On Friday 14 May 2010 00:33:48 Gand' wrote:
Do you mean it's significantly more unstable than the v20 ?
'Cause i've been using it for a while, and there was nothing critical in it
...
It should be better then v20, but both have the problem that it eats battery
in suspend - much more then
Oh ok, so i'll give it a try :)
Improved reactivity worth the shorter battery :D
--
Gand'
On Fri, May 14, 2010 at 10:24 AM, Radek Polak pson...@seznam.cz wrote:
On Friday 14 May 2010 00:33:48 Gand' wrote:
Do you mean it's significantly more unstable than the v20 ?
'Cause i've been using
On Friday 14 May 2010 11:52:09 Gand' wrote:
Oh ok, so i'll give it a try :)
Improved reactivity worth the shorter battery :D
I think v22 is most reactive - after debug stuff was removed i subjectively
think it's the fastest what we had.
Regards
Radek
Dr. H. Nikolaus Schaller wrote:
We can soon provide a printed circuit board (Openmoko Beagle) that
can carry a Freerunner display module (incl. touch screen) and is
connected to a Beagleboard. It fits into a (slightly cut) Freerunner
case (although you can do everything without
Hi,
2010/5/14 Georgy wrote:
Hello,
I try it out and it's work with the demo apps.
I try it out with remoco (http://code.google.com/p/remuco/, but crashed
with
message : javax/bluetooth.BluetoothStateException.
Any hint, or apps can't work with PhonetiQ ?
Anyway, thanks for your work
Dr. H. Nikolaus Schaller wrote:
There is now a new Wiki page for the project:
http://wiki.openmoko.org/wiki/Openmoko_Beagle_Hybrid
Kewl. But where's the duct tape ? :-)
I have received some questions why we did not put all this into a nice
design. The main reason is that we can't
saravanan T saravana...@gmail.com writes:
How can I run SHR in the qemu.
What's your objective, man? Why run SHR in emulator when you can run
it natively on any device (including your PC)? What are you trying to
do and why?
--
Be free, use free (http://www.gnu.org/philosophy/free-sw.html)
Am 14.05.2010 um 16:36 schrieb Werner Almesberger:
Dr. H. Nikolaus Schaller wrote:
There is now a new Wiki page for the project:
http://wiki.openmoko.org/wiki/Openmoko_Beagle_Hybrid
Kewl. But where's the duct tape ? :-)
Between PCB and LCM :-)
I have received some questions why we
Am 14.05.2010 um 14:19 schrieb Helge Hafting:
Dr. H. Nikolaus Schaller wrote:
We can soon provide a printed circuit board (Openmoko Beagle) that
can carry a Freerunner display module (incl. touch screen) and is
connected to a Beagleboard. It fits into a (slightly cut) Freerunner
case
Has somebody thought about getting Browser Fennec to SHR?:
support for HTML5:
http://www.mozilla.com/en-US/mobile/
22 December 2009 Firefox for mobile 'days away' from launch:
http://news.bbc.co.uk/2/hi/technology/8425906.stm
Glenn
___
Openmoko
Am Freitag, 14. Mai 2010 20:15:05 schrieb Tom Hacohen:
On Fri, May 14, 2010 at 8:04 PM, Glenn glenn.mh...@gmail.com wrote:
Has somebody thought about getting Browser Fennec to SHR?:
We had it in the past, it just sucks though.
and even more important... it does not build for our arm
Hi,
http://wiki.github.com/paulfertser/fso-el/
M-x fso
I'm pleased to announce here my little pet project, something that is
my only phone UI for more than two weeks already and is almost what i
dreamed of when i was ordering a FreeRunner: it's a
console-compatible, flexible and
Hey all,
First, thanks to Radek and other qt-moko contributors. V22 realy gave us a
quite stable system for daily usage.
Now the phone is working well I'm trying to have some fun with X apps. The
first issue I noted is that a few settings in /opt/qtmoko/etc/qx/profiles.conf
seem to be broken.
Hi,
The new version appears to work fine here (just a quick test so far).
BTW, my Ubuntu laptop (Xubuntu 9.10) exhibits a strange symptom: each time I
connect my FR, the network interface name increases:
eg. it started out with 'eth9' (what happened with usb0?), the next time I
connected the FR
Hello,
I finally found time to test this.
Without a SD card in my FR, I only get the power off button. Cool!
I hav a SD card partitioned like this:
/dev/mmcblk0p1 - vfat, for storage
/dev/mmcblk0p2 - ext3, QtMoko V22
/dev/mmcblk0p3 - ext3, QtMoko V23
/dev/mmcblk0p4 - swap
with the SD card
i'm investigating changing to debian as the os for my fr. it appears i
can use either qtmoko, or the shr suite of apps on top of this. if i
install both, how would i go about choosing which environment (Qt/X)
boots at startup? on my desktop i'd probably see if grub could do it,
but as there is no
16 matches
Mail list logo
