Re: ntpd status?
William Kenworthy [EMAIL PROTECTED] writes: On desktops, I use ntpq, but this doesnt seem available on the FR - I have ntp, ntpdate and ntp-utils installed so far. Which distro are you using? ntpq is available on debian armel in the 'ntp' package. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Where can I find this game?
I tested openTTD in last summer on my Debian freerunner. Then it needs one-mouse-button-patch, but I think it is now merged to official. (somewhere in options-menu). Game was playable, when TransportTycoon deluxe was released all monitors are 640x480. Network-multiplaying works. Sound effects works, midi-audio didn't work. Packaging it is hard, because it needs propriety-data-files. (ok, debian etc. has packed it) But they are making also gpl-ed data-files, I do not know how ready this project is. -Aapo Rantalainen ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Optimization team update (11/23 ~ 11/29)
Hi All, During today's upgrade I encountered the following error: * ERROR: The following packages conflict with openmoko-phoneprofile-data: * qtopia-phone-x11-profile-data * How should I proceed? Uninstall one of these? Regards, Andreas John Lee wrote: Dear Community, As Sushama (our new testing team member) indicated in http://lists.openmoko.org/pipermail/devel/2008-November/003493.html , we won't have a release in Nov. Currently the testing team is going to do a full test on the latest testing image. It has all the goodies we did and a lot of improvements over Om2008.9, so please try it and report any error you find. Upgrade howto: From Om2008.9 it's recommanded to upgrade with the following steps: sed -i -e 's%Om2008.8%testing%' /etc/opkg/*.conf /etc/init.d/xserver-nodm stop screen -DR opkg update opkg -force-overwrite upgrade # (please ans Y to all questions) # (the sshd (dropbear) will restart, so you need to reconnect and do # 'screen -DR' again) opkg upgrade shutdown -r now To get the fastest boot time you also need to remove the following packages: opkg remove task-base-nfs task-base-smbfs task-base-bluetooth \ task-base-usbgadget avahi-daemon avahi-autoipd blueprobe \ usb-gadget-mode portmap exquisite exquisite-theme-freerunner \ exquisite-themes Known issues: * GTK redraw problem * some obsolete kernel modules still left in system * must remove 'ro' in kernel boot parameter if you use sd boot. * will purge your incompatible e config, so you might need to set stuffs like suspend time again. Echo: Since there are different hw versions out there (a5, a6, a7), it's impossible to provide one alsa state file that suits all models. However, it seems you can always find appropriate values for your neo. My way is to adjust control.4 Speaker Playback Volume in /usr/share/openmoko/scenarios/gsmhandset.state the max value is 127, 95 works best on my a5. With volume level 3 or 4 in qtopia dialer, the other side can hear no echo while I get good audio quality. Team update: Tick helped to put his touchscreen improvement into stable-tracking, he will work on opkg internals next. Olv moved to look into kernel and fso. Erin will try bluetooth. Julian is working on the GTK redraw issue, please help him out. Jeremy will fix some qtopia bugs and keep working on suspend/resume issues. Regards, John ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Take off navigation box 's item of wiki
Dear community and documentation team: During these past two weeks, I had invited many people to write introduction page on wiki. I am really thankful for their great work and for their help . Now , I have put most of the projects detail of opkg.org introduction site at following link: http://wiki.openmoko.org/wiki/Applications So, I have taken off the opkg link of navigation box on Wiki. You will be able to use Application page to find many useful application for Neo. Feel free to use this page , and I continuously invite people to write their project introduction page for wiki. In the future, if you have any other interesting program/application, please feel free to add it on the page. Thanks for your great support for your help! Brenda ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: ntpd status?
2008.9 - if it was a normal distro it would be easy. BillK On Fri, 2008-12-05 at 10:36 +0200, Timo Juhani Lindfors wrote: William Kenworthy [EMAIL PROTECTED] writes: On desktops, I use ntpq, but this doesnt seem available on the FR - I have ntp, ntpdate and ntp-utils installed so far. Which distro are you using? ntpq is available on debian armel in the 'ntp' package. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- William Kenworthy [EMAIL PROTECTED] Home in Perth! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Where can I find this game?
Can any body put this game's introduction page on wik? http://wiki.openmoko.org/wiki/Applications That will be great. Brenda Aapo Rantalainen ??: I tested openTTD in last summer on my Debian freerunner. Then it needs one-mouse-button-patch, but I think it is now merged to official. (somewhere in options-menu). Game was playable, when TransportTycoon deluxe was released all monitors are 640x480. Network-multiplaying works. Sound effects works, midi-audio didn't work. Packaging it is hard, because it needs propriety-data-files. (ok, debian etc. has packed it) But they are making also gpl-ed data-files, I do not know how ready this project is. -Aapo Rantalainen ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: OpenMooCow 0.2
Can I invite you to put this on wiki? Like other ? http://wiki.openmoko.org/wiki/Applications#Games Brenda Thomas White ??: While waiting for the Christmas puddings to cook this afternoon, I've been making a few updates to OpenMooCow. You can get version 0.2 from the same place as before: http://www.srcf.ucam.org/~taw27/openmoko/openmoocow/ Changes since version 0.1 are: - Moos when tilted either up or down (not just after tilting both ways like before). This seems to be what people expect, even though it's not quite what I remember genuine mooboxes doing. - The packaging has been fixed to depend on the things it needs. - You can now press the cow to make her moo. - Mooing still occurs even if the graphics can't be shown. Run the following on a terminal and your Freerunner will be mooing until the next reboot: $ nohup openmoocow And some improvements under the hood: - It should behave a little better if the accelerometers are sticky. - Code simplified and altered to make it easier to add support for other types of accelerometer. OpenMooCow won't alter your accelerometer parameters in any way, so you might have a configuration which it doesn't like. In particular, the threshold setting can cause problems. If this happens to you, try this: # echo 0 /sys/devices/platform/lis302dl.2/threshold Comments or abuse to this address as ever, Tom ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Optimization team update (11/23 ~ 11/29)
John Lee wrote: On Fri, Dec 05, 2008 at 10:28:48AM +0100, Andreas Fischer wrote: Hi All, During today's upgrade I encountered the following error: * ERROR: The following packages conflict with openmoko-phoneprofile-data: * qtopia-phone-x11-profile-data * How should I proceed? Uninstall one of these? remove qtopia-phone-x11-profile-data and install openmoko-phoneprofile-data That seemed to work. Thank you. openmoko-phoneprofile-data is already in Om2008.9 so I wonder why you have qtopia-phone-x11-profile-data installed. I have no idea, actually. Maybe some remnant of an update? I certainly didn't install it on purpose... Regards, Andreas Regards, Andreas John Lee wrote: Dear Community, As Sushama (our new testing team member) indicated in http://lists.openmoko.org/pipermail/devel/2008-November/003493.html , we won't have a release in Nov. Currently the testing team is going to do a full test on the latest testing image. It has all the goodies we did and a lot of improvements over Om2008.9, so please try it and report any error you find. Upgrade howto: From Om2008.9 it's recommanded to upgrade with the following steps: sed -i -e 's%Om2008.8%testing%' /etc/opkg/*.conf /etc/init.d/xserver-nodm stop screen -DR opkg update opkg -force-overwrite upgrade # (please ans Y to all questions) # (the sshd (dropbear) will restart, so you need to reconnect and do # 'screen -DR' again) opkg upgrade shutdown -r now To get the fastest boot time you also need to remove the following packages: opkg remove task-base-nfs task-base-smbfs task-base-bluetooth \ task-base-usbgadget avahi-daemon avahi-autoipd blueprobe \ usb-gadget-mode portmap exquisite exquisite-theme-freerunner \ exquisite-themes Known issues: * GTK redraw problem * some obsolete kernel modules still left in system * must remove 'ro' in kernel boot parameter if you use sd boot. * will purge your incompatible e config, so you might need to set stuffs like suspend time again. Echo: Since there are different hw versions out there (a5, a6, a7), it's impossible to provide one alsa state file that suits all models. However, it seems you can always find appropriate values for your neo. My way is to adjust control.4 Speaker Playback Volume in /usr/share/openmoko/scenarios/gsmhandset.state the max value is 127, 95 works best on my a5. With volume level 3 or 4 in qtopia dialer, the other side can hear no echo while I get good audio quality. Team update: Tick helped to put his touchscreen improvement into stable-tracking, he will work on opkg internals next. Olv moved to look into kernel and fso. Erin will try bluetooth. Julian is working on the GTK redraw issue, please help him out. Jeremy will fix some qtopia bugs and keep working on suspend/resume issues. Regards, John ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[OM2008.8][testing] qpe no longer respects QTOPIA_PHONE_DEVICE ?
After today's testing upgrade, QPE is ignoring env var QTOPIA_PHONE_DEVICE and going right for /dev/ttySAC0 instead of a /dev/pts* like I want it to. What is the new way to make it pick another device? Surely you devs haven't forgotten there are people using gsm0710muxd?... ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [OM2008.8][testing] qpe no longer respects QTOPIA_PHONE_DEVICE ?
I'm also noticing today that the batget utility is blocking (using top), sometimes several instances get caught up and the phone starts to slow. removed the battery module (its utterly useless in illume anyway) and things run much better. Overall though, there are fewer problems than 2008.9 :) BillK On Fri, 2008-12-05 at 11:42 +, Vasco Névoa wrote: After today's testing upgrade, QPE is ignoring env var QTOPIA_PHONE_DEVICE and going right for /dev/ttySAC0 instead of a /dev/pts* like I want it to. What is the new way to make it pick another device? Surely you devs haven't forgotten there are people using gsm0710muxd?... ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- William Kenworthy [EMAIL PROTECTED] Home in Perth! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [android] Maps application
On Fri, Dec 5, 2008 at 09:04, Cédric Berger [EMAIL PROTECTED] wrote: - I finally got a GPS fix ! (but I really miss a simple GPS application to see basic GPS data.) But Maps crashes as soon as GPS has got a fix. ( ClassCastException when trying to locate on map). I lost my log file so I need to do another test (and get a fix) to get the exact class Any idea ? : Finally got the log when trying to locate : /AndroidRuntime( 5729): Shutting down VM W/dalvikvm( 5729): threadid=3: thread exiting with uncaught exception (group=0x40010e28) E/AndroidRuntime( 5729): Uncaught handler: thread main exiting due to uncaught exception E/AndroidRuntime( 5729): java.lang.ClassCastException: android.graphics.drawable.BitmapDrawable E/AndroidRuntime( 5729):at com.google.android.maps.MyLocationOverlay.getLocationDot(MyLocationOverlay.java:179) E/AndroidRuntime( 5729):at com.google.android.maps.MyLocationOverlay.drawMyLocation(MyLocationOverlay.java:541) E/AndroidRuntime( 5729):at com.google.android.maps.MyLocationOverlay.draw(MyLocationOverlay.java:491) E/AndroidRuntime( 5729):at com.google.android.maps.OverlayBundle.draw(OverlayBundle.java:45) E/AndroidRuntime( 5729):at com.google.android.maps.MapView.onDraw(MapView.java:451) E/AndroidRuntime( 5729):at android.view.View.draw(View.java:5352) E/AndroidRuntime( 5729):at android.view.ViewGroup.drawChild(ViewGroup.java:1436) E/AndroidRuntime( 5729):at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1208) E/AndroidRuntime( 5729):at android.view.ViewGroup.drawChild(ViewGroup.java:1434) E/AndroidRuntime( 5729):at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1208) E/AndroidRuntime( 5729):at android.view.ViewGroup.drawChild(ViewGroup.java:1434) E/AndroidRuntime( 5729):at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1208) E/AndroidRuntime( 5729):at android.view.View.draw(View.java:5355) E/AndroidRuntime( 5729):at android.widget.FrameLayout.draw(FrameLayout.java:324) E/AndroidRuntime( 5729):at com.android.internal.policy.impl.PhoneWindow$DecorView.draw(PhoneWindow.java:1701) E/AndroidRuntime( 5729):at android.view.ViewRoot.draw(ViewRoot.java:980) E/AndroidRuntime( 5729):at android.view.ViewRoot.performTraversals(ViewRoot.java:829) E/AndroidRuntime( 5729):at android.view.ViewRoot.handleMessage(ViewRoot.java:1103) E/AndroidRuntime( 5729):at android.os.Handler.dispatchMessage(Handler.java:88) E/AndroidRuntime( 5729):at android.os.Looper.loop(Looper.java:123) E/AndroidRuntime( 5729):at android.app.ActivityThread.main(ActivityThread.java:3742) E/AndroidRuntime( 5729):at java.lang.reflect.Method.invokeNative(Native Method) E/AndroidRuntime( 5729):at java.lang.reflect.Method.invoke(Method.java:515) E/AndroidRuntime( 5729):at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:739) E/AndroidRuntime( 5729):at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:497) E/AndroidRuntime( 5729):at dalvik.system.NativeStart.main(Native Method) I/Process ( 869): Sending signal. PID: 5729 SIG: 3 I/dalvikvm( 5729): threadid=7: reacting to signal 3 I/dalvikvm( 5729): Wrote stack trace to '/data/anr/traces.txt' - Note that I also have a lot of these logs. Maybe normal since I have no connection so no map tiles available, but it should not try (and fail) to show empty tiles... D/skia( 5729): xxx jpeg error 53 Not a JPEG file: starts with 0x%02x 0x%02x E/MapView ( 5729): IllegalStateException on drawMap. Wiping cache. E/MapView ( 5729): java.lang.IllegalStateException: Null Bitmap!/loading_tile.png=17301864 E/MapView ( 5729): at com.google.common.graphics.android.AndroidImage.init(Unknown Source) E/MapView ( 5729): at com.google.common.graphics.android.AndroidImageFactory.createImage(Unknown Source) E/MapView ( 5729): at com.google.googlenav.map.MapTile.c(Unknown Source) E/MapView ( 5729): at com.google.googlenav.map.MapTile.getImage(Unknown Source) E/MapView ( 5729): at com.google.googlenav.map.Map.a(Unknown Source) E/MapView ( 5729): at com.google.googlenav.map.Map.drawMap(Unknown Source) E/MapView ( 5729): at com.google.android.maps.MapView.drawMap(MapView.java:997) E/MapView ( 5729): at com.google.android.maps.MapView.onDraw(MapView.java:443) E/MapView ( 5729): at android.view.View.draw(View.java:5352) E/MapView ( 5729): at android.view.ViewGroup.drawChild(ViewGroup.java:1436) E/MapView ( 5729): at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1208) E/MapView ( 5729): at android.view.ViewGroup.drawChild(ViewGroup.java:1434) E/MapView ( 5729): at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1208) E/MapView ( 5729): at android.view.ViewGroup.drawChild(ViewGroup.java:1434) E/MapView ( 5729): at
Re: [OM2008.x] praise for the new testing image
2008/12/5 Vadim, Efimov [EMAIL PROTECTED]: On Fri, 05 Dec 2008 08:05:19 +0300, John Lee [EMAIL PROTECTED] wrote: I would like to know how many people need this. My resource for qtopia is very limited and I need to decide what to fix first. mmm... how many people need USSD ? In Russia it is difficult get balance other way, and the USSD-message comes in cyrillic letters. also, we have many services via USSD... but, i'm not know how many freerunners sold in Russia. at least 20-30. There was a useful message[1] in openmoko-russia Google Groups list from Pavel Fertser, which essentially said: 1) First open one console and say: # mdbus -s -l org.freesmartphone.frameworkd /org/freesmartphone/GSM/Device It will log everything device receiving. 2) Then issue following command in another console: # mdbus -s org.freesmartphone.frameworkd /org/freesmartphone/GSM/Device org.freesmartphone.GSM.Network.SendUssdRequest *102# 3) You should see network's answer in first window. Replace *102# with a sequence of your GSM operator. [1] http://groups.google.ru/group/openmoko-russia/msg/8018ee80bc2fab7a ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
microsSD doesn't mount any more!
Dear Group, I know that this topic isn't new to that list but after spending a lot of time searching the archives, I decided to re-initiate it cause didn't find a solution and got rather confused :( I recently installed a new Transcend microSD 8GB card and FR did recognize it without any problem! I then tried debian on FR, and the card was partitioned accordingly! After that, needed the card for soemthing else, did re-partition it on a debian box (fdisk, mkfs) and when I re-inserted in FR it doesn't get recognised any more! When in BootLoader, shows that there is a card of 3MB and when I boot with the latest 2008.9 jffs I get following dmesg output: [ 30.365000] Buffer I/O error on device mmcblk0, logical block 8 [ 34.83] FAT: bogus logical sector size 65535 [ 34.83] VFS: Can't find a valid FAT filesystem on dev mmcblk0. [ 34.84] FAT: bogus logical sector size 65535 [ 34.84] VFS: Can't find a valid FAT filesystem on dev mmcblk0. I know that other people had similar or exactly the same problem but couldn't figure out if they found a solution to that. Any help is much appreciated. Thanks Tony ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [latest 2008.9] USB issues?
On Thu, Dec 4, 2008 at 7:13 AM, John Lee [EMAIL PROTECTED] wrote: On Tue, Dec 02, 2008 at 06:34:09PM +0100, Tony Berth wrote: Dear list, I just installed the latest 2008.9 kernel and jffs2 and when I connect to a debian 4 box it doesn't get listed as a USB device. As a result, I can't establish USB networking. Am I doing something wrong here? Thanks Tony opkg will execute the postinst script during first boot, so modules won't work properly until 2nd boot. https://docs.openmoko.org/trac/ticket/2096 - John just for the list archives, when I re-booted and had FR connected via USB the problem didn't show up any more! So I guess that was the reason Thanks ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Battery charge
Hi to all, i've flashed my new neo twice without full charging before and i had problems to boot at the second time (i guess energy issue). So i've booted successfully the neo with an external battery, plug in the charger and repleced the external battery with the neo battery. Now the problem is that the battery indicator is still red and seems don't charge my battery, in the mean time the aux led is on.. what's mean? is it normal? what's mean the aux led always on? is my battery charging? thanks very much -- Be Yourself @ mail.com! Choose From 200+ Email Addresses Get a Free Account at www.mail.com ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[Qt Extended]Graphical server doesn't boot
I'm using Qt Extended 4.4.2 flashed into the phone (Freerunner). For weeks it has worked perfectly (or the most perfect a distribution can work on the neo). This morning, it went out of battery. I don't know if it booted correctly, since I was sleeping. When I have plugged it into the computer, it doesn't boot. Well, at least not Qt Extended. The boot process goes well, it casts the same amount of error as usual, but at one point this happens: Starting at daemon atd. splash-write: appplet not found Segmentation fault Then, the screen is deleted and you only see a text cursor flashing, like it was loading a graphical server. From time to time, it seems it try to bring some screen, but fails (I think I cannot explain better). Net is initialized, so I can ssh into my phone, but I don't know what to do. I have no found sytem logs, nor graphical server log, nor anyother useful log. I have looked in the list, but no one seems to have the same problem. Any advice? (It was important that I had my phone usable today T_T). signature.asc Description: Esta parte del mensaje está firmada digitalmente ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: microsSD doesn't mount any more!
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Somebody in the thread at some point said: | When in BootLoader, shows that there is a card of 3MB and when I | boot with the latest 2008.9 jffs I get following dmesg output: U-Boot driver doesn't understand enough SHDC to get this right, but it doesn't hurt anything unless you try to get U-Boot to touch anything above 4GB. | | [ 30.365000] Buffer I/O error on device mmcblk0, logical block 8 Are there some glamo-mci errors floating around before that? - -Andy -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAkk5MHYACgkQOjLpvpq7dMrj9QCfbXf7x2O6jtB0X+SfRTv/0e8k M2gAnjxeXYIDq53UrZC+mcAhm1zI02fR =jDld -END PGP SIGNATURE- ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Funding Global Domination
Arigead wrote: [...] Thanks for the info all, as Arne correctly spotted I was only interested in helping fund global domination, which does not come for free. I can design my own T Shirt and have it made but benefit to OM = Zero. Not interested in this at all. If OM have made it clear they are not into derived products then that answers the question I asked and the subject is closed. There is always the benefit of free marketing, when someone wear a shirt with openmoko or similiar on it. They may sell more phones. Or you could sell T-shirts, and collect some money to fund a developer for some time. Better software gives more sales. There are other ways of support than direct money transfer, if you're interested. Helge Hafting ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
gpsdcontrol 0.4 is out
(sorry for my bad english) i have released a new version of gpsdcontrol http://wiki.openmoko.org/wiki/Gpsdcontrol gpsdcontrol is a simple script for turn on/off gpsd and gps antenna in a simple icon on the desktop now there is a new icon which change if gpsd is running or not, and blue led is turning on/off with gpsd ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: microsSD doesn't mount any more!
On Fri, Dec 5, 2008 at 2:45 PM, Andy Green [EMAIL PROTECTED] wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Somebody in the thread at some point said: | When in BootLoader, shows that there is a card of 3MB and when I | boot with the latest 2008.9 jffs I get following dmesg output: U-Boot driver doesn't understand enough SHDC to get this right, but it doesn't hurt anything unless you try to get U-Boot to touch anything above 4GB. | | [ 30.365000] Buffer I/O error on device mmcblk0, logical block 8 Are there some glamo-mci errors floating around before that? - -Andy -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAkk5MHYACgkQOjLpvpq7dMrj9QCfbXf7x2O6jtB0X+SfRTv/0e8k M2gAnjxeXYIDq53UrZC+mcAhm1zI02fR =jDld -END PGP SIGNATURE- here it is: --- [ 30.225000] glamo-mci glamo-mci.0: Error after cmd: 0x8020 [ 30.225000] mmcblk0: error -110 sending read/write command [ 30.23] end_request: I/O error, dev mmcblk0, sector 0 [ 30.23] Buffer I/O error on device mmcblk0, logical block 0 [ 30.24] glamo-mci glamo-mci.0: Error after cmd: 0x20 [ 30.24] glamo-mci glamo-mci.0: Error after cmd: 0x120 [ 30.245000] mmcblk0: error -110 sending read/write command [ 30.25] end_request: I/O error, dev mmcblk0, sector 8 [ 30.25] Buffer I/O error on device mmcblk0, logical block 1 [ 30.255000] glamo-mci glamo-mci.0: Error after cmd: 0x8020 [ 30.255000] glamo-mci glamo-mci.0: Error after cmd: 0x8122 [ 30.26] mmcblk0: error -84 sending read/write command [ 30.265000] end_request: I/O error, dev mmcblk0, sector 16 [ 30.265000] Buffer I/O error on device mmcblk0, logical block 2 [ 30.27] glamo-mci glamo-mci.0: Error after cmd: 0x20 [ 30.275000] glamo-mci glamo-mci.0: Error after cmd: 0x122 [ 30.28] mmcblk0: error -84 sending read/write command [ 30.285000] end_request: I/O error, dev mmcblk0, sector 24 [ 30.285000] Buffer I/O error on device mmcblk0, logical block 3 [ 30.30] glamo-mci glamo-mci.0: Error after cmd: 0x8020 [ 30.30] mmcblk0: error -110 sending read/write command [ 30.305000] end_request: I/O error, dev mmcblk0, sector 0 [ 30.305000] Buffer I/O error on device mmcblk0, logical block 0 [ 30.36] glamo-mci glamo-mci.0: Error after cmd: 0x20 [ 30.36] mmcblk0: error -110 sending read/write command [ 30.365000] end_request: I/O error, dev mmcblk0, sector 64 [ 30.365000] Buffer I/O error on device mmcblk0, logical block 8 [ 34.83] FAT: bogus logical sector size 65535 [ 34.83] VFS: Can't find a valid FAT filesystem on dev mmcblk0. [ 34.84] FAT: bogus logical sector size 65535 [ 34.84] VFS: Can't find a valid FAT filesystem on dev mmcblk0. Thanks ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: ntpd status?
William Kenworthy wrote: How can I find the status for a running ntpd? On desktops, I use ntpq, but this doesnt seem available on the FR - I have ntp, ntpdate and ntp-utils installed so far. grepping the logread for ntp messages isnt enough to see whats going on :( BillK I also searched for ntpq and it seems that it wont be possible to find this information unless someone reforms the ntpd package. signature.asc Description: OpenPGP digital signature ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [OM2008.x] praise for the new testing image
Vadim, Efimov wrote: how many freerunners sold in Russia. at least 20-30. More than 50. And also the same issue. UUSD is the only way for me to get the info for balance, so I don't know how much I got now. The only way to get information about it --- they send an SMS if I am close to 0 balance. signature.asc Description: OpenPGP digital signature ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: First impressions on new Android rootfs
Gothnet wrote: Please forgive me for replying to so many of my own emails... ... that helps more than is annoing ;) Gothnet wrote: Apparently the answer is setprop net.usb0.dns1 $IP_ADDRESS Try setprop net.dns1 $IP_ADDRESS (just without the network device) for me then dns worked reliably. I did setup an bluetooth connection with bnep to my linux pc. Actually the same way as from every other gta02 distro (http://wiki.openmoko.org/wiki/Manually_using_Bluetooth) . Except I had to do an hciconfig hci0 up on android. To keep the browser from crashing I had not only to remove rm /data/data/com.android.browser/app_plugins/gears.so but as well rm /data/data/com.android.browser/app_plugins/gears-0.4.23.0/* rm /data/data/com.android.browser/app_plugins/gears-0.4.23.0 All this done in adb shell, which I got with: - download the file adb from http://people.openmoko.org/sean_mcneil/ an make it executable - cd into the dir where you have adb downloaded - connect freerunner with usb cable and start android on it - as root: ifconfig usb0 192.168.0.199 up - kill process adb fork-server server if running (find it with: ps aux | grep adb) - then do as root ADBHOST=192.168.0.202 ./adb shell You should then have a console on your freerunner running android: * daemon not running. starting it now * * daemon started successfully * # My current freerunner android setup: Bootloader: http://people.openmoko.org/andy/qi-s3c2442-master_2ad3ce6ff57753e3.udfu (01-Dec-2008 02:23 26K) [s3c2442 is for GTA02] Kernel: http://people.openmoko.org/sean_mcneil/uImage-android (04-Dec-2008 05:28 2.4M) Rootfs: http://people.openmoko.org/sean_mcneil/androidfs.jffs2 (05-Dec-2008 04:18 32M) Thanks for all your contributions, Sean first, of course! Schöngruß Ulle -- View this message in context: http://n2.nabble.com/First-impressions-on-new-Android-rootfs-tp1603648p1619210.html Sent from the Openmoko Community mailing list archive at Nabble.com. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Funding Global Domination
Hi Steve and all, I would at least take a look at zazzle.com before going with cafepress. When I started a (very small) tshirt site a few years ago, I chose it over cafepress for various reasons that I can't exactly remember (most likely commission rates and product selection). Eric Steve Mosher wrote: Let me look into doing this on cafepress. Marcel wrote: That would be soo geeky, great idea! :D -- Marcel Am Thursday 04 December 2008 14:23:40 schrieb Steve Mosher: please do. DJDAS wrote: Arigead ha scritto: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Minh Ha Duong wrote: Le mercredi 03 décembre 2008, arne anka a écrit : The second option is more like it. It takes a few hours to design a T-Shirt and upload it to an online store where everybody else can go and buy it. So just do it: the entry costs are so low that there is no real need for a formal market study ! Rui: There are lots of cool artwork under a Cc: license on the wiki including the hardware schematics and What about making a T-shirt with the hardware schematics? ;) ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [OM2008.8][testing] qpe no longer respects QTOPIA_PHONE_DEVICE ?
There is no problem with QPE and the QTOPIA_PHONE_DEVICE var. The problem is that gsm0710muxd gets started twice (via rc.d init scripts AND the dbus request inside 89qtopia) and QPE gets a bogus ptsvar and falls back to /dev/ttySAC0. I removed the rc.d startup of the muxer because dbus is capable of launching it upon request: update-rc.d -f gsm0710muxd remove And it all works (GSM+GPRS)! :) Citando William Kenworthy [EMAIL PROTECTED]: I'm also noticing today that the batget utility is blocking (using top), sometimes several instances get caught up and the phone starts to slow. removed the battery module (its utterly useless in illume anyway) and things run much better. Overall though, there are fewer problems than 2008.9 :) BillK On Fri, 2008-12-05 at 11:42 +, Vasco Névoa wrote: After today's testing upgrade, QPE is ignoring env var QTOPIA_PHONE_DEVICE and going right for /dev/ttySAC0 instead of a /dev/pts* like I want it to. What is the new way to make it pick another device? Surely you devs haven't forgotten there are people using gsm0710muxd?... ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- William Kenworthy [EMAIL PROTECTED] Home in Perth! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
How to wear the headphones?
I find that the headphones quickly fall out of my ears. Is this a health feature, or am I doing something wrong? Regards, Neil ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: How to wear the headphones?
aren't there spare ear pieces with different sizes? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [OM2008.x] praise for the new testing image
John Lee wrote: On Thu, Dec 04, 2008 at 06:05:04PM +, Vasco Névoa wrote: Yes, that's how I get my ballance... it's the operator that automatically sends it at hangup. I confirm that the dialer exits when we try to do it upon request... I would like to know how many people need this. My resource for qtopia is very limited and I need to decide what to fix first. In Italy only an operator uses it, but I'm using it; that's why I've researched so much about this :P. Btw, the fact that the dialer exits after dialed, it's normal (it should indicate that the USSD request has been placed). The problem with the latest qtopia-x11, however, is that it uses a wrong way to send the request. I'm using a workaround to it (the patch is in trac) but I know that could be improved. I don't know if I can easily provide binaries since my qtopia build has many other diffs... -- Treviño's World - Life and Linux http://www.3v1n0.net/ ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: How to wear the headphones?
2008/12/5 Neil Jerram [EMAIL PROTECTED]: 2008/12/5 arne anka [EMAIL PROTECTED]: aren't there spare ear pieces with different sizes? I thought so at first, but on closer examination, they all appeared to be the same size... (I assume you mean the flexible rubber-like bits.) ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [android] Building Android from the Koolu Source
Jim Ancona wrote: I've been able to successfully build an Android rootfs from the Koolu repository. When flashed to my phone with the kernel that Sean provided, it runs with just about the same set of issues as the images that Sean has put up. I've documented how I did it on the wiki at: http://wiki.openmoko.org/wiki/Android#Building_the_Koolu_Android_Source Have you been able to get the emulator working with the build sysimage? In my experience, the emulator came up but the phone stays always with a black screen while my CPU us over-used. I've waited some minutes but nothing happens... Is this maybe due to the fact that the android-freerunner distro tries to set some values valid only for GTA0x hardware (i.e. /sys nodes)? How would you suggest to develop using the koolu tree without testing in real hardware? -- Treviño's World - Life and Linux http://www.3v1n0.net/ ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [OM2008.8][testing] qpe no longer respects QTOPIA_PHONE_DEVICE ?
Vasco Névoa wrote: After today's testing upgrade, QPE is ignoring env var QTOPIA_PHONE_DEVICE and going right for /dev/ttySAC0 instead of a /dev/pts* like I want it to. What is the new way to make it pick another device? Surely you devs haven't forgotten there are people using gsm0710muxd?... About this theme... Anyone knows what the zecke qtopia-muxer git tree [1] is actually doing? I've not tested it, but would it avoid the usage of gsm0710muxd to get the framework running in qtopia-x11? [1] http://git.openmoko.org/?p=zecke/qtopia-muxer.git;a=summary -- Treviño's World - Life and Linux http://www.3v1n0.net/ ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Battery charge
On Friday 05 December 2008, Giorgio Marci wrote: Hi to all, i've flashed my new neo twice without full charging before and i had problems to boot at the second time (i guess energy issue). So i've booted successfully the neo with an external battery, plug in the charger and repleced the external battery with the neo battery. Now the problem is that the battery indicator is still red and seems don't charge my battery, in the mean time the aux led is on.. what's mean? is it normal? what's mean the aux led always on? is my battery charging? It depends which version of which distro, and possibly which kernel. In at least one case the red aux LED was used to indicate charging, while some versions of the battery indicator don't always pick up the transitions. You can always use the /sys interface to find out what the kernel thinks is going on with the battery. See the links below. http://wiki.openmoko.org/wiki/GTA02_sysfs#power_supply_battery_information http://wiki.openmoko.org/wiki/GTA02_sysfs#PMU_info ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
QTerminal
Hi, Is possible to install QTerminal on QT 4.4.2 ? I try but dont work! Thanks, Samuel ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Openmoko cronology
Am 10.11.2008 um 00:56 schrieb David Samblas: I want to do a presentation for next friday and one of the point I want to reflex is the quick evolution of the Openmoko project but I realize there is no place with a clear cronologie so I will try to post things I have found spreaded in wiki, press releases and over the web to try to have some kind of time line. ? 2006 Openmoko was anounced by his founder FIC 2. Nov 2006: http://www.linuxdevices.com/news/NS2986976174.html Nov 2006 Openmoko annouce the Neo1973 Jul 2007 Neo1973 out to the real world Jan 2008 Openmoko announce the Neo FreeRunner Feb 2008 Last Neo1973 sold from Openmoko Jun 2008 Neo FreeRunner Hits the real world Jul 2008 FSO milestone 2 Aug 2008 OM2008.8, Debian on Freerunner, Qtopia 4.3.2, Schematics published Sep 2008 FSO milestone 3, FDOM, NeoTool, Gentoo, Gestures, Remoko,Numptyphisycs Oct 2008 Qt Extended 4.4.1, OM2008.9, http://opkg.org, more than 7 web browsers, rasteman illume images,QI,Duke3d, Pingus Nov 2008 Android beta image, FDOMizer, QT EXtended 4.4.2, Doom Help will be apreciated I want to matain it as simple as posible to presentetation but a more detailed on in the wiki will be awesome to have ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: How to wear the headphones?
On Friday 05 December 2008, Neil Jerram wrote: 2008/12/5 Neil Jerram [EMAIL PROTECTED]: 2008/12/5 arne anka [EMAIL PROTECTED]: aren't there spare ear pieces with different sizes? I thought so at first, but on closer examination, they all appeared to be the same size... (I assume you mean the flexible rubber-like bits.) That's the ones. Mine came with 3 different sizes. They provide next to no isolation, and sound quite bad anyway. I suggest cutting off the headphones and adding a 3.5mm stereo socket so you can use some decent headphones. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: How to wear the headphones?
2008/12/5 Al Johnson [EMAIL PROTECTED]: On Friday 05 December 2008, Neil Jerram wrote: 2008/12/5 Neil Jerram [EMAIL PROTECTED]: 2008/12/5 arne anka [EMAIL PROTECTED]: aren't there spare ear pieces with different sizes? I thought so at first, but on closer examination, they all appeared to be the same size... (I assume you mean the flexible rubber-like bits.) That's the ones. Mine came with 3 different sizes. OK, thanks Arne and Al; I obviously need to look again at those. They provide next to no isolation, and sound quite bad anyway. I suggest cutting off the headphones and adding a 3.5mm stereo socket so you can use some decent headphones. As a last resort, I guess. Thanks, Neil ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [android] Building Android from the Koolu Source
Marco Trevisan (Treviño) wrote: Have you been able to get the emulator working with the build sysimage? In my experience, the emulator came up but the phone stays always with a black screen while my CPU us over-used. I've waited some minutes but nothing happens... Is this maybe due to the fact that the android-freerunner distro tries to set some values valid only for GTA0x hardware (i.e. /sys nodes)? How would you suggest to develop using the koolu tree without testing in real hardware? I doubt the Android emulator would work because it emulates different hardware--not even the same CPU instruction set as the Freerunner. You could try the Openmoko QEMU emulator. See the wiki at: http://wiki.openmoko.org/wiki/QEMU If that works please update the info on the wiki! Jim ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
