There are 2 different wikireaders available. One with a 2gb card and one
with a 4+gb card. As I understand it, the 2gb only supports a single
language, and the English version is a special one that will fit in 2gb.
The 4+gb version will do multiple languages and other things. Since I am
from th
On 12/21/2010 12:51 PM, Neil Jerram wrote:
On 19 December 2010 14:28, EdorFaus wrote:
When I first started doing this package, I fully intended to keep
maintaining it - but then several things conspired against it, which has
caused it to be unmaintained (by me at least) for a year now...
That
--- On Sat, 12/25/10, Iain B. Findleton wrote:
> The output from
> the chip is quite noisy.
The problem is not that the signal is not reliable: it is. It is just that it
is off by a few degrees.
> There is a script I wrote in TCL
> on the
> SourceForge web site under the fltkwish project page.
Sorry for posting this here, I don't know if there's already a list for
the WR.
I've got a WikiReader now for some month and my 10y daughter
surprisingly likes it, so I finally decided to get one for my parents as
christmas gift.
The one I've got came with english, german and netherlands w
"W. B. Kranendonk" writes:
> I found it after searching for accelerometer-dump, but (the FR)
> didn't have gcc installed and don't know yet which packages to
> install to make it useful. At least a reason now to dive into
> figuring that out :-)
Just capture the data on FR but run it on your PC.
--- On Sat, 12/25/10, Timo Juhani Lindfors wrote:
> "W. B. Kranendonk"
> writes:
> > Would that mean that (one of) the meter(s) is
> connected at an angle?
> > Are they not calibrated in software?
>
> top and bottom accelerometers are oriented differently
> anyway.
Yes, now you say it I recall
Btw, don't know where this is set in qi, but you may try u-boot:
http://wiki.openmoko.org/wiki/U-boot-gena2x
Gennady
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
В Сбт, 25/12/2010 в 19:10 +0300, Ivan Matveev пишет:
> Hello All, Radek
>
> Trying
>
> 2010-12-06 03:03 qi-v30.udfu
> 2010-12-06 02:11 qtmoko-debian-v30.ubi
> 2010-12-06 03:03 uImage-v30.bin
>
> qi complains that lzo compressor is mot compiled in ubifs.
>
>
> _
--- On Sat, 12/25/10, Ivan Matveev wrote:
> > Trying
> >
> > 2010-12-06 03:03 qi-v30.udfu
> > 2010-12-06 02:11 qtmoko-debian-v30.ubi
> > 2010-12-06 03:03 uImage-v30.bin
> >
> I am able to boot with SHR kernel
> uImage-2.6.34-r4-oe15-om-gta02.bin,
> but qpe crashes right after start with SHR k
On Sat, 25 Dec 2010 19:10:31 +0300
Ivan Matveev wrote:
> Hello All, Radek
>
> Trying
>
> 2010-12-06 03:03 qi-v30.udfu
> 2010-12-06 02:11 qtmoko-debian-v30.ubi
> 2010-12-06 03:03 uImage-v30.bin
>
> qi complains that lzo compressor is mot compiled in ubifs.
>
it wasn't qi complaining, it was
I did a lot of work with my FR on the accelerometers. The output from
the chip is quite noisy. There is a script I wrote in TCL on the
SourceForge web site under the fltkwish project page. It may give you
some ideas about that can be done. In my experience, the results vary
depending on which of th
"W. B. Kranendonk" writes:
> Would that mean that (one of) the meter(s) is connected at an angle?
> Are they not calibrated in software?
top and bottom accelerometers are oriented differently anyway.
> Is the accelerometer-dump standalone, and do you have a binary version
> available?
http://
Hello All, Radek
Trying
2010-12-06 03:03 qi-v30.udfu
2010-12-06 02:11 qtmoko-debian-v30.ubi
2010-12-06 03:03 uImage-v30.bin
qi complains that lzo compressor is mot compiled in ubifs.
___
Openmoko community mailing list
community@lists.openmoko.org
h
--- On Sat, 12/25/10, Timo Juhani Lindfors wrote:
> li...@ginger:~$ accelerometer-dump < event4.log | head |
> cut -d ';' -f2-|tr ';' ' '
> x y z
> 108 36 900
> 144 36 900
> 126 36 900
> li...@ginger:~$ accelerometer-dump <
> /dev/accelerometer-top | head | cut -d ';' -f2-|tr ';' ' '
> x y z
> 36
"W. B. Kranendonk" writes:
> See attachment.
li...@ginger:~$ accelerometer-dump < event4.log | head | cut -d ';' -f2-|tr ';'
' '
x y z
108 36 900
144 36 900
126 36 900
126 36 882
144 36 900
126 36 900
126 18 900
126 36 900
126 36 882
li...@ginger:~$ accelerometer-dump < /dev/accelerometer-top |
15 matches
Mail list logo