Does anyone have a udev rule for USB keyboard that does the following.
When no external USB devices are connected and a keyboard is plugged in,
USB can switch to host mode and switch back when USB keyboard is
unplugged. As far as I'm concerned, this would be a very welcome feature.
Vinzenz Hersche [EMAIL PROTECTED] writes:
because they are uncrypt. and the gsm-connection isn't secure, some
I thought they are encrypted just like calls. I asked this on
#gnuradio too:
18:36 lindi- hi, i looked at the openbts SMS stack to figure out if
SMS messages are encrypted or
On Saturday 08 November 2008 19:58:29 Bernd Prünster wrote:
so i'm asking to give me a hint how to directly read the accelerometer
output. (it's gotta be possible without jni and the like...
..but if not, what's the best way to do it?)
I think, there are DBus bindings for java. So you could
Am Saturday 08 November 2008 18:24:44 schrieb nacho seijo:
Hi list!
I was reading about using python to write applications on openmoko in the
wiki:
http://wiki.openmoko.org/wiki/Python and I liked the sample with
python-etk.
So as member of FDOM group, I'd like to rewrite the FDOM submenus
2008/11/8 Marcel [EMAIL PROTECTED]
Am Saturday 08 November 2008 18:24:44 schrieb nacho seijo:
Hi list!
I was reading about using python to write applications on openmoko in the
wiki:
http://wiki.openmoko.org/wiki/Python and I liked the sample with
python-etk.
So as member of FDOM
I added it in /init.rc but it didn't work. The keyboard powers up, so
it looks like host mode is working, but I don't get any input in the
terminal app. Also NumLock etc.don't light their respective LEDs.
I don't think the numlock led lits up for me when connected to fr. i
will try this tonight
Paul wrote:
Tim Dobson wrote:
Recently, I helped do a talk at my local free software group[1] about
Openmoko/Neo Freerunner etc. (video coming soon!) for which I wrote a
short presentation, five minutes before it started.
Fantastic!! I have my own 'freerunner experience' webpage, is
31 matches
Mail list logo