Free runner doesnot power up
Hi, I have not been using my free runner for about a week.I tried to turn it on by pressing the power button but it does not.I have plugged in the Charger and pressed the power button but still it does not turn on .I even tried NOR boot with Aux and power button but still it does not turn on.Is it that the device is dead or the battery just need to be charged for some hours before I can use it again? Please let me know.(It is chaos for me right now). Thanks and Regards Sriranjan ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Free runner doesnot power up
On Sat, Aug 8, 2009 at 11:58 AM, RANJAN infi...@gmail.com wrote: Hi, I have not been using my free runner for about a week.I tried to turn it on by pressing the power button but it does not.I have plugged in the Charger and pressed the power button but still it does not turn on .I even tried NOR boot with Aux and power button but still it does not turn on.Is it that the device is dead or the battery just need to be charged for some hours before I can use it again? Just take the battery out once, put it back again and let it charge for a couple of hours and it will work. Or use a nokia BL 4 or BL 5 battery to start it up. Better still read the power FAQ on the wiki. Rakshat Please let me know.(It is chaos for me right now). Thanks and Regards Sriranjan _ ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [shr] illume keyboard problem when rotating screen
I'm trying now literki... but what about if i would like to continue to use illume predictive keyboard that works fine (at least not in landscape mode)? thanks for your reply d On 8/8/09, William Kenworthy bi...@iinet.net.au wrote: On Fri, 2009-08-07 at 16:44 -0700, jeremy jozwik wrote: On Fri, Aug 7, 2009 at 4:36 PM, Davide Scainidsca...@gmail.com wrote: hi mates, i'm using shr-u every day updated ... danger is my hobby. i'm experiencing some problems when i rotate the screen: illume keyboard does not fit anymore and i cannot pop it out. thats not only a problem on the newest version. little things like that is why i switched to literki. now if only he would re-code the vibrate feature i would be super happy moko guy How did you get around apps popping up the illume keyboard? - if I try and use the wrench menus to turn the illume keybord off enlightenment starts segfaulting :( BillK ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Micro SD question
search on the*wiki, there is a full page with working and non working sd cards... d On 8/8/09, Damian Spriggs damianspri...@mac.com wrote: I've had no problems with my Trancend 8Gb on SHR, Hackable, or Android. On Aug 7, 2009, at 11:54 PM, Cristian Gómez wrote: Hi all, I'm waiting for my FR (can't wait). I'm following the list and see some messages complaining about problems with some micro SD cards (like Kingston) I want your opinions about what memory should I buy. Does a Markvision one work correctly? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Unabel to SSH into Neo Freerunner
On Fri, 7 Aug 2009 01:37:00 pm Mikhail Umorin wrote: AFAIK android does not have ssh server. you can use adb to connect. You're quite correct, Tom will need to do adb shell instead. cheers, Chris -- Chris Samuel : http://www.csamuel.org/ : Melbourne, VIC This email may come with a PGP signature as a file. Do not panic. For more info see: http://en.wikipedia.org/wiki/OpenPGP signature.asc Description: This is a digitally signed message part. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Freerunner audio channels
David Fokkema dfokk...@ileos.nl writes: The fact that Freerunners differ in audio quality and settings has been stated on this list and on support. And going by the last paragraph, this is true. So, _why_ are Freerunners different? One of the problems is that some freerunner revisions are in fact different in hardware. Most devices have 1uF capacitors instead of R3004/R3005 (which should be 0R), and that's not a joke. That is earpiece path and not surprisingly that devices that have those capacitors have considerably lower sound volume from the earpiece. Unfortunately, there's no way to find out which devices are affected by this bug judging only by revision and serial number as BOMs were lost due to an incorrect file format conversion, one needs to actually try and see for himself. AFAICT A7s are affected while at least some A6s (mine e.g.) not. -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:fercer...@gmail.com ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Help with FSO calls timeouts (was: (om2009) OpenBmap client keeps crashing)
I reflashed om2009 (latest unstable) only to see that paroli can't always login to network (well actually now that I mention it, I was able to see it also on the previous isntallatin - paroli often gave me the about 10 error messages..) here are last lines from /var/log/paroli.log http://pastebin.com/m18850984 otoh frameork log doesn't know anything about this: http://pastebin.com/m37b98cf3 (lines printed with tail) Is it paroli or fso that's failing? I might be able to provide more logs if needed r -- | risto h. kurppa | risto at kurppa dot fi | http://risto.kurppa.fi ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
GPS position accuracy and refresh rate?
Hi, Does anyone have the exact spec sheet or data sheet for the GPS chipset of the free runnner? Thanks and Regards Sriranjan ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Freerunner for sale! (Germany)
Hi! I'm selling my Freerunner (originally sold by Pulster). I used it for about a year, so it's not really in mint condition, but it's ok. Everything works, but there's a small (3mm) but visible scratch in the middle of the display. I got the buzzfix by golden delicious, so it comes with a second new battery. You get everything from the original packaging: Openmoko Freerunner with Buzzfix Power cable with two adaptors Laserpen (w/o batteries) USB-cable black/green box Invoice 2 original batteries 512MB uSD-card Original Invoice and Handbook. If you are interested, make me a reasonable offer in EURO via mail: j(at)donalbain.de Don't hesitate to write me in case of questions or if you would like photos. j�...@home ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[shr-u] contacts outside sim?
hi, i've just flashed from 0m2009 to shr-u, and for the first time in about a year, i'm somewhat confident that i'll be actually able to use my freerunner for phone calls! there's only one thing i'm sorely missing ( and haven't really found an answer to apart from a rather short note on http://wiki.openmoko.org/wiki/SHR#Address_Book ): is storing contacts on the sim really the only option currently? is there work going on to also enable storing on sd or flash? any estimates when it will be ready? regards, bernhard ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [shr-u] contacts outside sim?
i've just flashed from 0m2009 to shr-u, and for the first time in about a year, i'm somewhat confident that i'll be actually able to use my freerunner for phone calls! there's only one thing i'm sorely missing ( and haven't really found an answer to apart from a rather short note on http://wiki.openmoko.org/wiki/SHR#Address_Book ): is storing contacts on the sim really the only option currently? is there work going on to also enable storing on sd or flash? any estimates when it will be ready? i would appreciate if you and any other users new to shr could check the SHR User Manual during your transition and let me know if anything is missing. This contacts outside SIM certainly is, perhaps i will add FAQ section... thank you Petr ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Qalee 0.0.3 released
Qalee 0.0.3 is out !!!See annoucement @ http://think-free.homelinux.org/wordpress/ -- __ http://think-free.homelinux.org ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Screen in FR goes black and white after resume from suspend
Hi, The screen in my FR goes B/W with weird lines after it resumes from suspend.Got to know it is WSOD bug (or sometimes resumes in grey scale mode) .Well temporarily I can change the FR not to suspend but I have to do so after every reboot.Any solutions? Thanks and Regards Sriranjan ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Screen in FR goes black and white after resume from suspend
On Sat, Aug 8, 2009 at 11:40 PM, RANJAN infi...@gmail.com wrote: Hi, The screen in my FR goes B/W with weird lines after it resumes from suspend.Got to know it is WSOD bug (or sometimes resumes in grey scale mode) .Well temporarily I can change the FR not to suspend but I have to do so after every reboot.Any solutions? Thanks and Regards Sriranjan Use a kernel where WSOD is fixed. It was back in some of the kernels. Rakshat ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
RE: Unabel to SSH into Neo Freerunner
Hi there, So far no luck with getting an SSH connection to the FreeRunner. I've followed the wiki man pages to the letter (http://wiki.openmoko.org/wiki/USB_Networking) as Angus suggests. But this did not change the result. Basically these were the same steps I was already doing (except I need to modprobe g_ehter first). I'm still getting the no route to host error. Disabling my PC wlan connection does not help. Any thoughts? Niels. -- Microsoft gives you windows, Linux gives you the whole house. From: nyt...@openmoko.org To: community@lists.openmoko.org Date: Fri, 7 Aug 2009 08:44:16 -0600 Subject: Re: Unabel to SSH into Neo Freerunner On August 6, 2009 09:07:40 pm c_c wrote: Hi, I also get the following error :- usb 2-2: new full speed USB device using ohci_hcd and address 7 usb 2-2: configuration #1 chosen from 2 choices eth1: register 'cdc_ether' at usb-:00:0b.0-2, CDC Ethernet Device, 00:1f:11:01:2a:26 eth1: no IPv6 routers present Something to do with ipv6? No it means it has been allocated eth1 because it has a static MAC address. So any setup you do on the PC side needs to be for eth1 and not usb0 http://wiki.openmoko.org/wiki/USB_Networking Angus ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community _ Hebben jij en je vrienden leuke foto's van jullie feestje? Maak een groepsalbum en geniet nog extra na. http://www.microsoft.com/belux/nl/windows/windowslive/products/photos.aspx ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Screen in FR goes black and white after resume from suspend
Or use uboot and not qi 2009/8/8 rakshat hooja raks...@gmail.com On Sat, Aug 8, 2009 at 11:40 PM, RANJAN infi...@gmail.com wrote: Hi, The screen in my FR goes B/W with weird lines after it resumes from suspend.Got to know it is WSOD bug (or sometimes resumes in grey scale mode) .Well temporarily I can change the FR not to suspend but I have to do so after every reboot.Any solutions? Thanks and Regards Sriranjan Use a kernel where WSOD is fixed. It was back in some of the kernels. Rakshat ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Help with FSO calls timeouts (was: (om2009) OpenBmap client keeps crashing)
restarting a couple of times lets me use paroli, gps and everything with no problems! I actually was able to run 4 apps at the same time using gps, not bad! And Paroli connects to gsm networks nicely. Thanks! r -- | risto h. kurppa | risto at kurppa dot fi | http://risto.kurppa.fi ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
RE: Unabel to SSH into Neo Freerunner
On Sat, 2009-08-08 at 20:08 +, Niels Heyvaert wrote: Hi there, So far no luck with getting an SSH connection to the FreeRunner. I've followed the wiki man pages to the letter (http://wiki.openmoko.org/wiki/USB_Networking) as Angus suggests. But this did not change the result. Er... there are a lot of alternatives presented there. You need to be more specific, I'm afraid. Basically these were the same steps I was already doing (except I need to modprobe g_ehter first). You really don't. Really. I mean it. Modprobing g_ether shows up two new usb devices on my machine which are both not my freerunner. I'm using ubuntu 9.04, just like you. I'm still getting the no route to host error. Understandable. Disabling my PC wlan connection does not help. Correct. Any thoughts? I'm pretty sure my previous post (and some other posts as well) pretty much sums it all up: http://lists.openmoko.org/nabble.html#nabble-td3401779|a3402898 If you follow that to the letter, one new interface showed up. That is your freerunner. Good luck! David ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Selling Freerunner - London
I've had requests for more information, so some pictures have been uploaded to: http://www.shockinggrey.com/tiki/tiki-browse_gallery.php?galleryId=2 * The buzz fix has been applied * Earphones, charger, carry case, stylus, new battery (supplied with buzz fix) and original box are included * 2GB Micro SD card included * £172 * SHR installed, but I'm assuming anyone who buys this will be comfortable flashing the device with which ever distro they want, that is the most fun part. Regards ezuall -- View this message in context: http://n2.nabble.com/Selling-Freerunner---London-tp3404284p3410356.html Sent from the Openmoko Community mailing list archive at Nabble.com. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Qalee 0.0.3 released
Christophe M meumeu1...@gmail.com writes: Qalee 0.0.3 is out !!! Would be nice if you told us what the heck it is, being an announcement and all. Right, so I go the webpage and I spent 10 seconds trying to figure out what it was, looking at the screenshots and all and I still don't get it. I could probably figure it out by looking at that page a little more or you can just post a proper announcement. Oh, it's a desktop environment, after spending a minute scrolling down on your webpage. -- Esben Stien is b...@e s a http://www. s tn m irc://irc. b - i . e/%23contact sip:b0ef@ e e jid:b0ef@n n ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Qalee 0.0.3 released
Would be nice if you told us what the heck it is, being an announcement and all. Right, so I go the webpage and I spent 10 seconds trying to figure out what it was, looking at the screenshots and all and I still don't get it. I could probably figure it out by looking at that page a little more or you can just post a proper announcement. Oh, it's a desktop environment, after spending a minute scrolling down on your webpage. it a desktop environment, x server, qt based, pretty nice and fast, with litephone as phone manager. shr image based, mokomaze, tango, dillo, literki preinstalled... don't complain and test it :) it's worth it. oh, btw, it has been mention on the ml previously ;) Petr ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
RE: Unabel to SSH into Neo Freerunner
And so, it worked. As usual, this turned out to be an RTFM problem. I had to use eth2 instead of usb0. By looking at ifconfig -a and dmesg I was able to see that the MAC address on eth2 was the same as the one of the new USB device... This is actually mentioned on the wiki page we were referring to. I tend to skip to the code snippets and only read the paragraphs above and below... Need to take more time to read the valuable bits of text preceding those snippets. Let's hope I learned something from it. Thanks for the help. Niels. -- Microsoft gives you windows, Linux gives you the whole house. From: dfokk...@ileos.nl To: community@lists.openmoko.org Date: Sat, 8 Aug 2009 22:37:27 +0200 Subject: RE: Unabel to SSH into Neo Freerunner On Sat, 2009-08-08 at 20:08 +, Niels Heyvaert wrote: Hi there, So far no luck with getting an SSH connection to the FreeRunner. I've followed the wiki man pages to the letter (http://wiki.openmoko.org/wiki/USB_Networking) as Angus suggests. But this did not change the result. Er... there are a lot of alternatives presented there. You need to be more specific, I'm afraid. Basically these were the same steps I was already doing (except I need to modprobe g_ehter first). You really don't. Really. I mean it. Modprobing g_ether shows up two new usb devices on my machine which are both not my freerunner. I'm using ubuntu 9.04, just like you. I'm still getting the no route to host error. Understandable. Disabling my PC wlan connection does not help. Correct. Any thoughts? I'm pretty sure my previous post (and some other posts as well) pretty much sums it all up: http://lists.openmoko.org/nabble.html#nabble-td3401779|a3402898 If you follow that to the letter, one new interface showed up. That is your freerunner. Good luck! David ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community _ Lentekriebels? Speel samen met je vrienden de spelletjes die Windows Live je aanbiedt! http://www.messengerbillboard.be/nl/play ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[Any] Pianobar
Hey, would someone care to try building a package for FR of Pianobar? That would be really handy. :) http://6xq.net/html/00/17.html -- Thanks, The Digital Pioneer -- Please avoid sending me Word or PowerPoint attachments. See http://www.gnu.org/philosophy/no-word-attachments.html ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Unabel to SSH into Neo Freerunner
On Sun, 9 Aug 2009 06:08:12 am Niels Heyvaert wrote: Basically these were the same steps I was already doing (except I need to modprobe g_ehter first). Um, don't you mean cdc_ether ? That's what I'm using.. -- Chris Samuel : http://www.csamuel.org/ : Melbourne, VIC This email may come with a PGP signature as a file. Do not panic. For more info see: http://en.wikipedia.org/wiki/OpenPGP signature.asc Description: This is a digitally signed message part. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
