the latest i had was:
http://mt1.google.com/vt/lyr...@110&hl=en&x=%d&y=%d&z=%d%s=Galile
and set xyz instead of zxy
On Fri, Oct 30, 2009 at 10:18 PM, Aditya Gandhi wrote:
> whats the latest config to get google maps working on tangogps I need help
> with it too
__
hallo,
i have a problem with my b-speech calypso bluetooth headset and a2dp. i
configured my shr-u (bluez4) as described on
http://wiki.openmoko.org/wiki/A2DP . after starting mplayer to listen to
some music over bluetooth, mplayer stops and bluetoothd gives these errors:
bluetoothd[2938]: Found
O Sábado, 31 de Outubro de 2009, Christian Rüb escribiu:
> Hi,
>
> I had the same problem. Also bookmarks will be saved using comma instead of
> dot a separator (locale settings). As a workaround I unset LC_ALL before
> starting navit (i.e. "Exec=unset LC_ALL; navit" in
> /usr/share/application
On Sat, Oct 31, 2009 at 12:17 PM, foringer wrote:
> You can run FBreader from QX menu. Open QX, in the left down corner tap
> the screen, select Favorites and check E-book reader.
>
Aha, there it is! I wasn't aware that I needed QX for it. Thanks!
> Tips: you can add QX menu to the Favorites,
Good job,
but the package libh1settings0 is missing in debian repository. How can I
solve?
2009/10/31 Michal Brzozowski
> 2009/10/31
>
>> So the OSD keyboard inspired by fatfingershell is now quite
>> nice and useable, especially since the addition of user feedback
>> using vibrator (due to Ra
On Saturday 31 October 2009 02:35:42 Sean Moss-Pultz wrote:
> On Sat, Oct 31, 2009 at 3:46 AM, Doug Jones wrote:
> > (1) Has OpenMoko made the policy decision that filenames will be limited
> > to 8.3?
>
> We're using FAT.
I have a usable grasp of how FAT works, so I figured this would be the ans
I don't have omnewrotate nor do I ever use GPS. So, I don't think
those are the cause.
Now, I'm sure my phone switches towers occasionally. And I have an
extreme case of the recamping issue. I maybe see it more often with
Android-on-Freerunner now that they're doing an adaptive deep-sleep
(whic
31.10.2009 18:03, Warren Baird :
I just started noticing this on an shr-u build updated in early
sept. The only thing I've changed lately is installing
omnewrotate. I also noticed it on an install of the shr-testing
candidate, that also had omnewrotate installed.
I'm going to keep omnewro
Thanks I do use wep
On Sat, Oct 31, 2009 at 9:16 PM, Mario Huelsegge wrote:
>
>
> Aditya Gandhi wrote:
> >
> >
> >> I dont know about encryption problems
> >> And its recursive even after reboot
> >> The aux buttin red led starts blinking after about 5-10 secs
> >>
> >
>
> I got the same proble
I just started noticing this on an shr-u build updated in early sept. The
only thing I've changed lately is installing omnewrotate. I also noticed
it on an install of the shr-testing candidate, that also had omnewrotate
installed.
I'm going to keep omnewrotate installed for a while and see how
Hi,
I had the same problem. Also bookmarks will be saved using comma instead of dot
a separator (locale settings).
As a workaround I unset LC_ALL before starting navit (i.e. "Exec=unset LC_ALL;
navit" in /usr/share/applications/navit.desktop).
That way your LANG variable keeps set to de_DE.UTF-8
jeremy jozwik wrote:
> 2009/10/31 Łukasz Pankowski :
>
>> - make puzzle digits twice bigger for without glasses readability
>>
>
> i like this one, works well.
>
isn't the point of the puzzle that you cannot read it unless you are
fully awake?
__
Aditya Gandhi wrote:
>
>
>> I dont know about encryption problems
>> And its recursive even after reboot
>> The aux buttin red led starts blinking after about 5-10 secs
>>
>
I got the same problem with mokonnect using wep encryption (blinking aux
light). After switching to wpa2 mokonnect work
Hi everybody,
I have successfully localized my Navit to speak German I thought.
Using SHR on my FR, I have installed every necessary localization packages
(i.e. navit-locale-de and locale-base-de-de) and all speed-dispatcher
packages. To start Navit I use the navit.sh - script from the wiki.
On Sat, 31 Oct 2009 09:21:13 +0100 Matthias Huber
said:
> Carsten Haitzler (The Rasterman) schrieb:
> > On Fri, 30 Oct 2009 19:47:27 +0100 Matthias Huber
> > said:
> >
> >
> >> Laszlo KREKACS schrieb:
> >>
> To not confuse with window changing, I would suggest the following
> s
On Sat, 31 Oct 2009 11:38:59 +0100 Michal Brzozowski said:
> 2009/10/31 Carsten Haitzler
>
> > you pressed just once - or you think you did. but you actually had a press,
> > a
> > release, and a press , release etc. again because your pressure went above,
> > below and above the "pressure leve
On Sat, 31 Oct 2009 09:34:17 +0100 Laszlo KREKACS
said:
> On Sat, Oct 31, 2009 at 9:21 AM, Matthias Huber
> wrote:
> > that's exact what i told you, what openbox has: they say: if movement <
> > number_pixels then its click,
> > if movement >= pixels, its slide.
> >
> > in your case, one could h
2009/10/31 Łukasz Pankowski :
> - make puzzle digits twice bigger for without glasses readability
i like this one, works well.
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
2009/10/31
> So the OSD keyboard inspired by fatfingershell is now quite
> nice and useable, especially since the addition of user feedback
> using vibrator (due to Radics Áron). Also, you can now configure
> the keyboard layout to your will using a simple configuration
> file.
>
I'm curious and
Vikas Saurabh writes:
>> r...@om-gta02 ~ $ ffalarms
>> icalerror.c:99: BADARG: Bad argument to function
>> ffalarms: icalerror.c:100: icalerror_set_errno: Assertion `0' failed.
>> Aborted
>> r...@om-gta02 ~ $
>>
>> any ideas?
> It happened to me as well...and its probably you have got an empty
>
So the OSD keyboard inspired by fatfingershell is now quite
nice and useable, especially since the addition of user feedback
using vibrator (due to Radics Áron). Also, you can now configure
the keyboard layout to your will using a simple configuration
file.
You have a debian package (that's specia
You can run FBreader from QX menu. Open QX, in the left down corner tap
the screen, select Favorites and check E-book reader.
Tips: you can add QX menu to the Favorites, to quickly access its
applications.
Sorry for ugly english, I'm not a native speaker
В Птн, 30/10/2009 в 19:32 +0100, Tor
2009/10/31 Carsten Haitzler
> you pressed just once - or you think you did. but you actually had a press,
> a
> release, and a press , release etc. again because your pressure went above,
> below and above the "pressure level" needed to register a click.
>
What's the "pressure level"? Is it in t
Hi folks,
reverse problem now : I want to migrate contacts from paroli to VCF.
What would be the best solution for me ?
Thanks,
Xavier.
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/communi
Laszlo KREKACS schrieb:
On Sat, Oct 31, 2009 at 9:21 AM, Matthias Huber
wrote:
that's exact what i told you, what openbox has: they say: if movement <
number_pixels then its click,
if movement >= pixels, its slide.
in your case, one could hava a hysteresis over the time: if a single click
c
On Sat, Oct 31, 2009 at 9:21 AM, Matthias Huber
wrote:
> that's exact what i told you, what openbox has: they say: if movement <
> number_pixels then its click,
> if movement >= pixels, its slide.
>
> in your case, one could hava a hysteresis over the time: if a single click
> comes shortly after
Steven ** schrieb:
> I've seen this several times with SHR-Unstable and now with Android.
> So, I'd say it's something that is common among these distro's. Is it
> seen on all distros? Is it the kernel? Hardware bug? Bootloader
> issue?
> Any clues how to debug this or what might cause it?
>
>
Carsten Haitzler (The Rasterman) schrieb:
On Fri, 30 Oct 2009 19:47:27 +0100 Matthias Huber
said:
Laszlo KREKACS schrieb:
To not confuse with window changing, I would suggest the following
scenario:
1. double click for launching an app
why double click ? for me, i am using double cl
2009/10/31 Sean Moss-Pultz :
> On Sat, Oct 31, 2009 at 4:00 AM, David Reyes Samblas Martinez
> wrote:
>> Man, you forget a "," in line 49 on
>> host-tools/offline-renderer/ArticleParser.py
>>
>> (re.compile(r'&([a-zA-Z]{2,8});', re.IGNORECASE), r'&\1;'),<---Here!
>>
>> # change % so php: wr_pa
29 matches
Mail list logo