On Tuesday 21 September 2010 21:08:31 Timo Juhani Lindfors wrote:
That is interesting news. Can you point me to the config file and git
hash that you are using so that I can start testing this version too?
http://github.com/radekp/linux-2.6/tree/qtmoko-v27
Config is also supplied as .config
Radek Polak pson...@seznam.cz writes:
I have this file:
/sys/devices/platform/s3c2440-i2c/i2c-0/0-0073/resume_reason
it reads value 000200
I am not using this file for anything so i dont know if it works correctly
In 2.6.29 you have two files
$ cat
still
Map statistics:
--
Nodes: 890297
Sectors: 5101
Segments: 935455
Ways: 105291
Planes: 698047
Countries: 1
Cities: 2
Streets: 0
Addresses: 0
POIs: 21369
Done
both with personally computed boundaries file and precomputed file from
MCnavi site
with this osm file
Hi, list,
Many gossips flying around about bad fr's audio subsystem quality. I
promised to proove that FR audio subsystem is good, just default
headphones quality below anything.
As today finally i overcome my lazyness and soldered 2.5mm-3.5mm jack,
and i am almost content with high sound
On Wed, Sep 22, 2010 at 2:57 PM, Gennady Kupava g...@bsdmn.com wrote:
Hi, list,
ok, now make the speaker actually loud enough to hear and the mic good
enough for others to hear me.
i used to be able to do this in mickey term, but that has since disappeared.
Hi,
the problem is the bass. Initially, It was difficult to hear differences
by playing two sounds one after the other. So until you have listened
music on a bass fixed Freerunner, you would say it is quite ok.
I was only able to hear the difference after taking one original Freerunner
and one
Hi and thank you for testing.
For me it never been an issue. I`m using a little customized profiles
for the alsa states, and i can confirm that sound quality is great. I
used freerunner as AUX source for my car audio some time ago and the
quality was the same as from internal sources (e.g.
7 matches
Mail list logo
