[debian] won't boot
hi, i recently installed qtmoko v26 on internal flash, and from there used the wiki instructions to install debian on sd. the install ran all the way through, and gave a me a message that all was well. except, it won't boot. i have qi installed, and if i read the wiki correctly, it will auto boot the first os on the sd card, so long as the kernel is in the correct position. so, i put some symlinks in /boot (in the 2nd partition on the sd), pointing to uImage, config and sysmap (in the first partition on the sd). it still won't boot, and i'm a bit lost now. -- robin http://tangleball.org.nz/ - Auckland's Creative Space http://bumblepuppy.org/blog/ ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
qtmoko and ubifs
hi, i tried flashing the latest qtmoko last night - it flashed with no errors, but then wouldn't boot. lots of errors such as: INFO: RCU detected CPU 0 stall (t=4294910048/2000 jiffies) INFO: RCU detected CPU 0 stall (t=4294916048/2000 jiffies) INFO: RCU detected CPU 0 stall (t=4294922048/14000 jiffies) i used a very recent version of neotool (from last week i think), and the version of dfu in ubuntu 10.10 http://qtmoko.org/wiki/Installation#Method_1:_Installing_on_NAND and according to this, that should work or have i missed something? cheers -- robin http://tangleball.org.nz/ - Auckland's Creative Space http://bumblepuppy.org/blog/ ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v31
On 12/31/10, Hrabosh wrote: > BTW ... I§m the only one having difficulties using USB host mode in v31? I don't know about USB host mode, but I can't use usb mass storage with v31. Module g_ether is 'always' busy :) ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Red LED on when new SMS or missed call script
Hi All, I really liked when my old Simenes M65 turned on red LEDs on its side when SMS was received or I had a missed call. I was missing this on FR so I wrote a simple script to do that> I added: CheckForMissed & to my /etc/rc.local to run it automatically when phone starts. The only think I'm not happy about is that when the phone gets suspended, all LEDs are switched off no matter what is in the control files (sys/device/platform...). Hope someone would find it usefull... Zbynek CheckForMissed Description: application/shellscript ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
